On 2011-12-27 16.36, Steve Davidson wrote: Hey folks... LAN costs are 4 by default (for VMS nodes anyway). If we make use of that then all we have to touch are the Multinet circuits. I set my Multinet circuits to 3 because they are much faster and I would prefer to use the most "efficient" path possible. You will loose the ability to use SET HOST/LAT, and MOM/MOP, and LAD/LAST, but that should me minor... Huh? I didn't follow that last part. Why would you loose the ability to use MOP and LAT when you change circuit costs for DECnet? Johnny -Steve -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Bob Armstrong Sent: Tuesday, December 27, 2011 10:00 AM To: hecnet at Update.UU.SE Subject: [HECnet] Circuit costs Peter Lothberg wrote: Here is a suggestion.... Set all Multinet links to cost 5 in both ends Set all bridged Ethernet interfaces to 10 Set all Multinet link nodes Level2 Area Routers Well, I like it. I'll do it if you do it... Actually that's a problem with DECnet - everybody _has_ to do their own; circuit costs are individually defined per node. Bob