1 May
2015
1 May
'15
6:46 p.m.
(and the embedded pictures were stripped)
Here?s a link to the tweet with pictures?
https://twitter.com/erazmus/status/594142359782166528
<https://twitter.com/erazmus/status/594142359782166528>
Ian
On May 1, 2015, at 9:44 AM, Ian McLaughlin <ian at
platinum.net> wrote:
Hi,
Can anyone identify this DEC case? I acquired it years ago and it?s been in storage until
I offered it to someone as a pedestal case for a MicroPDP11. When I pulled it out, I
realized it?s not the same as the case on my MicroPDP11 or MicroVAXII. Any ideas what it
is, and if it will actually fit a MicroPDP11?
Ian
--
DECtec mailing list
http://dectec.info
To unsubscribe from this list see page at:
http://dectec.info/mailman/listinfo/dectec_dectec.info
---
Filter service subscribers can train this email as spam or not-spam here:
http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=60D4AD5CF02111E49…
1 May
1 May
7:22 p.m.
New subject: [DECtec] Any DECheads able to identify this?
That looks very much like the case for a Pro, or possibly a Rainbow -
slightly hard to tell from the images. The Pro and Rainbow system boxes
are of different sizes and the cases are not interchangeable.
If you post the measurements of the case and the hole at the front that
will narrow it down.
Pute.
On 01/05/2015 16:46, Ian McLaughlin wrote:
(and the embedded pictures were stripped)
Here?s a link to the tweet with pictures?
https://twitter.com/erazmus/status/594142359782166528<https://twitter.co…
Ian
On May 1, 2015, at 9:44 AM, Ian McLaughlin<ian
at platinum.net> wrote:
Hi,
Can anyone identify this DEC case? I acquired it years ago and it?s been in storage until
I offered it to someone as a pedestal case for a MicroPDP11. When I pulled it out, I
realized it?s not the same as the case on my MicroPDP11 or MicroVAXII. Any ideas what it
is, and if it will actually fit a MicroPDP11?
Ian
--
DECtec mailing list
http://dectec.info
To unsubscribe from this list see page at:
http://dectec.info/mailman/listinfo/dectec_dectec.info
---
Filter service subscribers can train this email as spam or not-spam here:
http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=60D4AD5CF02111E49…
7:33 p.m.
New subject: [DECtec] Any DECheads able to identify this?
It probably got used for a lot of things, but it looks like a case for a
VAXstation 100 system unit. It's not clear in the picture - are there ribs
about 5-6 inches up on the inside, that a small desktop sized case could
rest on? The one I had, those ribs got in the way and kept it from having
enough room for a DEC PRO, which was a bit wider than the VS100 system box.
I wonder if the DECmate-II was narrow enough to fit?
--
Lee K. Gleason N5ZMR
Control-G Consultants
lee.gleason at comcast.net
-----Original Message-----
From: Ian McLaughlin
Sent: Friday, May 01, 2015 11:46 AM
To: DEC discussion list.
Cc: hecnet at Update.UU.SE
Subject: Re: [DECtec] Any DECheads able to identify this?
(and the embedded pictures were stripped)
Here?s a link to the tweet with pictures?
https://twitter.com/erazmus/status/594142359782166528
<https://twitter.com/erazmus/status/594142359782166528>
Ian
On May 1, 2015, at 9:44 AM, Ian McLaughlin <ian at
platinum.net> wrote:
Hi,
Can anyone identify this DEC case? I acquired it years ago and it?s been
in storage until I offered it to someone as a pedestal case for a
MicroPDP11. When I pulled it out, I realized it?s not the same as the case
on my MicroPDP11 or MicroVAXII. Any ideas what it is, and if it will
actually fit a MicroPDP11?
Ian
--
DECtec mailing list
http://dectec.info
To unsubscribe from this list see page at:
http://dectec.info/mailman/listinfo/dectec_dectec.info
---
Filter service subscribers can train this email as spam or not-spam here:
http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=60D4AD5CF02111E49…
--
DECtec mailing list
http://dectec.info
To unsubscribe from this list see page at:
http://dectec.info/mailman/listinfo/dectec_dectec.info
3 May
3 May
4:37 p.m.
New subject: [DECtec] Any DECheads able to identify this?
On 2015-05-01 18:46, Ian McLaughlin wrote:
(and the embedded pictures were stripped)
Here?s a link to the tweet with pictures?
https://twitter.com/erazmus/status/594142359782166528
Others have commented, but anyway. To me it looks like the floor stand
for the PRO. I have one in Sweden. The whole PRO box goes inside.
Johnny
Ian
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On May 1, 2015, at 9:44 AM, Ian McLaughlin
<ian at platinum.net
<mailto:ian at platinum.net>> wrote:
Hi,
Can anyone identify this DEC case? I acquired it years ago and it?s
been in storage until I offered it to someone as a pedestal case for a
MicroPDP11. When I pulled it out, I realized it?s not the same as the
case on my MicroPDP11 or MicroVAXII. Any ideas what it is, and if it
will actually fit a MicroPDP11?
Ian
--
DECtec mailing list
http://dectec.info
To unsubscribe from this list see page at:
http://dectec.info/mailman/listinfo/dectec_dectec.info
---
Filter service subscribers can train this email as spam or not-spam
here:
http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=60D4AD5CF02111E49…
3424
days inactive
3426
days old
3 comments
4 participants
participants (4)
-
bqt＠softjar.se -
ian＠platinum.net -
JACKSON_PN＠POBOX.COM -
lee.gleason＠comcast.net