On 23 Feb 2013, at 19:30, Peter Lothberg <roll at Stupi.SE> wrote:
On 02/23/2013 07:21 PM, Cory Smelosky wrote:
I've managed to coax my provider in to giving me another IP
(apparently 5 IPs come with my plan), so I can get a virtual cisco
up on my VPS (in Canada).
Brian, would you like to get this all joined in to the mesh? Is a NA
hub still needed or has someone else offered one? (This'd be on an
unmetered gigE pipe)
I think running a hub on an emulated router maybe isn't the best idea.
(sorry to say so)
We also have to take in to account how to get some kind of resonalble
routing, as the inside of an area is not exchanged with other areas.
-P
Very well. I'll dedicate the IP to running ancient Solaris or something then.;)
On 02/23/2013 07:21 PM, Cory Smelosky wrote:
I've managed to coax my provider in to giving me another IP
(apparently 5 IPs come with my plan), so I can get a virtual cisco
up on my VPS (in Canada).
Brian, would you like to get this all joined in to the mesh? Is a NA
hub still needed or has someone else offered one? (This'd be on an
unmetered gigE pipe)
I think running a hub on an emulated router maybe isn't the best idea.
(sorry to say so)
We also have to take in to account how to get some kind of resonalble
routing, as the inside of an area is not exchanged with other areas.
-P
On Sat, Feb 23, 2013 at 7:28 PM, Cory Smelosky <b4 at gewt.net> wrote:
On 23 Feb 2013, at 19:27, Dave McGuire <mcguire at neurotica.com> wrote:
On 02/23/2013 07:21 PM, Cory Smelosky wrote:
I've managed to coax my provider in to giving me another IP
(apparently 5 IPs come with my plan ), so I can get a virtual cisco
up on my VPS (in Canada).
Brian, would you like to get this all joined in to the mesh? Is a NA
hub still needed or has someone else offered one? (This'd be on an
unmetered gigE pipe)
I think running a hub on an emulated router maybe isn't the best idea.
(sorry to say so)
Are any of my ideas the "best"? ;)
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Hello!
Most of them. Dave is just trying to do my job. Especially since
there's a big annoyed Wookiee paying him to do that, with interest and
a requirement to pay him back.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
I would say they're usually around the "well, let's do it because we CAN".
BTW, we need to get started on the X.25 network soon. Followed by an ISDN-over-IP network. HECPTN, guys!
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 24 Feb 2013, at 02:28, Cory Smelosky <b4 at gewt.net> wrote:
On 23 Feb 2013, at 19:27, Dave McGuire <mcguire at neurotica.com> wrote:
On 02/23/2013 07:21 PM, Cory Smelosky wrote:
I've managed to coax my provider in to giving me another IP
(apparently 5 IPs come with my plan ), so I can get a virtual cisco
up on my VPS (in Canada).
Brian, would you like to get this all joined in to the mesh? Is a NA
hub still needed or has someone else offered one? (This'd be on an
unmetered gigE pipe)
I think running a hub on an emulated router maybe isn't the best idea.
(sorry to say so)
Are any of my ideas the "best"? ;)
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 23 Feb 2013, at 19:27, Dave McGuire <mcguire at neurotica.com> wrote:
On 02/23/2013 07:21 PM, Cory Smelosky wrote:
I've managed to coax my provider in to giving me another IP
(apparently 5 IPs come with my plan ), so I can get a virtual cisco
up on my VPS (in Canada).
Brian, would you like to get this all joined in to the mesh? Is a NA
hub still needed or has someone else offered one? (This'd be on an
unmetered gigE pipe)
I think running a hub on an emulated router maybe isn't the best idea.
(sorry to say so)
Are any of my ideas the "best"? ;)
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 02/23/2013 07:21 PM, Cory Smelosky wrote:
I've managed to coax my provider in to giving me another IP
(apparently 5 IPs come with my plan ), so I can get a virtual cisco
up on my VPS (in Canada).
Brian, would you like to get this all joined in to the mesh? Is a NA
hub still needed or has someone else offered one? (This'd be on an
unmetered gigE pipe)
I think running a hub on an emulated router maybe isn't the best idea.
(sorry to say so)
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Hello!
I've managed to coax my provider in to giving me another IP (apparently 5 IPs come with my plan ), so I can get a virtual cisco up on my VPS (in Canada).
Brian, would you like to get this all joined in to the mesh? Is a NA hub still needed or has someone else offered one? (This'd be on an unmetered gigE pipe)
Outbound: CHIMPY::smtp%"joe.q.public at example.com"
Inboubd: NODENAME::USERNAME at chimpymail.com
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 24 Feb 2013, at 01:41, Julian Wolfe <julian at twinax.org> wrote:
My DECmail-11 sends/receives mail just fine, how do I do this?
On Feb 23, 2013, at 5:10 PM, Sampsa Laine <sampsa at mac.com> wrote:
I guess if you can make it talk Mail-11 you can use one of the existing HECnet - Internet gateways like CHIMPY..
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 24 Feb 2013, at 01:08, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> wrote:
Hello,
Anyone has experience setting up that? I _did_ it partially something like 30 years ago, using Message Router (but no internet mail, just A1 and VMSMAIL). I'm trying to do it again (with not a lot of success... I can't even make it BEGIN to work). Anyone has tried (and succeeded) at this?
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
The tricky part is the ALLIN1 mail. SMTP <-> VMSMAIL is (relatively) easy. But ALLIN1 is a different beast.
I can send mail from ALLIN1 to the internetz using an address like SMTP%"adress at domain.com"@MRGATE at BITXOW but it is clearly a kludge... And the reply address (internet to ALLIN1) is even worse, something like "BITXOW::MRGATE::\"A1::JGUILLAUMES\""@bitxow.jguillaumes.dyndns.org... which anyway does not work (my postfix server chokes at that recipient...).
I'm pretty sure there has to be an easier/more elegant way to do it.
El 24/02/2013, a les 0:41, Julian Wolfe <julian at twinax.org> va escriure:
My DECmail-11 sends/receives mail just fine, how do I do this?
On Feb 23, 2013, at 5:10 PM, Sampsa Laine <sampsa at mac.com> wrote:
I guess if you can make it talk Mail-11 you can use one of the existing HECnet - Internet gateways like CHIMPY..
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 24 Feb 2013, at 01:08, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> wrote:
Hello,
Anyone has experience setting up that? I _did_ it partially something like 30 years ago, using Message Router (but no internet mail, just A1 and VMSMAIL). I'm trying to do it again (with not a lot of success... I can't even make it BEGIN to work). Anyone has tried (and succeeded) at this?
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
Any chance of a quick walkthrough on how to set up a client?
Ian
Sent from my iPhone
On 2013-02-23, at 3:36 PM, Sampsa Laine <sampsa at mac.com> wrote:
Back to NOTES:
Steve D has graciously installed and setup notes on LABVAX, but it's not quite up yet.
We're looking for volunteer admins / mods, ping me if you want in.
RULES
-----
I hate rules, basically, but here's what we got:
The basic rules are that there's a "Whatever" conference where you can literally talk about whatever, and then specific conference for specific subjects - I know how easily stuff gets OT, so try to move it to "Whatever" after like half a dozen messages or so :)
We should be up by tomorrow or so, UTC, I think..
PS: For those of you not wanting to install a NOTES client, HILANT (which LABVAX is part of) offers guest accounts and you can get access that way. Log in as ACCTREQ and I'll roll you an account ASAP.
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 24 Feb 2013, at 01:23, hvlems at zonnet.nl wrote:
Yeah, i got that *after* I hit the send button and reread that mail.
-----Original Message-----
From: Sampsa Laine <sampsa at mac.com>
Sender: owner-hecnet at Update.UU.SE
Date: Sun, 24 Feb 2013 01:09:23
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] NOTES system?
I was talking about Deathrow, not Eisner :)
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 24 Feb 2013, at 01:07, hvlems at zonnet.nl wrote:
My comment on Eisner was just for the functionality it offers, i.e. Notes. It was _not_ my intention to have them connected. I like the HECnet setup as it is!
-----Original Message-----
From: Sampsa Laine <sampsa at mac.com>
Sender: owner-hecnet at Update.UU.SE
Date: Sun, 24 Feb 2013 00:49:22
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] NOTES system?
Uh, I don't want those guys on HECnet to be honest.
They encourage "security research" and well, I like the open and safe-ish feeling we have right now.
Speaking as an ex-pentester here..
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 23 Feb 2013, at 23:40, Ian McLaughlin <ian at platinum.net> wrote:
I've always wondered why the Deathrow cluster isn't on HECnet.
Ian
Sent from my iPad
On 2013-02-23, at 1:37 PM, Sampsa Laine <sampsa at mac.com> wrote:
Eisner's not on HECnet.
But Steve D's setting it up on the HILANT cluster.
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 23 Feb 2013, at 23:34, hvlems at zonnet.nl wrote:
Eisner runs notes too.
------Origineel bericht------
Van: Fred
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] NOTES system?
Verzonden: 23 februari 2013 22:31
On Fri, 22 Feb 2013, Julian Wolfe wrote:
I seem to remember a system on HECnet with NOTES installed, and there
was some kind of conversation going on it.
Is that machine still going?
That was one of Zane H.'s systems if I recall correctly.
NOTES is running on MISER:: (and MISER runs 24/7). All I'd need to know
is what conferences folks want me to add.
Fred
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=36E63A187E0111E29…
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=E9FC76667E1111E29…
