On 24 Dec 2012, at 19:07, sampsa at mac.com wrote:
Whilst you're at it, add another one, SIIKVX, 47.1001
SIMH-VAX on Core 2 Duo.
What OS/version is it running/going to run?
Sampsa
On 25 Dec 2012, at 01:44, Johnny Billquist <bqt at softjar.se> wrote:
On 2012-12-24 00:37, sampsa at mac.com wrote:
Johnny,
When you get the chance, add this node for me. It's a WinNT4 Server running Pathworks that I play around with.
Done.
Johnny
Whilst you're at it, add another one, SIIKVX, 47.1001
SIMH-VAX on Core 2 Duo.
Sampsa
On 25 Dec 2012, at 01:44, Johnny Billquist <bqt at softjar.se> wrote:
On 2012-12-24 00:37, sampsa at mac.com wrote:
Johnny,
When you get the chance, add this node for me. It's a WinNT4 Server running Pathworks that I play around with.
Done.
Johnny
On 2012-12-24 00:37, sampsa at mac.com wrote:
Johnny,
When you get the chance, add this node for me. It's a WinNT4 Server running Pathworks that I play around with.
Done.
Johnny
On 2012-12-24 01:51, Steve Davidson wrote:
Johnny,
Please add node 19.140 name DWARF to DECnet. It is a SimH instance on a
Raspberry Pi. It will be running VMS (VAX-11/780).
Done.
Johnny
On 2012-12-24 06:22, Cory Smelosky wrote:
On 24 Dec 2012, at 00:16, Cory Smelosky <b4 at gewt.net> wrote:
Hey Johnny,
When you get the chance, add MAE (9.11) to the novelist!
Let's plan for the future so I won't need to bug you:
MOYA (9.12)
MOIRA (9.13)
as well.
Done.
Johnny
Can you put up the entire 4.7 kit somewhere? I can copy that instead of
foraging elsewhere... :-)
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Jordi
Guillaumes i Pons
Sent: Monday, December 24, 2012 03:12
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] New node in area 19
You have to install a small kit. It can be found in the
freeware CDs IIRC. For your convenience I have copied it to
BITXOO::DUA1:[KITS]
By the way, a 4.7 system works nicely as area router. Small
footprint and overhead ;)
Jordi Guillaumes i Pons
Barcelona - Catalunya - Europa
El 24/12/2012, a les 8:47, Cory Smelosky <b4 at gewt.net> va escriure:
Also, how did you license decnet? It asks me to license it
when I run
STARTNET.COM
El 24/12/2012, a les 13:32, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> va escriure:
I have had no problem doing TOPS-10 MONGENs following that.
http://pastebin.com/LDUWrSEA is what happens
This is a succesful MONGEN on KLH10:
Actually, there is a mistake in that MONGEN. The answer to " Load DECnet DTE service (YES,NO) :" must be NO.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
El 23/12/2012, a les 23:38, Cory Smelosky <b4 at gewt.net> va escriure:
I have had no problem doing TOPS-10 MONGENs following that.
http://pastebin.com/LDUWrSEA is what happens
This is a succesful MONGEN on KLH10:
.r setsrc
*cp [10,7,mon]
*^Z
.r mongen
Write MONGEN.MIC (YES,NO) :
% DSK:MONGEN.MIC will not be written
% File DSK:MONGEN.MIC already exists
MONGEN for 704 monitors
MONGEN will generate any known TOPS-10 configuration. For information
about which configurations are supported, please refer to the SPD.
/HELP (PROMPT,SHORT,LONG) ]:
Which GEN (SYS,F) : sys
Output(DSK:SYSCNF.MAC):
DECsystem10 (KL,KS) : kl
CPUs (1,1-6) : 1
System name : BITXT1
CPU0 serial number (1-10000) : 1022
Exclude monitor overhead from user run time (YES,NO) :
EBOX/MBOX runtime accounting (YES,NO) :
Exclude PI time from user runtime (YES,NO) :
Account verification (YES,NO) : no
MOS memory (YES,NO) :
Autoconfigured device options:
Include SCA (NO,YES,PROMPT):
Include Ethernet service (NO,YES,PROMPT): yes
Include SA10 device support (NO,YES,PROMPT):
Include RP01/2/3 disks (NO,YES,PROMPT):
Include Swapping drums (NO,YES,PROMPT):
Include RS04/5 Massbus disks (NO,YES,PROMPT):
Prompt for RP0x/RM0x Massbus disks (NO,YES): yes
Device code (CR,0-774) :
Massbus device (0,0-7) :
Drive, slave, or unit: all
Data:
Do you want to specify more data (NO,YES):
Include DX20/RP20 disks (NO,YES,PROMPT):
Include TM02/TM03 magtapes (NO,YES,PROMPT): yes
Include DX10/TX01/TX02 tapes (NO,YES,PROMPT):
Include DX20/TX02 tapes (NO,YES,PROMPT):
Include TM78/TU78/TU79 magtapes (NO,YES,PROMPT):
Include TM10B magtapes (NO,YES,PROMPT):
Include TC10C magtapes (NO,YES,PROMPT):
Include BA10/LP100 printers (NO,YES,PROMPT):
Include CFE/LP20 printers (NO,YES,PROMPT):
Include XY10 plotters (NO,YES,PROMPT):
Include CR10 card readers (NO,YES,PROMPT):
Include CFE/CD20 card readers (NO,YES,PROMPT):
Include CP10/CP10D card punches (NO,YES,PROMPT):
Include PC04 paper tape punches (NO,YES,PROMPT):
Include PC04 paper tape readers (NO,YES,PROMPT):
Types of DTE service to load:
Load ANF-10 DTE service (YES,NO) : no
Load IBMCOMM DTE service (YES,NO) : no
Load DECnet DTE service (YES,NO) : yes
Local terminal configuration:
Configure old terminal scanners (NO,YES) :
How many RSX-20F TTYs on CPU0 (0,0-128) :
OPR octal line number (CTY,0-3) : cty
Data set lines
Number of Jobs (1-511) : 511
Maximum pages of core for each job (0,0-16384) :
Total amount of system core in K (512-4096) : 4096
Number of real-time devices (0,0-77) :
Allow jobs to be locked in core (YES,NO) :
Guaranteed number of pages for unlocked jobs (0,0-16384) :
Number of pages reserved for locking jobs in Exec Virtual Memory (10,0-?) :
Number of high priority interrupt queues (0,0-15): 5
Meter (NO,YES) :
KASER (NO,YES) :
MPXSER (YES,NO) :
PSISER (YES,NO) :
IPCF (YES,NO) :
ENQ/DEQ (YES,NO) :
Disk sets (ALL) :
Configure non-autoconfigured hardware (NO,YES) :
Number of PTYs (20,1-505) :
Network software (YES,NO) : yes
Node name : BITX>T1
Number of remote TTYs (485,0-485) :
ANF-10 software (YES,NO) : no
DECnet software (YES,NO) :
Node name (BITX) : BITXT1
Area number of central site (1,1-63) : 7
Node number of central site (1,1-1023) : 80
Router type (ROUTING,NONROUTING) : NONR
Transmit password (DECNET20) :
Remote terminals (YES,NO) :
LAT software (YES,NO) :
Node name (BITX) : BITXT1
Number of circuits (20,1-100) :
Service groups :
Decimal "symbol,value"
Octal "symbol,value"
SIXBIT "symbol,value"
Type "device-mnemonic,PI-channel" for special devices
Type "device-mnemonic,PI-channel,no.-of-devices"
Type "device-mnemonic,PI-channel,highest-ac-to-save"
Type "ersatz-device,P,Pn,search-list-type"
Type "command-name,dispatch,flags,unique-bits,PRVTAB-name"
Terminal class :
Additional terminals for classes:
Class to extend :
System default terminal type (TTY) : VT102
File DSK:SYSCNF.MAC Closed
Which GEN (SYS,F) : f
Output(DSK:F.MAC):
Feature set (KL10,KS10) : KL10
Standard settings (YES,NO) :
File DSK:F.MAC Closed
Which GEN (SYS,F) : ^Z
EXIT
.dir *.mic
MONGEN MIC 7 <057> 24-Dec-12 DSKB: [10,7,MON]
LINKM MIC 1 <057> 31-May-12 DSKC:
COMPIL MIC 1 <057> 31-May-12
Total of 2 blocks in 2 files on DSKC: [10,7,MON]
Grand total of 9 blocks in 3 files
.type compil.mic
00100 .COMPILE/COMPILE F,S
00200 .COMPILE/COMPILE DEVPRM,DTEPRM,NETPRM,D36PAR
00300 .COMPILE/COMPILE SYSCNF+<COMMON,COMDEV,COMMOD>
00400
00500 .R LINK
00600 *NEWSYS/SAVE/NOINITIAL/HASH:13K = /LOCALS -
00700 *COMMON,COMDEV,COMMOD,TOPS10/SEARCH-
00800 */PATCH:200/COUNTERS/GO
00900
. at compil
.COMPILE/COMPILE F,S
MACRO: F
MACRO: S
EXIT
.COMPILE/COMPILE DEVPRM,DTEPRM,NETPRM,D36PAR
MACRO: DEVPRM
MACRO: DTEPRM
MACRO: NETPRM
MACRO: D36PAR
EXIT
.COMPILE/COMPILE SYSCNF+<COMMON,COMDEV,COMMOD>
MACRO: COMMON
MACRO: COMDEV
MACRO: COMMOD
EXIT
.
.R LINK
*NEWSYS/SAVE/NOINITIAL/HASH:13K = /LOCALS -
#COMMON,COMDEV,COMMOD,TOPS10/SEARCH-
#/PATCH:200/COUNTERS/GO
[LNKRLC Reloc. ctr. initial value current value limit value
.LOW. 0 155054 330000
.HIGH. 340000 650677 734000
.CSUB. 330000 333466 340000
.INIT. 740000 766606 771000
.TWIC. 771000 772714 1000000
.XHGH. 2630000 2703030 2734000
.SYMS. 2000000 2000000 2630000
Absolute code loaded]
EXIT
.^Z
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
You have to install a small kit. It can be found in the freeware CDs IIRC. For your convenience I have copied it to BITXOO::DUA1:[KITS]
By the way, a 4.7 system works nicely as area router. Small footprint and overhead ;)
Jordi Guillaumes i Pons
Barcelona - Catalunya - Europa
El 24/12/2012, a les 8:47, Cory Smelosky <b4 at gewt.net> va escriure:
Also, how did you license decnet? It asks me to license it when I run STARTNET.COM
