Mark,
The tunnel won't come up between this end and yours. I have other
tunnels up and running so the problem is most likely at your end. I
will try to come in via atom...
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Johnny Billquist
Sent: Friday, March 11, 2011 08:15
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Network status
On 03/11/11 13:57, Mark Wickens wrote:
Are there any issues?
The area list on hecnet.eu is very 'limited', i.e, just me, and I
can't DIR MIM::
This is a list of areas visible to BUBBLE. It is updated hourly when
BUBBLE is online.
Known Area Volatile Summary as of 11-MAR-2011 12:19:26 Area State
Circuit Next node to area
4 reachable ISA-0 0 (BUBBLE)
Problem is not at my end.
.ncp sho act are
Active areas summary as of 11-MAR-11 14:14:05
Next
Area State Circuit Node
1 Reachable 1.13 (MIM)
11 Reachable UNA-0 11.2 (MAISA)
19 Reachable UNA-0 19.41 (SG1)
20 Reachable UNA-0 20.1 (WOPR)
33 Reachable UNA-0 19.41 (SG1)
Johnny
On 03/11/11 13:57, Mark Wickens wrote:
Are there any issues?
The area list on hecnet.eu is very 'limited', i.e, just me, and I can't
DIR MIM::
This is a list of areas visible to BUBBLE. It is updated hourly when
BUBBLE is online.
Known Area Volatile Summary as of 11-MAR-2011 12:19:26
Area State Circuit Next node to area
4 reachable ISA-0 0 (BUBBLE)
Problem is not at my end.
.ncp sho act are
Active areas summary as of 11-MAR-11 14:14:05
Next
Area State Circuit Node
1 Reachable 1.13 (MIM)
11 Reachable UNA-0 11.2 (MAISA)
19 Reachable UNA-0 19.41 (SG1)
20 Reachable UNA-0 20.1 (WOPR)
33 Reachable UNA-0 19.41 (SG1)
Johnny
MIM:: is available to me in the US. I'll take a look at BUBBLE via the
tunnel.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of hvlems at zonnet.nl
Sent: Friday, March 11, 2011 08:11
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Network status
BTW I'll send you an updated nodelist for the website.
Hans
------Origineel bericht------
Van:Mark Wickens
Afzender:owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden:hecnet at Update.UU.SE
Onderwerp: [HECnet] Network status
Verzonden: 11 maart 2011 13:57
Are there any issues?
The area list on hecnet.eu is very 'limited', i.e, just me, and I can't
DIR MIM::
This is a list of areas visible to BUBBLE. It is updated hourly when
BUBBLE is online.
Known Area Volatile Summary as of 11-MAR-2011 12:19:26
Area State Circuit Next node to area
4 reachable ISA-0 0 (BUBBLE)
Regards, Mark.
Verzonden vanaf mijn draadloze BlackBerry(r)-toestel
BTW I'll send you an updated nodelist for the website.
Hans
------Origineel bericht------
Van:Mark Wickens
Afzender:owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden:hecnet at Update.UU.SE
Onderwerp: [HECnet] Network status
Verzonden: 11 maart 2011 13:57
Are there any issues?
The area list on hecnet.eu is very 'limited', i.e, just me, and I can't
DIR MIM::
This is a list of areas visible to BUBBLE. It is updated hourly when
BUBBLE is online.
Known Area Volatile Summary as of 11-MAR-2011 12:19:26
Area State Circuit Next node to area
4 reachable ISA-0 0 (BUBBLE)
Regards, Mark.
Verzonden vanaf mijn draadloze BlackBerry -toestel
My systems are in area 44. The bridge program is only started when one of the area routers is running. I'm not at home so all systems are down.
Hans
------Origineel bericht------
Van:Mark Wickens
Afzender:owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden:hecnet at Update.UU.SE
Onderwerp: [HECnet] Network status
Verzonden: 11 maart 2011 13:57
Are there any issues?
The area list on hecnet.eu is very 'limited', i.e, just me, and I can't
DIR MIM::
This is a list of areas visible to BUBBLE. It is updated hourly when
BUBBLE is online.
Known Area Volatile Summary as of 11-MAR-2011 12:19:26
Area State Circuit Next node to area
4 reachable ISA-0 0 (BUBBLE)
Regards, Mark.
Verzonden vanaf mijn draadloze BlackBerry -toestel
Are there any issues?
The area list on hecnet.eu is very 'limited', i.e, just me, and I can't DIR MIM::
This is a list of areas visible to BUBBLE. It is updated hourly when BUBBLE is online.
Known Area Volatile Summary as of 11-MAR-2011 12:19:26
Area State Circuit Next node to area
4 reachable ISA-0 0 (BUBBLE)
Regards, Mark.
Actually they have a 2m too. Buying that instead (1m is too short).
Sampsa
On 10 Mar 2011, at 19:49, Sampsa Laine wrote:
These guys sell a 5m one..
http://www.cable-trader.co.uk/items/scsi-v-vhdci-male-to-hd68-male-5_0m
I guess if the shielding is ok it'll work. If not I'll send it back, company's UK based so Trade of Goods Act applies :)
Sampsa
On 10 Mar 2011, at 19:48, Mark Wickens wrote:
On 10/03/11 19:24, Sampsa Laine wrote:
I meant to say:
If I get a HD68 - VHDCI cable do you guys think I'll be able to plug in my BA365s into one of the INTERNAL HD68 sockets?
Sampsa
On 10 Mar 2011, at 19:15, Mark Wickens wrote:
On 10/03/11 16:50, Sampsa Laine wrote:
I accidentally broke the external port on my KZPAC controller I was taking out of a 4100 Alphaserver - does anybody have a spare one of these?
I've seen a few on ebay for about 70 USD but the shipping to the UK they want is crazy.
Sampsa
No sorry - I'd ordered a card off ebay from a seller who then sent the wrong one (a high voltage diff card - totally useless). I sent it back and he said 'we've got a shipment coming in we may have one in there' and what I *should* have done then is not be trusting and start a dispute to cover all bases. He then ran out the 30 days I had to complain and won't now communicate.
It was only GBP 12.00 but that's not the point. He's techbay2000 so buyer beware. He's 'techbay2010'.
Mark.
AFAIK internal/external is the same - I'd keep the cable as short as you can however...
These guys sell a 5m one..
http://www.cable-trader.co.uk/items/scsi-v-vhdci-male-to-hd68-male-5_0m
I guess if the shielding is ok it'll work. If not I'll send it back, company's UK based so Trade of Goods Act applies :)
Sampsa
On 10 Mar 2011, at 19:48, Mark Wickens wrote:
On 10/03/11 19:24, Sampsa Laine wrote:
I meant to say:
If I get a HD68 - VHDCI cable do you guys think I'll be able to plug in my BA365s into one of the INTERNAL HD68 sockets?
Sampsa
On 10 Mar 2011, at 19:15, Mark Wickens wrote:
On 10/03/11 16:50, Sampsa Laine wrote:
I accidentally broke the external port on my KZPAC controller I was taking out of a 4100 Alphaserver - does anybody have a spare one of these?
I've seen a few on ebay for about 70 USD but the shipping to the UK they want is crazy.
Sampsa
No sorry - I'd ordered a card off ebay from a seller who then sent the wrong one (a high voltage diff card - totally useless). I sent it back and he said 'we've got a shipment coming in we may have one in there' and what I *should* have done then is not be trusting and start a dispute to cover all bases. He then ran out the 30 days I had to complain and won't now communicate.
It was only GBP 12.00 but that's not the point. He's techbay2000 so buyer beware. He's 'techbay2010'.
Mark.
AFAIK internal/external is the same - I'd keep the cable as short as you can however...
On 10/03/11 19:24, Sampsa Laine wrote:
I meant to say:
If I get a HD68 - VHDCI cable do you guys think I'll be able to plug in my BA365s into one of the INTERNAL HD68 sockets?
Sampsa
On 10 Mar 2011, at 19:15, Mark Wickens wrote:
On 10/03/11 16:50, Sampsa Laine wrote:
I accidentally broke the external port on my KZPAC controller I was taking out of a 4100 Alphaserver - does anybody have a spare one of these?
I've seen a few on ebay for about 70 USD but the shipping to the UK they want is crazy.
Sampsa
No sorry - I'd ordered a card off ebay from a seller who then sent the wrong one (a high voltage diff card - totally useless). I sent it back and he said 'we've got a shipment coming in we may have one in there' and what I *should* have done then is not be trusting and start a dispute to cover all bases. He then ran out the 30 days I had to complain and won't now communicate.
It was only GBP 12.00 but that's not the point. He's techbay2000 so buyer beware. He's 'techbay2010'.
Mark.
AFAIK internal/external is the same - I'd keep the cable as short as you can however...
I meant to say:
If I get a HD68 - VHDCI cable do you guys think I'll be able to plug in my BA365s into one of the INTERNAL HD68 sockets?
Sampsa
On 10 Mar 2011, at 19:15, Mark Wickens wrote:
On 10/03/11 16:50, Sampsa Laine wrote:
I accidentally broke the external port on my KZPAC controller I was taking out of a 4100 Alphaserver - does anybody have a spare one of these?
I've seen a few on ebay for about 70 USD but the shipping to the UK they want is crazy.
Sampsa
No sorry - I'd ordered a card off ebay from a seller who then sent the wrong one (a high voltage diff card - totally useless). I sent it back and he said 'we've got a shipment coming in we may have one in there' and what I *should* have done then is not be trusting and start a dispute to cover all bases. He then ran out the 30 days I had to complain and won't now communicate.
It was only GBP 12.00 but that's not the point. He's techbay2000 so buyer beware. He's 'techbay2010'.
Mark.
