On 2014-09-16 06:56, Cory Smelosky wrote: On Mon, 15 Sep 2014, Mark Pizzolato - Info Comm wrote: On Monday, September 15, 2014 8:18 PM, Cory Smelosky wrote: Evening, I've been trying to netboot ULTRIX today and I have gotten nowhere. Works fine in SIMH! The kernel output says my DELQA is in DEQNA-LOCK mode despite any changes made to the switches...is this Ultrix behaviour or do I have 2 bum DELQAs? I wouldn't be too concerned about this detail, but if you want to worry about it, see if you can get a different output when running under SIMH. Alright. FYI: This is Ultrix 4.0. It appears to stop at printing what the time has been set to. I don't recall what the sequence of output produced at boot time is (maybe you capture that and tell us), but one thing to look at would be proper sequencing of the Qbus bus grants. What type of chassis/backplane are you using and what devices are plugged into the bus and what slots are they in?? BA123. 5 4 3 2 1 N D R R P 5 4 3 2 1 E D R R P N = NIC, D = DHV11, R = RAM, P = Processor, E = Emprt. All slots after are empty Hum. Hard to say for sure, but this might be a classical case of you having the NIC in the wrong place. Move it over to the "E" side... Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol