Can't help you with Google Books iPhone app. However you can download book
in PDF format, add it to iTunes and read it on iPhone via iBooks app.
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf
Of Brian Hechinger
Sent: Sunday, January 01, 2012 12:47 AM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Found free good DECnet books
I sure wish I could figure out Google Books. Have the first book in my books
but the Google Books app on my iPhone doesn't see it. :(
-brian
On Dec 29, 2011, at 16:05, "Pinocchio" <pinoccio at gmx.com> wrote:
Hi all!
Recently, while searching for good DNA and DECnet source (besides ODL) I
found two wonderful books freely and completely available to anyone via
Google Books:
1) McGraw-Hill 1989, Malamud, DEC networks and architectures
http://books.google.com/books?id=0CciAQAAIAAJ&printsec=frontcover&hl=uk
2) VNR 1991, Malamud, Analyzing DECnet OSI phase V
http://books.google.com/books?id=fPJSAAAAMAAJ&printsec=frontcover&hl=uk
Bob,
I really am wanting to use DDCMP for learning purposes. I want to build a decnet phase IV network with DDCMP, however, I want to also have the ability to pass traffic through to connect to additional nodes that are net connected.
Kevin
To: hecnet at Update.UU.SE
Date: Sat, 31 Dec 2011 16:41:02 -0800
Subject: Re: SV: RE: [HECnet] Hecnet and DDCMP
From: bob at jfcl.com
What is it that you actually want to connect? For the most part, a Multinet link simulates the "user experience" of a DDCMP connection tunneled over IP. Multinet is a point-to-point DECnet circuit which, except for the device names, is functionally identical to any DDCMP link.
The only reason I can see for using a real DDCMP serial connection (either sync or async) would be to connect a machine that didn't support an Ethernet interface.
Bob
I don't think cisco supports DDCMP, only HDLC for this...I looked into it. I hope I am wrong though.
Kevin
Subject: Re: [HECnet] Hecnet and DDCMP
From: wonko at 4amlunch.net
Date: Sat, 31 Dec 2011 17:44:11 -0500
To: hecnet at Update.UU.SE
Johnny, do you still have a copy of the serial version of your bridge program?
Alternatively I believe you can tunnel serial over IP with a pair of Cisco routers.
-brian
On Dec 31, 2011, at 16:30, The Presence <tpresence at hotmail.com> wrote:
Nice!
Any documentation/software out there that will help me do this? I have been looking around, and have seen some commentary about it, but nothing about how to get it accomplished.
Kevin
Subject: Re: [HECnet] Hecnet and DDCMP
From: wonko at 4amlunch.net
Date: Sat, 31 Dec 2011 13:59:00 -0500
To: hecnet at Update.UU.SE
Heh, we were just talking about that. That's how the original HECnet worked. :)
-brian
On Dec 31, 2011, at 12:46, The Presence <tpresence at hotmail.com> wrote:
Hey guys,
Has anyone worked out a mechanism to connect a node to hecnet using DDCMP? Perhaps some tunneling technology over IP, or virtualized serial?
Kevin
I probably have sources somewhere, but I don't know when I have time to extract them.
However the idea is very simple - just a small program hat reads from a serial port and sends the data to a tcp socket, and reads from a tcp socket and sends to a serial port. Nothing more to it. Of course there are some details to pay attention to, but if you know how to write software for this kind of stuff, it's not hard.
Johnny
--
I sure wish I could figure out Google Books. Have the first book in my books but the Google Books app on my iPhone doesn't see it. :(
-brian
On Dec 29, 2011, at 16:05, "Pinocchio" <pinoccio at gmx.com> wrote:
Hi all!
Recently, while searching for good DNA and DECnet source (besides ODL) I
found two wonderful books freely and completely available to anyone via
Google Books:
1) McGraw-Hill 1989, Malamud, DEC networks and architectures
http://books.google.com/books?id=0CciAQAAIAAJ&printsec=frontcover&hl=uk
2) VNR 1991, Malamud, Analyzing DECnet OSI phase V
http://books.google.com/books?id=fPJSAAAAMAAJ&printsec=frontcover&hl=uk
Johnny, do you still have a copy of the serial version of your bridge program?
Alternatively I believe you can tunnel serial over IP with a pair of Cisco routers.
-brian
On Dec 31, 2011, at 16:30, The Presence <tpresence at hotmail.com> wrote:
Nice!
Any documentation/software out there that will help me do this? I have been looking around, and have seen some commentary about it, but nothing about how to get it accomplished.
Kevin
Subject: Re: [HECnet] Hecnet and DDCMP
From: wonko at 4amlunch.net
Date: Sat, 31 Dec 2011 13:59:00 -0500
To: hecnet at Update.UU.SE
Heh, we were just talking about that. That's how the original HECnet worked. :)
-brian
On Dec 31, 2011, at 12:46, The Presence <tpresence at hotmail.com> wrote:
Hey guys,
Has anyone worked out a mechanism to connect a node to hecnet using DDCMP? Perhaps some tunneling technology over IP, or virtualized serial?
Kevin
Nice!
Any documentation/software out there that will help me do this? I have been looking around, and have seen some commentary about it, but nothing about how to get it accomplished.
Kevin
Subject: Re: [HECnet] Hecnet and DDCMP
From: wonko at 4amlunch.net
Date: Sat, 31 Dec 2011 13:59:00 -0500
To: hecnet at Update.UU.SE
Heh, we were just talking about that. That's how the original HECnet worked. :)
-brian
On Dec 31, 2011, at 12:46, The Presence <tpresence at hotmail.com> wrote:
Hey guys,
Has anyone worked out a mechanism to connect a node to hecnet using DDCMP? Perhaps some tunneling technology over IP, or virtualized serial?
Kevin
Heh, we were just talking about that. That's how the original HECnet worked. :)
-brian
On Dec 31, 2011, at 12:46, The Presence <tpresence at hotmail.com> wrote:
Hey guys,
Has anyone worked out a mechanism to connect a node to hecnet using DDCMP? Perhaps some tunneling technology over IP, or virtualized serial?
Kevin
I don't have access at the moment. Could you email me the file ?
Dan
On 31 Dec 2011, at 16:09, "hvlems at zonnet.nl" <hvlems at zonnet.nl> wrote:
Some mailboxes cannot handle the size of the spreadsheet files.
They are now also on OZON::
Hans
