Hans Vlems <hvlems at zonnet.nl> writes:
On ODS-2 you'd make this work with set file/enter.
That is if my memory isn't pulling my leg again ;(
Verzonden vanaf mijn BlackBerry 10-smartphone.
=A0 Origineel bericht =A0
Van: Sampsa Laine
Verzonden: donderdag 29 januari 2015 22:25
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] Hard and soft links in VMS 8,3 AXP?
I've been looking everywhere for some help on how to create a link (symboli=
c or hardlink, I'm good with either) to a directory in another.
Basically, I have a bunch of files I want to share using both FAL and HTTP =
(Apache).
So let's say I have the source dir, DKA0:[FOOBAR]SOURCE.DIR and I want to m=
ake a link of that directory to APACHE$ROOT:[HTDOCS] so that APACHE$ROOT:[H=
TDOCS.SOURCE] and DKA0:[FOOBAR.SOURCE] are the same thing?
Sampsa
PS: I'm obviously on an ODS-5 system.
If APACHE$ROOT is a rooted logical with DKA0: as its disk device designation,
you can use a long standing VMS file system feature: SET FILE/ENTER. There's
also the symlink feature which you use via SET FILE/SYMLINK. $ HELP abounds
for both commands.
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
I speak to machines with the voice of humanity.
I think that only works for files, not directories.
I KNOW i've made a link between directories on VMS, I just can't remember the command and there's nothing in HELP..
Or Google.
sampsa
On 30 Jan 2015, at 00:08, Hans Vlems <hvlems at zonnet.nl> wrote:
On ODS-2 you'd make this work with set file/enter.
That is if my memory isn't pulling my leg again ;(
Verzonden vanaf mijn BlackBerry 10-smartphone.
Origineel bericht
Van: Sampsa Laine
Verzonden: donderdag 29 januari 2015 22:25
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] Hard and soft links in VMS 8,3 AXP?
I've been looking everywhere for some help on how to create a link (symbolic or hardlink, I'm good with either) to a directory in another.
Basically, I have a bunch of files I want to share using both FAL and HTTP (Apache).
So let's say I have the source dir, DKA0:[FOOBAR]SOURCE.DIR and I want to make a link of that directory to APACHE$ROOT:[HTDOCS] so that APACHE$ROOT:[HTDOCS.SOURCE] and DKA0:[FOOBAR.SOURCE] are the same thing?
Sampsa
PS: I'm obviously on an ODS-5 system.
On ODS-2 you'd make this work with set file/enter.
That is if my memory isn't pulling my leg again ;(
Verzonden vanaf mijn BlackBerry 10-smartphone.
Origineel bericht
Van: Sampsa Laine
Verzonden: donderdag 29 januari 2015 22:25
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] Hard and soft links in VMS 8,3 AXP?
I've been looking everywhere for some help on how to create a link (symbolic or hardlink, I'm good with either) to a directory in another.
Basically, I have a bunch of files I want to share using both FAL and HTTP (Apache).
So let's say I have the source dir, DKA0:[FOOBAR]SOURCE.DIR and I want to make a link of that directory to APACHE$ROOT:[HTDOCS] so that APACHE$ROOT:[HTDOCS.SOURCE] and DKA0:[FOOBAR.SOURCE] are the same thing?
Sampsa
PS: I'm obviously on an ODS-5 system.
I've been looking everywhere for some help on how to create a link (symbolic or hardlink, I'm good with either) to a directory in another.
Basically, I have a bunch of files I want to share using both FAL and HTTP (Apache).
So let's say I have the source dir, DKA0:[FOOBAR]SOURCE.DIR and I want to make a link of that directory to APACHE$ROOT:[HTDOCS] so that APACHE$ROOT:[HTDOCS.SOURCE] and DKA0:[FOOBAR.SOURCE] are the same thing?
Sampsa
PS: I'm obviously on an ODS-5 system.
Being a retard, I only tested the scripts under my own account - they were of course totally broken under a captive account.
It should work now, for those of you are interested (Tradewars 2002 really is quite a good game, and the backgammon does rock).
sampsa
On 26 Jan 2015, at 22:54, Sampsa Laine <sampsa at mac.com> wrote:
Oh, forgot to mention, log in as "16BIT" to launch these.
sampsa
On 26 Jan 2015, at 22:51, Sampsa Laine <sampsa at mac.com> wrote:
CHIMPY:: has just signed up with BBS Interlink to provide retro door games for anyone, well, connecting to CHIMPY.
The games run on a shared server so you might encounter up to dozens of players online at once, so not exactly an MMO portal but good fun to be had still (especially Global Backgammon, still my favourite backgammon game for over 20 years).
Anyway, the games on offer are:
Global War (risk clone)
Global Backgammon
LORD
LORD 2
Planets: TEOS
Operation: Overkill 2
Trade Wars 2002
Pimp Wars
Lunatix
BBS Crash
Enjoy.
sampsa
On Sat, 24 Jan 2015, Mark Wickens wrote:
Yes DS12887A is the right part number. Or search online how to cut the
top off and add your own battery. These are generally available on eBay
from China as well.
NB the original is actually a DS1287A rather than a DS12887A. While
being pin compatible they are not identical and the difference between the
two is the latter has 128 bytes of internal addressable locations while
the former only has 64 bytes, and consequently ignores the value of bit #6
written to the address register. So hope that no clever software relies
on that bit being ignored before assuming a DS12887A can replace a
DS1287A!
Maciej
--
DECtec mailing list
http://dectec.info
To unsubscribe from this list see page at: http://dectec.info/mailman/listinfo/dectec_dectec.info
Come to Asia, where you can live the dream of both high volage, *and* crap
wiring. Not to mention a mixture of fuses, and breakers. And it seems
every time I pop open anything with a fuse, it's rated for something
insanely high like 13A @ 220V for a simple fan..
But at least in HK we don't have the 50/60Hz split of Japan.
-----Original Message-----
From: Hans Vlems [mailto:hvlems at zonnet.nl]
Sent: Monday, January 26, 2015 6:19 PM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Number of nodes online a bit low?
You can touch a live wire here and provided it's just one hand and your feet
aren't in salty water nothing much will happen. Higher frequencies will pass
your skin more readily. I'd rather touch 230V/50Hz than 80V/1000Hz.
Verzonden vanaf mijn BlackBerry 10-smartphone.
Origineel bericht
Van: Johnny Billquist
Verzonden: maandag 26 januari 2015 17:49
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Number of nodes online a bit low?
On 2015-01-26 17:40, John Wilson wrote:
From: Johnny Billquist <bqt at softjar.se>
This is Europe, remember...
Normal mains are 230V, and 3-phase are 410V phase to phase. All the DEC
equipment around here are designed to run on that stuff.
Sure ... I remember reading the back plate on a dryer at a laundromat once
(in I forget which country) and suddenly not wanting to touch it any more.
I just have trouble getting used to the fact that although you *already*
run most things at what Americans would consider double voltage, you
*still*
double the voltage for the big toys (things which we grudgingly whip out
the 230 VAC for). But then again, once it's lethal, I suppose it doesn't
matter how lethal. And copper costs more than insulation so being able
to use wimpier wire for the same wattage is good design. Less loss too.
Plus, this is stuff you pretty much never unplug/replug, so your fingers
are almost never near the live prongs. Still ... around here, it's hard
to find wire that's insulated for more than 300V.
Yeah... That "lethal" aspect have never been my issue. 110V or 230V. Who
cares? If it comes to the wrong place, either will kill me.
And just through two fingers on the same hand, they both just annoy the
hell out of me, and I swear loudly for a few minutes...
I am much more nervous about the (to my view) really crappy and scary
plugs you use in the US. They actually have a fair chance of actually
exposing me to contact...
You really cannot touch the prongs when they have power on plugs around
here...
Johnny
CHIMPY:: has just signed up with BBS Interlink to provide retro door games for anyone, well, connecting to CHIMPY.
The games run on a shared server so you might encounter up to dozens of players online at once, so not exactly an MMO portal but good fun to be had still (especially Global Backgammon, still my favourite backgammon game for over 20 years).
Just as a reminder, BITXT1 hosts DECWAR, and it should be accessible from anywhere in HECNET. ;)
Oh, forgot to mention, log in as "16BIT" to launch these.
sampsa
On 26 Jan 2015, at 22:51, Sampsa Laine <sampsa at mac.com> wrote:
CHIMPY:: has just signed up with BBS Interlink to provide retro door games for anyone, well, connecting to CHIMPY.
The games run on a shared server so you might encounter up to dozens of players online at once, so not exactly an MMO portal but good fun to be had still (especially Global Backgammon, still my favourite backgammon game for over 20 years).
Anyway, the games on offer are:
Global War (risk clone)
Global Backgammon
LORD
LORD 2
Planets: TEOS
Operation: Overkill 2
Trade Wars 2002
Pimp Wars
Lunatix
BBS Crash
Enjoy.
sampsa
CHIMPY:: has just signed up with BBS Interlink to provide retro door games for anyone, well, connecting to CHIMPY.
The games run on a shared server so you might encounter up to dozens of players online at once, so not exactly an MMO portal but good fun to be had still (especially Global Backgammon, still my favourite backgammon game for over 20 years).
Anyway, the games on offer are:
Global War (risk clone)
Global Backgammon
LORD
LORD 2
Planets: TEOS
Operation: Overkill 2
Trade Wars 2002
Pimp Wars
Lunatix
BBS Crash
Enjoy.
sampsa