On 2014-05-05 03:17, Cory Smelosky wrote:
On Sun, 4 May 2014, Johnny Billquist wrote:
On 2014-05-04 20:53, Johnny Billquist wrote:
On 2014-05-04 11:36, Cory Smelosky wrote:
Hello all,
Circuit = DUP-0
      State = Cleared
Can anyone point me towards documentation on configuring a KDP/DUP on
RSX? I want to see the issues getting the KS10 simulator connected to
RSX for myself.
NCP>SET CIRCUIT DUP-0 STATE ON
NCP -- Set failed, component in wrong state, Line
NCP>SET LINE DUP-0 STATE ON
NCP -- Set failed, parameter not applicable, State
NCP>SET LINE KDP-0-0 STATE ON
NCP -- Set failed, parameter not applicable, State
It seems NCP on RSX is a bit different than on others. ;)
What does SHOW LINE DUP-0 CHAR and SHOW CIR DUP-0 CHAR show?
Oh, yeah. SHOW EXEC CHAR would also be helpful.
      Johnny
NCP>SHOW EXEC CHAR
Node characteristics as of 4-MAY-14 21:14:43
Executor node = 9.4 (MANDY)
      Identification = MOIRA, Management version = 4.2.0
      Host = 9.4 (MANDY), Loop count = 1
      Loop length = 40, Loop with = Mixed
      Incoming timer = 15, Outgoing timer = 30
      NSP version = 4.0.0
      Maximum links = 10, Delay factor = 32
      Delay weight = 2
      Inactivity timer = 30, Retransmit factor = 5
      Routing version = 2.0.0, Type = Endnode IV
      Maximum circuits = 4
      Incoming proxy = Disabled
      Outgoing proxy = Disabled
      Segment buffer size = 576
NCP>SHOW LINE DUP-0 CHAR
21:15:02   SYSLOG -- 70. *ERROR* On scan file open
21:15:19   SYSLOG -- 4. FCS I/O error code = 347
file: DU0:[???,???]SYSSCAN.TMP;1
Line characteristics as of 4-MAY-14 21:15:19
Line = DUP-0
      No information
NCP>SHOW CIRCUIT DUP-0 CHAR
Circuit characteristics as of 4-MAY-14 21:15:41
Circuit = DUP-0
      Type = DDCMP Point
NCP>SHOW KNOWN LINES
Known lines summary as of 4-MAY-14 21:15:57
Line                         State
UNA-0                       On
DUP-0                       Cleared
KDP-0-0                   Cleared
DMC-0                       Cleared
Thanks.
First of all:
PIP LB:[1,6]SYSSCAN.TMP;/RM
:-)
Second. You have an endnode config, but I thought that would only prevent several circuits
to be active at the same time. But anyway, you might want to do a new config as a routing
node instead.
I'm a bit surprised that there would be no information about the DUP-0 line. But since
I have not worked with DUP lines myself, I can't say for sure if that is expected.
I'll try and find some more information.
	Johnny
-- 
Johnny Billquist                                   || "I'm on a bus
                                                                  ||   on a psychedelic
trip
email: bqt at softjar.se                         ||   Reading murder books
pdp is alive!                                         ||   tryin' to stay hip" -
B. Idol
    
    
    
 
                    
                    
                        
                        Show replies by date