On 13 Feb 2013, at 00:14, Cory Smelosky <b4 at gewt.net> wrote:
On 13 Feb 2013, at 00:10, Kari Uusim ki <uusimaki at exdecfinland.org> wrote:
If you have registered and loaded the licenses successfully, but still DECnet-OSI won't start, you might have too few license units for the system type.
Can you tell a bit more about your system and the licenses you are trying to use. THat would be helpful.
On 13.2.2013 6:50, Cory Smelosky wrote:
On 12 Feb 2013, at 23:46, Kari Uusim ki <uusimaki at exdecfinland.org> wrote:
You are not trying to use VMS licenses on Tru64unix, are you?
They aren't compatible, unfortunately. You need real Tru64 licenses.
I am using Tru64 licenses...I just don't know the license names I need...the documentation seems to not be fond of saying...
Kari
On 13.2.2013 4:56, Cory Smelosky wrote:
Hello!
I'm been playing with Tru64 and I managed to get DECnet
installed...some common library files referred to DECNET-OSI-END and
DECNET-OSI-EXT, are these the correct licenses, or need I load others?
NCL continues to complain despite having those licenses loaded.
Any help appreciated...
.
.
REASON: DECnet License Failure
Description: There is a problem with the DECnet License
Reason = License Not Installed
bash-4.0# /usr/sbin/lmf list
Product Status Users: Total Active
DECNET-OSI-END active unlimited
DECNET-OSI-EXT active unlimited
Both have UNITS set to 0.
The shell script that told me these is as follows:
if lmfck DECNET-OSI-EXT DEC 1.0 8-FEB-1993
then
EXTENDED_LICENSE="yes"
else
if lmfck DECNET-OSI-END DEC 1.0 8-FEB-1993
then
END_SYSTEM_LICENSE="yes"
else
Found the problem. Producer was set to something other than DEC. Oops...
On 13 Feb 2013, at 00:10, Kari Uusim ki <uusimaki at exdecfinland.org> wrote:
If you have registered and loaded the licenses successfully, but still DECnet-OSI won't start, you might have too few license units for the system type.
Can you tell a bit more about your system and the licenses you are trying to use. THat would be helpful.
On 13.2.2013 6:50, Cory Smelosky wrote:
On 12 Feb 2013, at 23:46, Kari Uusim ki <uusimaki at exdecfinland.org> wrote:
You are not trying to use VMS licenses on Tru64unix, are you?
They aren't compatible, unfortunately. You need real Tru64 licenses.
I am using Tru64 licenses...I just don't know the license names I need...the documentation seems to not be fond of saying...
Kari
On 13.2.2013 4:56, Cory Smelosky wrote:
Hello!
I'm been playing with Tru64 and I managed to get DECnet
installed...some common library files referred to DECNET-OSI-END and
DECNET-OSI-EXT, are these the correct licenses, or need I load others?
NCL continues to complain despite having those licenses loaded.
Any help appreciated...
.
.
REASON: DECnet License Failure
Description: There is a problem with the DECnet License
Reason = License Not Installed
bash-4.0# /usr/sbin/lmf list
Product Status Users: Total Active
DECNET-OSI-END active unlimited
DECNET-OSI-EXT active unlimited
Both have UNITS set to 0.
The shell script that told me these is as follows:
if lmfck DECNET-OSI-EXT DEC 1.0 8-FEB-1993
then
EXTENDED_LICENSE="yes"
else
if lmfck DECNET-OSI-END DEC 1.0 8-FEB-1993
then
END_SYSTEM_LICENSE="yes"
else
If you have registered and loaded the licenses successfully, but still DECnet-OSI won't start, you might have too few license units for the system type.
Can you tell a bit more about your system and the licenses you are trying to use. THat would be helpful.
On 13.2.2013 6:50, Cory Smelosky wrote:
On 12 Feb 2013, at 23:46, Kari Uusim ki <uusimaki at exdecfinland.org> wrote:
You are not trying to use VMS licenses on Tru64unix, are you?
They aren't compatible, unfortunately. You need real Tru64 licenses.
I am using Tru64 licenses...I just don't know the license names I need...the documentation seems to not be fond of saying...
Kari
On 13.2.2013 4:56, Cory Smelosky wrote:
Hello!
I'm been playing with Tru64 and I managed to get DECnet
installed...some common library files referred to DECNET-OSI-END and
DECNET-OSI-EXT, are these the correct licenses, or need I load others?
NCL continues to complain despite having those licenses loaded.
Any help appreciated...
.
.
On 12 Feb 2013, at 23:58, Dave McGuire <mcguire at neurotica.com> wrote:
On 02/12/2013 11:54 PM, Cory Smelosky wrote:
You are not trying to use VMS licenses on Tru64unix, are you?
They aren't compatible, unfortunately. You need real Tru64
licenses.
I am using Tru64 licenses...I just don't know the license names
I need...the documentation seems to not be fond of saying...
Can you run "strings" on the binary and see if you can find out
what it wants?
Ran it on the binaries, the libraries, and finally found the licenses
mentioned in a shell script that is part of the kernel module rebuild
procedure. I loaded those and NCL still complains...maybe I need to
reinstall the subsets?
This ain't Windows, man. There's gotta be something else going on.
Maybe I need to recompile the kernel? ;)
I think there is an in-kernel license cache of some sort...perhaps not having the licenses loaded at install affected the way the module was built?
Has to either be that, a trailing space, or incorrect license names.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 02/12/2013 11:54 PM, Cory Smelosky wrote:
You are not trying to use VMS licenses on Tru64unix, are you?
They aren't compatible, unfortunately. You need real Tru64
licenses.
I am using Tru64 licenses...I just don't know the license names
I need...the documentation seems to not be fond of saying...
Can you run "strings" on the binary and see if you can find out
what it wants?
Ran it on the binaries, the libraries, and finally found the licenses
mentioned in a shell script that is part of the kernel module rebuild
procedure. I loaded those and NCL still complains...maybe I need to
reinstall the subsets?
This ain't Windows, man. There's gotta be something else going on.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 12 Feb 2013, at 23:51, Dave McGuire <mcguire at neurotica.com> wrote:
On 02/12/2013 11:50 PM, Cory Smelosky wrote:
You are not trying to use VMS licenses on Tru64unix, are you? They
aren't compatible, unfortunately. You need real Tru64 licenses.
I am using Tru64 licenses...I just don't know the license names I
need...the documentation seems to not be fond of saying...
Can you run "strings" on the binary and see if you can find out what
it wants?
Ran it on the binaries, the libraries, and finally found the licenses mentioned in a shell script that is part of the kernel module rebuild procedure. I loaded those and NCL still complains...maybe I need to reinstall the subsets?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 02/12/2013 11:50 PM, Cory Smelosky wrote:
You are not trying to use VMS licenses on Tru64unix, are you? They
aren't compatible, unfortunately. You need real Tru64 licenses.
I am using Tru64 licenses...I just don't know the license names I
need...the documentation seems to not be fond of saying...
Can you run "strings" on the binary and see if you can find out what
it wants?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 12 Feb 2013, at 23:46, Kari Uusim ki <uusimaki at exdecfinland.org> wrote:
You are not trying to use VMS licenses on Tru64unix, are you?
They aren't compatible, unfortunately. You need real Tru64 licenses.
I am using Tru64 licenses...I just don't know the license names I need...the documentation seems to not be fond of saying...
Kari
On 13.2.2013 4:56, Cory Smelosky wrote:
Hello!
I'm been playing with Tru64 and I managed to get DECnet
installed...some common library files referred to DECNET-OSI-END and
DECNET-OSI-EXT, are these the correct licenses, or need I load others?
NCL continues to complain despite having those licenses loaded.
Any help appreciated...
.
You are not trying to use VMS licenses on Tru64unix, are you?
They aren't compatible, unfortunately. You need real Tru64 licenses.
Kari
On 13.2.2013 4:56, Cory Smelosky wrote:
Hello!
I'm been playing with Tru64 and I managed to get DECnet
installed...some common library files referred to DECNET-OSI-END and
DECNET-OSI-EXT, are these the correct licenses, or need I load others?
NCL continues to complain despite having those licenses loaded.
Any help appreciated...
.
Hello!
I'm been playing with Tru64 and I managed to get DECnet
installed...some common library files referred to DECNET-OSI-END and
DECNET-OSI-EXT, are these the correct licenses, or need I load others?
NCL continues to complain despite having those licenses loaded.
Any help appreciated...
