HECnet May 2013

hecnet@lists.dfupdate.se

38 participants
680 discussions

by sampsa＠mac.com

On 7 May 2013, at 19:58, Sampsa Laine <sampsa at mac.com> wrote: On 7 May 2013, at 19:52, Johnny Billquist <bqt at softjar.se> wrote: Spinning display means it has booted and everything is up and running. Johnny Will try to connect to it via ethernet.. No luck. It's borked. Well, beyond my capacity to fix it anyway :)

11 years, 6 months

DECSERVER 300 software?

by b4＠gewt.net

On Tue, 7 May 2013, Sampsa Laine wrote: On 7 May 2013, at 19:13, Johnny Billquist <bqt at softjar.se> wrote: On 2013-05-07 19:00, Sampsa Laine wrote: Yeah, I'll try to get it working, I have NO IDEA what I'm doing though, no documentation that I can find by googling aside from some VMS install guide. Any idea how to reset it to it's factory settings? Didn't I just answer that one? Just hold the button while applying power. Johnny Did that - LED gets stuck on 4 until I release it, then goes to 2. Nothing printed on port 1. I think it might be dead. I'll take it then! -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments

11 years, 6 months

DECSERVER 300 software?

by b4＠gewt.net

On Tue, 7 May 2013, Johnny Billquist wrote: On 2013-05-07 19:17, Cory Smelosky wrote: On Tue, 7 May 2013, Johnny Billquist wrote: On 2013-05-07 18:58, Cory Smelosky wrote: On Tue, 7 May 2013, Johnny Billquist wrote: On 2013-05-07 18:48, Cory Smelosky wrote: On Tue, 7 May 2013, Johnny Billquist wrote: On 2013-05-07 18:35, Cory Smelosky wrote: On Tue, 7 May 2013, Sampsa Laine wrote: Anybody have this? My DS200/MC has just bit the dust it seems. Send the DS200 my way. I like fixing those. Every time I've had a problem with any of these, it has been the power supply. Got any hints on what breaks? In the case of mine the fans failed which resulted in rubber around inductors melting and having other components fail due to the heat. Seems like similar has happened to people around the internet. http://osx.dev.gimme-sympathy.org/users/b4/weblog/6b8a6/images/0e170.JPG#32… I actually have ones with no fans... Hopefully not with the original PSU? ;) No, it's original. I have at least three of them (without fans). However, I think the last one gave up last year. I'm now running with with fans... Interesting! I wonder how long mine ran without fans then. Note that they actually are original *without* fans. As in "there have never been any fans installed in the boxes". Made that way by DEC. Maybe DEC eventually started putting fans in because of issues with the PSU... :-) Ahhh! Perhaps! :) Johnny -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments

11 years, 6 months

DECSERVER 300 software?

by sampsa＠mac.com

On 7 May 2013, at 19:52, Johnny Billquist <bqt at softjar.se> wrote: Spinning display means it has booted and everything is up and running. Johnny Will try to connect to it via ethernet..

11 years, 6 months

DECSERVER 300 software?

by bqt＠softjar.se

On 2013-05-07 19:50, Sampsa Laine wrote: On 7 May 2013, at 19:46, Johnny Billquist <bqt at softjar.se> wrote: Two things comes to mind - the fact that the LED is working shows that the basic system is just fine. If something is broken, it would only be port 1 in this case. However, if you have a terminal connected to port 1, and the terminal have modem signalling enabled, it will not print anything. The DS does not activate the modem signals until it has booted. But there are data on the data lines before that... Johnny It's doing the spinning LED now. I'll check the terminal settings and reboot it. Spinning display means it has booted and everything is up and running. Johnny

11 years, 6 months

DECSERVER 300 software?

by sampsa＠mac.com

On 7 May 2013, at 19:46, Johnny Billquist <bqt at softjar.se> wrote: Two things comes to mind - the fact that the LED is working shows that the basic system is just fine. If something is broken, it would only be port 1 in this case. However, if you have a terminal connected to port 1, and the terminal have modem signalling enabled, it will not print anything. The DS does not activate the modem signals until it has booted. But there are data on the data lines before that... Johnny It's doing the spinning LED now. I'll check the terminal settings and reboot it. sampsa

11 years, 6 months

[DECtec] [HECnet] Fwd: [rescue] VAX 6000s and HSC controllers available in Winnipeg

by bqt＠softjar.se

On 2013-05-07 19:43, Mark Benson wrote: Just forwarding from the rescue list for those that aren't members: Begin forwarded message: From: <cbajus at mts.net> Subject: [rescue] VAX 6000s and HSC controllers available in Winnipeg Date: 7 May 2013 16:59:26 GMT+01:00 To: "rescue at sunhelp.org" <rescue at sunhelp.org> Reply-To: The Rescue List <rescue at sunhelp.org> Any hardcore DEC collectors out there? $work is finally getting rid of a few rows of classic DEC gear from our datacentre, which includes 3 VAX 6000s (310, 420, and 610) and a number of HSC controllers (40, 50, and two 95s). I'm absolutely _not_ offering to ship any of these items, but they're available for pickup in Winnipeg (Canada) if anyone is interested. Damn, a HSC95 would have been cool. But no way I'm shipping one. And I assume people are not willing to ship bits and pieces... It still takes some room and effort to get the good stuff out... Johnny -- DECtec mailing list http://dectec.info To unsubscribe from this list see page at: http://dectec.info/mailman/listinfo/dectec_dectec.info

11 years, 6 months

DECSERVER 300 software?

by bqt＠softjar.se

On 2013-05-07 19:41, Sampsa Laine wrote: On 7 May 2013, at 19:13, Johnny Billquist <bqt at softjar.se> wrote: On 2013-05-07 19:00, Sampsa Laine wrote: Yeah, I'll try to get it working, I have NO IDEA what I'm doing though, no documentation that I can find by googling aside from some VMS install guide. Any idea how to reset it to it's factory settings? Didn't I just answer that one? Just hold the button while applying power. Johnny Did that - LED gets stuck on 4 until I release it, then goes to 2. Nothing printed on port 1. I think it might be dead. Two things comes to mind - the fact that the LED is working shows that the basic system is just fine. If something is broken, it would only be port 1 in this case. However, if you have a terminal connected to port 1, and the terminal have modem signalling enabled, it will not print anything. The DS does not activate the modem signals until it has booted. But there are data on the data lines before that... Johnny

11 years, 6 months

Fwd: [rescue] VAX 6000s and HSC controllers available in Winnipeg

by md.benson＠gmail.com

Just forwarding from the rescue list for those that aren't members: Begin forwarded message: From: <cbajus at mts.net> Subject: [rescue] VAX 6000s and HSC controllers available in Winnipeg Date: 7 May 2013 16:59:26 GMT+01:00 To: "rescue at sunhelp.org" <rescue at sunhelp.org> Reply-To: The Rescue List <rescue at sunhelp.org> Any hardcore DEC collectors out there? $work is finally getting rid of a few rows of classic DEC gear from our datacentre, which includes 3 VAX 6000s (310, 420, and 610) and a number of HSC controllers (40, 50, and two 95s). I'm absolutely _not_ offering to ship any of these items, but they're available for pickup in Winnipeg (Canada) if anyone is interested. Thanks, Cory. _______________________________________________ rescue list - http://www.sunhelp.org/mailman/listinfo/rescue -- Mark Benson http://DECtec.info Twitter: @DECtecInfo HECnet: STAR69::MARK Online Resource & Mailing List for DEC Enthusiasts.

11 years, 6 months

DECSERVER 300 software?

by sampsa＠mac.com

On 7 May 2013, at 19:13, Johnny Billquist <bqt at softjar.se> wrote: On 2013-05-07 19:00, Sampsa Laine wrote: Yeah, I'll try to get it working, I have NO IDEA what I'm doing though, no documentation that I can find by googling aside from some VMS install guide. Any idea how to reset it to it's factory settings? Didn't I just answer that one? Just hold the button while applying power. Johnny Did that - LED gets stuck on 4 until I release it, then goes to 2. Nothing printed on port 1. I think it might be dead.

11 years, 6 months

← Newer
1
...
57
58
59
60
61
62
63
...
68
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet May 2013