HECnet

hecnet@lists.dfupdate.se

2 participants
15583 discussions

PDXVAX - 40MB Memory - VAXstation 4000/VLC?

by sampsa＠mac.com

Oh, and all my nodes (including CHIMP) are based in London, England - none are in Finland anymore. Sampsa On 19 Oct 2009, at 15:42, Sampsa Laine wrote: Couple of additions to the list: 1.403 - RHESUS - HP Integrity rx2600 running OpenVMS 8.3-1H1 1.404 - SAMDEV - Random development node, might be anything from a SIMH VAX to Linux 1.405 - ARIVAX - SIMH-VAX running OpenVMS 8.3 1.410 - FIDOGW - Ubuntu 9.04 (on VMware) with DECNET, running Fidonet-HECnet mail gateway. Sampsa On 19 Oct 2009, at 15:35, Bob Armstrong wrote: Where is PDXVAX still noted as a 4000/VLC? Well, on my list for one. http://www.sparetimegizmos.com/Downloads/DCN%20Node%20List.pdf Nobody sent me any corrections ... Bob

16 years

PDXVAX - 40MB Memory - VAXstation 4000/VLC?

by sampsa＠mac.com

Couple of additions to the list: 1.403 - RHESUS - HP Integrity rx2600 running OpenVMS 8.3-1H1 1.404 - SAMDEV - Random development node, might be anything from a SIMH VAX to Linux 1.405 - ARIVAX - SIMH-VAX running OpenVMS 8.3 1.410 - FIDOGW - Ubuntu 9.04 (on VMware) with DECNET, running Fidonet-HECnet mail gateway. Sampsa On 19 Oct 2009, at 15:35, Bob Armstrong wrote: Where is PDXVAX still noted as a 4000/VLC? Well, on my list for one. http://www.sparetimegizmos.com/Downloads/DCN%20Node%20List.pdf Nobody sent me any corrections ... Bob

16 years

PDXVAX - 40MB Memory - VAXstation 4000/VLC?

by bob＠jfcl.com

Where is PDXVAX still noted as a 4000/VLC? Well, on my list for one. http://www.sparetimegizmos.com/Downloads/DCN%20Node%20List.pdf Nobody sent me any corrections ... Bob

16 years

PDXVAX - 40MB Memory - VAXstation 4000/VLC?

by healyzh＠aracnet.com

At 1:46 PM +0100 10/19/09, Mark Wickens wrote: I noted a couple of weeks ago that PDXVAX is listed as a VAXstation 4000/VLC with 40MB of memory. Is this true? If it is, can someone tell me what memory chips are installed, as I have a 4000/VLC which is 'apparently' maxed out at 24 MB (6 SIMMS) Regards, Mark (wondering whether the 32MB min. RAM requirement for ALL-IN-1 is hard and fast) Where is PDXVAX still noted as a 4000/VLC? The fans went out before everything went crazy for us. It's been a 4000/60 for a while now. No idea on the RAM requirements for ALL-IN-1. My big problem is that it doesn't seem to want to install on modern versions of OpenVMS/Alpha. You now have me thinking about how I could install it on PDXVAX. Zane -- | Zane H. Healy | UNIX Systems Administrator | | healyzh at aracnet.com (primary) | OpenVMS Enthusiast | | MONK::HEALYZH (DECnet) | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | PDP-10 Emulation and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ |

16 years

PDXVAX - 40MB Memory - VAXstation 4000/VLC?

by mark＠wickensonline.co.uk

On Mon, 2009-10-19 at 13:46 +0100, Mark Wickens wrote: I noted a couple of weeks ago that PDXVAX is listed as a VAXstation 4000/VLC with 40MB of memory. Is this true? If it is, can someone tell me what memory chips are installed, as I have a 4000/VLC which is 'apparently' maxed out at 24 MB (6 SIMMS) OK, so I managed to answer my own question with this query on PDXVAX: $ write sys$output f$getsyi("HW_NAME") VAXstation 4000-60 I guess the VLC got replaced at some point (have to say that the box did feel a little quick for a VLC :) Regards, Mark (wondering whether the 32MB min. RAM requirement for ALL-IN-1 is hard and fast) Would appear to be only one way to find out...

16 years

PDXVAX - 40MB Memory - VAXstation 4000/VLC?

by mark＠wickensonline.co.uk

I noted a couple of weeks ago that PDXVAX is listed as a VAXstation 4000/VLC with 40MB of memory. Is this true? If it is, can someone tell me what memory chips are installed, as I have a 4000/VLC which is 'apparently' maxed out at 24 MB (6 SIMMS) Regards, Mark (wondering whether the 32MB min. RAM requirement for ALL-IN-1 is hard and fast)

16 years

DECNET over PPP?

by sampsa＠mac.com

I recently came across this: "RFC1762 - The PPP DECnet Phase IV Control Protocol (DNCP)" -- (http://www.faqs.org/rfcs/rfc1762.html) What kind of software/hardware supports this? Anyone interested in having a play if it's deployable with reasonable effort? Sampsa

16 years

Suggestion for hosts with FAL default account enabled.

by sampsa＠mac.com

Good idea - done! Sampsa On 15 Oct 2009, at 17:13, Fred wrote: On Wed, 14 Oct 2009, Sampsa Laine wrote: The obvious thing to add is a HECNETINFO command, that displays this file on a given host - we want this information to be easily accessible from the DCL side as well rather than just the Web, I think. Could it be as simple as (predicated upon you having this command in the DECNet default directory): @CHIMPY::HECNETINFO <nodname> Users could also copy it locally if they saw fit. Fred ---- Lets call it for what it is - "legacy" is a term that people use in a polite but derogatory manner to imply that the future direction they prefer is not that which they view as the current direction.

16 years

Re: HECnet

by bqt＠softjar.se

Looks like you are bouncing between two routers, one of which is faulty at the moment (PONDUS). Why you would get to PONDUS, I don't know. I know it is faulty because adjacency is down. The problem with PONDUS is that it can stop receiving ethernet packets, but is still sending. There is a bug somewhere inside the DECnet driver, which I'd like to find, if I just had the sources... I'll have someone kick on PONDUS on sunday, when someone is physically close to the machine again. An endnode normally should pick the router with the highest priority, which can be heard. MIM is at 96, and should be picked, unless something else is funny. PONDUS should only be at 64, even if it is working. Johnny Oleg Safiullin wrote: Hi. Is something wrong with subj? At XPEH console (OpenVMS VAX 7.3, non-routing) I seee the following messages (repeated continuously): -- %%%%%%%%%%% OPCOM 15-OCT-2009 14:56:05.84 %%%%%%%%%%% Message from user DECNET on XPEH DECnet event 4.15, adjacency up

16 years

Suggestion for hosts with FAL default account enabled.

by fcoffey＠thrifty.misernet.net

On Wed, 14 Oct 2009, Sampsa Laine wrote: The obvious thing to add is a HECNETINFO command, that displays this file on a given host - we want this information to be easily accessible from the DCL side as well rather than just the Web, I think. Could it be as simple as (predicated upon you having this command in the DECNet default directory): @CHIMPY::HECNETINFO <nodname> Users could also copy it locally if they saw fit. Fred ---- Lets call it for what it is - "legacy" is a term that people use in a polite but derogatory manner to imply that the future direction they prefer is not that which they view as the current direction.

16 years

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet