Interesting! I see 4 manuals for the DECmpp . That looks familiar, but I though that this was only a design circulating around DEC and not something that ever became a product. It looks like it did. Up to 16 processor cards with 1024 processors each. Neat.
paul
On May 21, 2014, at 1:44 PM, Mark Wickens <mark at wickensonline.co.uk> wrote:
Came across this link: http://decdoc.itsx.net/dec94mds/
On Wed, 21 May 2014, Cory Smelosky wrote:
Sent from mobile device that advertises itself for no good reason
On 21 May 2014, at 03:26, Johnny Billquist <bqt at softjar.se> wrote:
On 2014-05-21 05:14, Cory Smelosky wrote:
If only I could use the LTC from my busted 11/23+ :(
Hmm. Hang on. The 11/23 you have (also an 11-23+ I think we now have established) have the clock device on the CPU card, unless I remember wrong.
So you all need is a clock signal on the backplane. That is available in a BA23. Comes from the power supply.
The dual height module has the clock too? Huh. I do have a BA23 PSU so I can do this.
I have no card cage...but I have everything else needed to use it
My actual chassis from the BA23 is gone...the BA23's supply needs forced airflow right?
Johnny
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
Sent from mobile device that advertises itself for no good reason
On 21 May 2014, at 03:26, Johnny Billquist <bqt at softjar.se> wrote:
On 2014-05-21 05:14, Cory Smelosky wrote:
If only I could use the LTC from my busted 11/23+ :(
Hmm. Hang on. The 11/23 you have (also an 11-23+ I think we now have established) have the clock device on the CPU card, unless I remember wrong.
So you all need is a clock signal on the backplane. That is available in a BA23. Comes from the power supply.
The dual height module has the clock too? Huh. I do have a BA23 PSU so I can do this.
I have no card cage...but I have everything else needed to use it
Johnny
Sent from mobile device that advertises itself for no good reason
On 20 May 2014, at 21:43, Cory Smelosky <b4 at gewt.net> wrote:
On Tue, 20 May 2014, John Wilson wrote:
From: Cory Smelosky <b4 at gewt.net>
If the MicroPDP-11/73 front panel included an LTC I would be set to get
RSX-11M+ up with 1M of RAM TONIGHT. I don't have a dedicated clock
device. :(
Easily hacked up:
http://www.dbit.com/pub/pic/kw11l.asm
I used this (on a small piece of perfboard dangling from wires wrapped
directly into the backplane and wrapped in paper) to get RSX11M+ running
on a dual-height 11/73 with a 2 MB RAM card and a CQD-220 (with a Fuji
DynaMO), all on a four-slot dual-height backplane (in a BA11-VA) which
had the wires added for Q22. An 8-pin PIC is fine (with code updated as
needed) but 16F84s were what I had on hand (along with a homemade burner).
I PROBABLY have a PIC around here somewhere...but I don't know where and I know I DEFINTIELY don't have a crystal of that frequency. I have an arduino that I SUPPOSE could be hacked to work.
Does the bus itself need any special configuration? I DO have the front panel with an LTC from the NETCOM I can borrow for awhile (No need for it until I patch ZRQCH0. It looks to connect to the normal bit on the backplane where the front panel does. I can order the parts in the meantime if I do this)
John Wilson
D Bit
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 05/20/2014 07:18 PM, Johnny Billquist wrote:
...and won't run on my 11/34, for example. ;) (I *think*...right?)
Remember, while I do use simh quite a bit, I'm primarily based on real
hardware here, and I can't do "set cpu .." on that. ;)
Well, yes, M+ does not officially support the 11/34.
However, there was a third-party (or several) that added a 22-bit MMU to
the 11/34, looking like an 11/24.
And you could of course try to generate an unsupported M+ system with
18-bit addressing. I have never tried it in practice, but there is code
inside M+ for this thing...
That'd be fun to try! I may have to do that at some point.
Yeah. My IP will not run on such machines, and I have no plans on ever
implementing it. It could be done, of course, but the work is no fun,
and I have so many other more important things to waste my time on...
:-)
Well I'd be one user, if you ever decide to do it. I'd then bring up
the world's first PDP-11/34-based web server!
:-)
It's just a lot of work. First and foremost, the TCP driver would need
to be chopped up, since it is today somewhere around 15K, and that would
need to be divided into two segments of less than 8K, and then I'd have
to do the calling between the segments. Second, a few tools like
IFCONFIG would have to become overlaid in order to fit into memory. That
is not as much work, though.
Yuck! :-(
Start by getting some "modern" hardware instead, and run proper M+. :-)
And then start writing some code to play with the network from RSX. It's
really easy to write clients or servers under RSX.
I've got a LOT of PDP-11 hardware here; many of my machines are M+
capable. As I explained, I just have a personal attachment to RSX11M in
particular, and the 11/34 in particular...it'd just be neat to run IP on
it, that's all, but I really have no problem with never being able to.
I have plenty of other machines on which to run your IP stack, and I
surely will at some point soon.
I've done a C library and a BASIC+2 library so far, which are really
easy to use. F77 and Pascal is on the list of things to do.
That'll be great! I need to carve out some time to dedicate to that.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 2014-05-21 05:14, Cory Smelosky wrote:
If only I could use the LTC from my busted 11/23+ :(
Hmm. Hang on. The 11/23 you have (also an 11-23+ I think we now have established) have the clock device on the CPU card, unless I remember wrong.
So you all need is a clock signal on the backplane. That is available in a BA23. Comes from the power supply.
Johnny
Sent from mobile device that advertises itself for no good reason
On 20 May 2014, at 21:43, Cory Smelosky <b4 at gewt.net> wrote:
On Tue, 20 May 2014, John Wilson wrote:
From: Cory Smelosky <b4 at gewt.net>
If the MicroPDP-11/73 front panel included an LTC I would be set to get
RSX-11M+ up with 1M of RAM TONIGHT. I don't have a dedicated clock
device. :(
Easily hacked up:
http://www.dbit.com/pub/pic/kw11l.asm
I used this (on a small piece of perfboard dangling from wires wrapped
directly into the backplane and wrapped in paper) to get RSX11M+ running
on a dual-height 11/73 with a 2 MB RAM card and a CQD-220 (with a Fuji
DynaMO), all on a four-slot dual-height backplane (in a BA11-VA) which
had the wires added for Q22. An 8-pin PIC is fine (with code updated as
needed) but 16F84s were what I had on hand (along with a homemade burner).
I PROBABLY have a PIC around here somewhere...but I don't know where and I know I DEFINTIELY don't have a crystal of that frequency. I have an arduino that I SUPPOSE could be hacked to work.
Does the bus itself need any special configuration? I DO have the front panel with an LTC from the NETCOM I can borrow for awhile (No need for it until I patch ZRQCH0. It looks to connect to the normal bit on the backplane where the front panel does. I can order the parts in the meantime if I do this)
John Wilson
D Bit
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
