Morning all,
Are the scripts not running? I updated DNS to reflect my IP change several days ago, didn't receive an email, and can't reach the rest of HECnet.
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
Daniel Soderstrom <snaggs at mac.com> writes:
The error is;
Please mount volume ESP_DATA in device _ESP1$DKA200:
Can't mount a device that doesn't exists!
The problem with copying is that atm, the machine is an island unto itself a=
nd I've nowhere to copy it to. I wanted to get IP up so I could ftp it out.
If I get that far, do you guys have a copy of 6.2 and RDB etc that I can ins=
tall from? i wanted dont want to weigh the Vaxstation down with the extra li=
nes of code in the current version. I've got a RX3200 for that. I even thoug=
ht of putting on 5.5
Look through the system startup for a MOUNT command that would attempt to
mount DKA200 with label ESP_DATA.
$ SEARCH SYS$STARTUP:*.COM ESP_DATA
When you find that, edit the procedure and comment out the MOUNT.
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
The error is;
Please mount volume ESP_DATA in device _ESP1$DKA200:
The problem with copying is that atm, the machine is an island unto itself and I've nowhere to copy it to. I wanted to get IP up so I could ftp it out.
If I get that far, do you guys have a copy of 6.2 and RDB etc that I can install from? i wanted dont want to weigh the Vaxstation down with the extra lines of code in the current version. I've got a RX3200 for that. I even thought of putting on 5.5
Regards,
Daniel.
Sent from my iPad
On 5 Oct 2013, at 8:11 pm, "Brian Schenkenberger, VAXman-" <system at TMESIS.COM> wrote:
Daniel Soderstrom <snaggs at mac.com> writes:
Thanks Brian,
Any safe way to have it stop moaning about the missing disk? Been reading th=
e doco on sysgen, just a bit scared of borking the system before I recover t=
he licence keys :)
Copy SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB and you'll have all your current
licenses.
I glanced over your other post. What error are you getting about a missing
disk?
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
Daniel Soderstrom <snaggs at mac.com> writes:
Thanks Brian,
Any safe way to have it stop moaning about the missing disk? Been reading th=
e doco on sysgen, just a bit scared of borking the system before I recover t=
he licence keys :)
Copy SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB and you'll have all your current
licenses.
I glanced over your other post. What error are you getting about a missing
disk?
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
Thanks Brian,
Any safe way to have it stop moaning about the missing disk? Been reading the doco on sysgen, just a bit scared of borking the system before I recover the licence keys :)
Regards,
Daniel,
Sent from my iPad
On 5 Oct 2013, at 7:42 pm, "Brian Schenkenberger, VAXman-" <system at TMESIS.COM> wrote:
"Brian Schenkenberger, VAXman-" <system at TMESIS.COM> writes:
Daniel Soderstrom <snaggs at mac.com> writes:
I've been going round in circles trying to get UCX up and running. I have th=
e AUI transceiver plugged into the back and it has a green light.
It's VMS 6.2. It has been configured at some point as it had some old gatewa=
y and BIND entries.
I run the config tool, and when I select 4 (interface) it says=20
"Warning - No Ethernet device found on system, ESP1"
and then aborts. When I show dev on console it shows a device EZA0: which a M=
AC address.
I've spent hours on this and are feeling discouraged!
HELP DEFINE COMMUNICATION_CONTROLLER ;)
I saw your follow-on. Ignore this. The EZ interface should be listed in
there by default. BTW, using LIST COMMUNICATION_CONTROLLER will show all
of the default configurable controller types.
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
"Brian Schenkenberger, VAXman-" <system at TMESIS.COM> writes:
Daniel Soderstrom <snaggs at mac.com> writes:
I've been going round in circles trying to get UCX up and running. I have th=
e AUI transceiver plugged into the back and it has a green light.
It's VMS 6.2. It has been configured at some point as it had some old gatewa=
y and BIND entries.
I run the config tool, and when I select 4 (interface) it says=20
"Warning - No Ethernet device found on system, ESP1"
and then aborts. When I show dev on console it shows a device EZA0: which a M=
AC address.
I've spent hours on this and are feeling discouraged!
HELP DEFINE COMMUNICATION_CONTROLLER ;)
I saw your follow-on. Ignore this. The EZ interface should be listed in
there by default. BTW, using LIST COMMUNICATION_CONTROLLER will show all
of the default configurable controller types.
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
Daniel Soderstrom <snaggs at mac.com> writes:
I've been going round in circles trying to get UCX up and running. I have th=
e AUI transceiver plugged into the back and it has a green light.
It's VMS 6.2. It has been configured at some point as it had some old gatewa=
y and BIND entries.
I run the config tool, and when I select 4 (interface) it says=20
"Warning - No Ethernet device found on system, ESP1"
and then aborts. When I show dev on console it shows a device EZA0: which a M=
AC address.
I've spent hours on this and are feeling discouraged!
HELP DEFINE COMMUNICATION_CONTROLLER ;)
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
Ok, I solved one problem. It was doing a minimal boot. However, when I do a normal boot it gets stuck waiting to mount dka200. I have a dka200 drive, but it's obviously not the one it was originally configured with.
Can anyone point me in the right direction as to how to reset the configuration? I don't have any install disks so my goal is to get a copy of the licence files and keep the installed programming languages. It would be nice to take a backup for prosperity, but not essential.
Daniel
Sent from my iPhone
I've been going round in circles trying to get UCX up and running. I have the AUI transceiver plugged into the back and it has a green light.
It's VMS 6.2. It has been configured at some point as it had some old gateway and BIND entries.
I run the config tool, and when I select 4 (interface) it says
"Warning - No Ethernet device found on system, ESP1"
and then aborts. When I show dev on console it shows a device EZA0: which a MAC address.
I've spent hours on this and are feeling discouraged!
Daniel
Sent from my iPhone
