On 2011-11-12 21.49, Rob Jarratt wrote:
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Oleg Safiullin
Sent: 12 November 2011 18:32
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Nodename database
What is the IP address of MIM? Is there a list of IP addresses of
HECnet nodes somewhere?
Regards
Rob
I know the following addresses:
MIM mim.update.uu.se
CTAKAH rsx.pdp-11.nsk.ru
CTEPBA rsx.pdp-11.nsk.ru:2023 (currently down)
Thanks. Telnet is indeed much better. But it is a little ironic that it is
better to use Telnet than DECnet to access a node on HECnet. :-)
Part of the reason is that when you use telnet, you are actully going through E11, which simulates a normal DH11 serial port towards the PDP-11. So you seem (to the PDP-11) to be sitting on a proper serial port.
Johnny
On 2011-11-12 19.54, hvlems at zonnet.nl wrote:
Johnny, the bridge program runs but the link doesn't seem to work.
Any ideas why?
Hans
Nope. Could you try kicking your bridge? Also, what address do you have?
Johnny
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Oleg Safiullin
Sent: 12 November 2011 18:32
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Nodename database
What is the IP address of MIM? Is there a list of IP addresses of
HECnet nodes somewhere?
Regards
Rob
I know the following addresses:
MIM mim.update.uu.se
CTAKAH rsx.pdp-11.nsk.ru
CTEPBA rsx.pdp-11.nsk.ru:2023 (currently down)
Thanks. Telnet is indeed much better. But it is a little ironic that it is
better to use Telnet than DECnet to access a node on HECnet. :-)
Regards
Rob
What is the IP address of MIM? Is there a list of IP addresses of HECnet
nodes somewhere?
Regards
Rob
I know the following addresses:
MIM mim.update.uu.se
CTAKAH rsx.pdp-11.nsk.ru
CTEPBA rsx.pdp-11.nsk.ru:2023 (currently down)
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Johnny Billquist
Sent: 12 November 2011 16:13
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Nodename database
On 2011-11-12 17.07, Oleg Safiullin wrote:
Weird. I tried setting host from MIM to MIM, loggin in as guest. No
errors.
No idea what the problem could be...?
Something related to connection speed and multiprocessing? :)
Anything is possible... But I would like to figure out how to reproduce it
so that
I can check things out. :-)
btw, i tried to connect from MIM to CTAKAH and found no errors.
I'll try to do more tests...
Same as MIM->MIM.
CTERM is not a good protocol, though, and I would generally recommend
against people using it to connect to MIM, if they have any other choice.
(telnet is way better)
Johnny
What is the IP address of MIM? Is there a list of IP addresses of HECnet
nodes somewhere?
Regards
Rob
On 2011-11-12 17:23, Oleg Safiullin wrote:
Johnny Billquist wrote:
On 2011-11-12 17.14, Oleg Safiullin wrote:
Johnny Billquist wrote:
On 2011-11-12 17.07, Oleg Safiullin wrote:
Weird. I tried setting host from MIM to MIM, loggin in as guest. No
errors.
No idea what the problem could be...?
Something related to connection speed and multiprocessing? :)
Anything is possible... But I would like to figure out how to
reproduce it so that I can check things out. :-)
Trying to do more tests... :)
--
btw, there's a DEVR1 task active and marked for abort :)
Yeah. That was me. I don't know why that task don't run down. I was
looking at RT0:, and I suspect the RT driver got lost somewhere. :-(
Johnny
Hmm...
No more problems...
btw,
...
Welcome to *Magica*.
:)
Darn. I should update all those. :-)
I'll reboot MIM shortly to get some issues unstuck, I think.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Johnny Billquist wrote:
On 2011-11-12 17.14, Oleg Safiullin wrote:
Johnny Billquist wrote:
On 2011-11-12 17.07, Oleg Safiullin wrote:
Weird. I tried setting host from MIM to MIM, loggin in as guest. No
errors.
No idea what the problem could be...?
Something related to connection speed and multiprocessing? :)
Anything is possible... But I would like to figure out how to
reproduce it so that I can check things out. :-)
Trying to do more tests... :)
--
btw, there's a DEVR1 task active and marked for abort :)
Yeah. That was me. I don't know why that task don't run down. I was looking at RT0:, and I suspect the RT driver got lost somewhere. :-(
Johnny
Hmm...
No more problems...
btw,
...
Welcome to *Magica*.
:)
On 2011-11-12 17.14, Oleg Safiullin wrote:
Johnny Billquist wrote:
On 2011-11-12 17.07, Oleg Safiullin wrote:
Weird. I tried setting host from MIM to MIM, loggin in as guest. No
errors.
No idea what the problem could be...?
Something related to connection speed and multiprocessing? :)
Anything is possible... But I would like to figure out how to
reproduce it so that I can check things out. :-)
Trying to do more tests... :)
--
btw, there's a DEVR1 task active and marked for abort :)
Yeah. That was me. I don't know why that task don't run down. I was looking at RT0:, and I suspect the RT driver got lost somewhere. :-(
Johnny
Johnny Billquist wrote:
On 2011-11-12 17.07, Oleg Safiullin wrote:
Weird. I tried setting host from MIM to MIM, loggin in as guest. No
errors.
No idea what the problem could be...?
Something related to connection speed and multiprocessing? :)
Anything is possible... But I would like to figure out how to reproduce it so that I can check things out. :-)
Trying to do more tests... :)
--
btw, there's a DEVR1 task active and marked for abort :)
