On Sat, May 11, 2013 at 7:12 PM, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-11 19:07, Jordi Guillaumes i Pons wrote:
El 04/05/2013, a les 17:02, Johnny Billquist <bqt at softjar.se> va escriure:
All of these can be found on MIM::DU:[4,54] unless stated otherwise. Let
me know if you are interested in sources, as I usually have those as well,
but in various places.
Nice bunch of stuff you have :) I am trying to peek at it a little bit,
but it seems the permissions are not set up to allow "public" access:
dir mim::du:[4,54]dob.*
%DIRECT-E-OPENIN, error opening MIM::DU:[4,54]DOB.TSK;1 as input
-RMS-E-PRV, insufficient privilege or file protection violation
GUEST account doesn't work either:
dir mim"guest guest"::du:[4,54]dob.*
%DIRECT-E-OPENIN, error opening MIM"guest password"::DU:[4,54]DOB.TSK;1 as
input
-RMS-E-PRV, insufficient privilege or file protection violation
(I'm trying to access from a VAX/VMS system running RSX).
Oww. Crap. I tightened security many years ago when I found that some people
were trying to download the whole RSX distribution from MIM over kermit...
I'll fix that access to [4,54] right away.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Hello!
People are trying to do that? Locally or from far away? That's a heck
of a lot of things to download. And from what I've seen with this
discussion quite a mess.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
On 2013-05-11 19:07, Jordi Guillaumes i Pons wrote:
El 04/05/2013, a les 17:02, Johnny Billquist <bqt at softjar.se> va escriure:
All of these can be found on MIM::DU:[4,54] unless stated otherwise. Let me know if you are interested in sources, as I usually have those as well, but in various places.
Nice bunch of stuff you have :) I am trying to peek at it a little bit, but it seems the permissions are not set up to allow "public" access:
dir mim::du:[4,54]dob.*
%DIRECT-E-OPENIN, error opening MIM::DU:[4,54]DOB.TSK;1 as input
-RMS-E-PRV, insufficient privilege or file protection violation
GUEST account doesn't work either:
dir mim"guest guest"::du:[4,54]dob.*
%DIRECT-E-OPENIN, error opening MIM"guest password"::DU:[4,54]DOB.TSK;1 as input
-RMS-E-PRV, insufficient privilege or file protection violation
(I'm trying to access from a VAX/VMS system running RSX).
Oww. Crap. I tightened security many years ago when I found that some people were trying to download the whole RSX distribution from MIM over kermit...
I'll fix that access to [4,54] right away.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On Sat, 11 May 2013, Ian McLaughlin wrote:
Mulva?
That can work for the next system. ;)
(Seinfeld reference)
Ian
On 2013-05-11, at 10:27 AM, "Cory Smelosky" <b4 at gewt.net> wrote:
On Sat, 11 May 2013, Gregg Levine wrote:
On Sat, May 11, 2013 at 2:14 AM, Cory Smelosky <b4 at gewt.net> wrote:
Hey Johnny,
Could you swap MINDY and MANDY please?
Currently SET HOST MINDY goes to MANDY and SET HOST MANDY goes to MINDY and I keep forgetting to get the list updated. ;)
Thanks!
And how'd you pick those names? Is there a Mork involved in there?
;)
Surprisingly no, but I may use that for a system later.
The general scheme is "female names starting with M" which results in some rather amusing names being suggested. I have no idea how to pronounce some of the ones that have been suggested. ;)
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=18515434BA6011E2B…
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
Mulva?
(Seinfeld reference)
Ian
On 2013-05-11, at 10:27 AM, "Cory Smelosky" <b4 at gewt.net> wrote:
On Sat, 11 May 2013, Gregg Levine wrote:
On Sat, May 11, 2013 at 2:14 AM, Cory Smelosky <b4 at gewt.net> wrote:
Hey Johnny,
Could you swap MINDY and MANDY please?
Currently SET HOST MINDY goes to MANDY and SET HOST MANDY goes to MINDY and I keep forgetting to get the list updated. ;)
Thanks!
And how'd you pick those names? Is there a Mork involved in there?
;)
Surprisingly no, but I may use that for a system later.
The general scheme is "female names starting with M" which results in some rather amusing names being suggested. I have no idea how to pronounce some of the ones that have been suggested. ;)
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=18515434BA6011E2B…
On Sat, 11 May 2013, Gregg Levine wrote:
On Sat, May 11, 2013 at 2:14 AM, Cory Smelosky <b4 at gewt.net> wrote:
Hey Johnny,
Could you swap MINDY and MANDY please?
Currently SET HOST MINDY goes to MANDY and SET HOST MANDY goes to MINDY and I keep forgetting to get the list updated. ;)
Thanks!
And how'd you pick those names? Is there a Mork involved in there?
;)
Surprisingly no, but I may use that for a system later.
The general scheme is "female names starting with M" which results in some rather amusing names being suggested. I have no idea how to pronounce some of the ones that have been suggested. ;)
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
El 04/05/2013, a les 17:02, Johnny Billquist <bqt at softjar.se> va escriure:
All of these can be found on MIM::DU:[4,54] unless stated otherwise. Let me know if you are interested in sources, as I usually have those as well, but in various places.
Nice bunch of stuff you have :) I am trying to peek at it a little bit, but it seems the permissions are not set up to allow "public" access:
dir mim::du:[4,54]dob.*
%DIRECT-E-OPENIN, error opening MIM::DU:[4,54]DOB.TSK;1 as input
-RMS-E-PRV, insufficient privilege or file protection violation
GUEST account doesn't work either:
dir mim"guest guest"::du:[4,54]dob.*
%DIRECT-E-OPENIN, error opening MIM"guest password"::DU:[4,54]DOB.TSK;1 as input
-RMS-E-PRV, insufficient privilege or file protection violation
(I'm trying to access from a VAX/VMS system running RSX).
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
On Sat, May 11, 2013 at 2:14 AM, Cory Smelosky <b4 at gewt.net> wrote:
Hey Johnny,
Could you swap MINDY and MANDY please?
Currently SET HOST MINDY goes to MANDY and SET HOST MANDY goes to MINDY and I keep forgetting to get the list updated. ;)
Thanks!
And how'd you pick those names? Is there a Mork involved in there?
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
Hey Johnny,
Could you swap MINDY and MANDY please?
Currently SET HOST MINDY goes to MANDY and SET HOST MANDY goes to MINDY and I keep forgetting to get the list updated. ;)
Thanks!
On 10-May-13 13:25, Robert Jarratt wrote:
-----Original Message-----
From: Cory Smelosky [mailto:b4 at gewt.net]
Sent: 10 May 2013 07:28
To: Robert Jarratt
Cc: simh; hecnet
Subject: Re: [HECnet] TOPS20 4.1 DECnet Progress
On Wed, 8 May 2013, Robert Jarratt wrote:
Making progress:
$OPR
OPR>ENTER NCP
NCP>SHOW STATUS KNOWN LINES
NCP>
22:25:11 NCP request # 2 [SHOW STATUS KNOWN LINES]
Status as of 8-May-2013 22:25:12
Line ID State Adjacent Node
KDP_0_0 On
KDP_0_1 On
Function completed successfully
NCP>
J
Regards
Rob
I wonder if it would be possible to apply what you've done with TOPS-20 to
TOPS-10.
Once I get it working on TOPS-20 then we can try TOPS-10. My own efforts to
install DECnet on TOPS-10 have not gone well so far though, it fails to link
after MONGEN.
Regards
Rob
Assuming you follow the installation guide and that there's no version skew, any version of TOPS-10 that supports DECnet should build and run out of the box.
If you provide the specific version & tape images, commands used and all output, we can advise.
Do note that if you are using any unsupported/customer supported modules (e.g. the DMR driver), they need to be obtained from the 'customer supported' tape/directory and added to the build files.
This communication may not represent my employer's views,
if any, on the matters discussed.
_______________________________________________
Simh mailing list
Simh at trailing-edge.comhttp://mailman.trailing-edge.com/mailman/listinfo/simh
El 10/05/2013, a les 19:29, Cory Smelosky <b4 at gewt.net> va escriure:
Once I get it working on TOPS-20 then we can try TOPS-10. My own efforts to
install DECnet on TOPS-10 have not gone well so far though, it fails to link
after MONGEN.
That was the same problem I was having.
Same thing here.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
