So let's say I manage to get this second controller going, is there something like RCU to initialise the arrays from inside VMS whilst keeping the box running?
I understand there's a SWXCR utility or something for this?
Sampsa
Still didn't get it, prob some stupid mail filter somewhere - got a website to upload it to?
On 5 Sep 2011, at 19:40, hvlems at zonnet.nl wrote:
Ok, I'll resend it
Verzonden vanaf mijn draadloze BlackBerry -toestel
-----Original Message-----
From: Sampsa Laine <sampsa at mac.com>
Sender: owner-hecnet at Update.UU.SE
Date: Mon, 05 Sep 2011 19:26:10
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller?
By the way, the majordomo does not seem to like large attachments so if you want to send back a picture file send in directly to sampsa at mac.com.
Sampsa
On 5 Sep 2011, at 17:47, Sampsa Laine wrote:
Here's a photo of mine, can you draw the bit I need to change onto it, or the general area:
http://sampsa.com/wp-content/kzstyleboard.jpg
On 5 Sep 2011, at 17:28, Sampsa Laine wrote:
Any photos? I'm confused by the instructions.
On 5 Sep 2011, at 17:16, hvlems at zonnet.nl wrote:
Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other.
Verzonden vanaf mijn draadloze BlackBerry -toestel
-----Original Message-----
From: Sampsa Laine <sampsa at mac.com>
Sender: owner-hecnet at Update.UU.SE
Date: Mon, 05 Sep 2011 16:42:39
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller?
Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives.
Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it.
Sampsa
On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote:
The KZPAC is DEC's codename for the Mylex 960 RAID controller, right?
------Origineel bericht------
Van: Sampsa Laine
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] And yet more begging: KZPAC style controller?
Verzonden: 5 september 2011 10:33
I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365.
I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a
donation...
Sampsa
Verzonden vanaf mijn draadloze BlackBerry -toestel
On Mon, September 5, 2011 10:44 am, Sampsa Laine wrote:
I think Phil Mendelsohn made a bunch and is waiting to mail them as soon
as I send him the dough :)
Um, here's the part where I'm afraid we got wires crossed. I made you MMJ
to MMJ, as we confirmed. Now I'm hoping that's right.
The other thing you'll need to e-mail me is your snail-mail address, or
I'll have to send them General Delivery. Or maybe I'll mail them to Santa
and he'll find you. ;)
Phil - what are the options,usually the middle one is the reasonable one.
Already sent via private e-mail; unfortunately, I'm migrating e-mail
servers, and outgoing has been sent from gmail / other various servers not
subscribed to this list.
Cheers,
Phil
--
"Nothing is too small to know, and nothing to big to attempt."
--Sir William Cornelius Van Horne
Ok, I'll resend it
Verzonden vanaf mijn draadloze BlackBerry -toestel
-----Original Message-----
From: Sampsa Laine <sampsa at mac.com>
Sender: owner-hecnet at Update.UU.SE
Date: Mon, 05 Sep 2011 19:26:10
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller?
By the way, the majordomo does not seem to like large attachments so if you want to send back a picture file send in directly to sampsa at mac.com.
Sampsa
On 5 Sep 2011, at 17:47, Sampsa Laine wrote:
Here's a photo of mine, can you draw the bit I need to change onto it, or the general area:
http://sampsa.com/wp-content/kzstyleboard.jpg
On 5 Sep 2011, at 17:28, Sampsa Laine wrote:
Any photos? I'm confused by the instructions.
On 5 Sep 2011, at 17:16, hvlems at zonnet.nl wrote:
Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other.
Verzonden vanaf mijn draadloze BlackBerry -toestel
-----Original Message-----
From: Sampsa Laine <sampsa at mac.com>
Sender: owner-hecnet at Update.UU.SE
Date: Mon, 05 Sep 2011 16:42:39
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller?
Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives.
Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it.
Sampsa
On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote:
The KZPAC is DEC's codename for the Mylex 960 RAID controller, right?
------Origineel bericht------
Van: Sampsa Laine
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] And yet more begging: KZPAC style controller?
Verzonden: 5 september 2011 10:33
I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365.
I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a
donation...
Sampsa
Verzonden vanaf mijn draadloze BlackBerry -toestel
By the way, the majordomo does not seem to like large attachments so if you want to send back a picture file send in directly to sampsa at mac.com.
Sampsa
On 5 Sep 2011, at 17:47, Sampsa Laine wrote:
Here's a photo of mine, can you draw the bit I need to change onto it, or the general area:
http://sampsa.com/wp-content/kzstyleboard.jpg
On 5 Sep 2011, at 17:28, Sampsa Laine wrote:
Any photos? I'm confused by the instructions.
On 5 Sep 2011, at 17:16, hvlems at zonnet.nl wrote:
Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other.
Verzonden vanaf mijn draadloze BlackBerry -toestel
-----Original Message-----
From: Sampsa Laine <sampsa at mac.com>
Sender: owner-hecnet at Update.UU.SE
Date: Mon, 05 Sep 2011 16:42:39
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller?
Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives.
Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it.
Sampsa
On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote:
The KZPAC is DEC's codename for the Mylex 960 RAID controller, right?
------Origineel bericht------
Van: Sampsa Laine
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] And yet more begging: KZPAC style controller?
Verzonden: 5 september 2011 10:33
I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365.
I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a
donation...
Sampsa
Verzonden vanaf mijn draadloze BlackBerry -toestel
Here's a photo of mine, can you draw the bit I need to change onto it, or the general area:
http://sampsa.com/wp-content/kzstyleboard.jpg
On 5 Sep 2011, at 17:28, Sampsa Laine wrote:
Any photos? I'm confused by the instructions.
On 5 Sep 2011, at 17:16, hvlems at zonnet.nl wrote:
Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other.
Verzonden vanaf mijn draadloze BlackBerry -toestel
-----Original Message-----
From: Sampsa Laine <sampsa at mac.com>
Sender: owner-hecnet at Update.UU.SE
Date: Mon, 05 Sep 2011 16:42:39
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller?
Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives.
Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it.
Sampsa
On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote:
The KZPAC is DEC's codename for the Mylex 960 RAID controller, right?
------Origineel bericht------
Van: Sampsa Laine
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] And yet more begging: KZPAC style controller?
Verzonden: 5 september 2011 10:33
I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365.
I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a
donation...
Sampsa
Verzonden vanaf mijn draadloze BlackBerry -toestel
Any photos? I'm confused by the instructions.
On 5 Sep 2011, at 17:16, hvlems at zonnet.nl wrote:
Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other.
Verzonden vanaf mijn draadloze BlackBerry -toestel
-----Original Message-----
From: Sampsa Laine <sampsa at mac.com>
Sender: owner-hecnet at Update.UU.SE
Date: Mon, 05 Sep 2011 16:42:39
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller?
Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives.
Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it.
Sampsa
On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote:
The KZPAC is DEC's codename for the Mylex 960 RAID controller, right?
------Origineel bericht------
Van: Sampsa Laine
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] And yet more begging: KZPAC style controller?
Verzonden: 5 september 2011 10:33
I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365.
I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a
donation...
Sampsa
Verzonden vanaf mijn draadloze BlackBerry -toestel
Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other.
Verzonden vanaf mijn draadloze BlackBerry -toestel
-----Original Message-----
From: Sampsa Laine <sampsa at mac.com>
Sender: owner-hecnet at Update.UU.SE
Date: Mon, 05 Sep 2011 16:42:39
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller?
Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives.
Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it.
Sampsa
On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote:
The KZPAC is DEC's codename for the Mylex 960 RAID controller, right?
------Origineel bericht------
Van: Sampsa Laine
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] And yet more begging: KZPAC style controller?
Verzonden: 5 september 2011 10:33
I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365.
I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a
donation...
Sampsa
Verzonden vanaf mijn draadloze BlackBerry -toestel
I think Phil Mendelsohn made a bunch and is waiting to mail them as soon as I send him the dough :)
Phil - what are the options,usually the middle one is the reasonable one.
Sampsa
On 5 Sep 2011, at 16:04, Chrissie Caulfield wrote:
Sorry for the delay - yes I have an MMJ to DB9-F cable. Let me know your address and I'll post it to you.
Chrissie
On 31/08/11 09:38, Sampsa Laine wrote:
Those would be very welcome as well, esp the ones that are wired to a DB9-F on the other end.
Sampsa
On 31 Aug 2011, at 09:31, Chrissie Caulfield wrote:
On 30/08/11 18:39, Sampsa Laine wrote:
Or other sane mechanism for getting a graphical console up on an AS800?
I want to add some controllers and drives to CHIMPY?
I might have some home-made (ie very dodgy) ones lying around a cupboard
--
Chrissie
