Johnny, I would like you to reenable the bridge connection to Sampsa. It will be interesting to see the changes in the routing once this has happened. The current picture while quite impressive for SG1 clearly is not the real story (picture). CHIMPY is offline so it should not be in the picture until after Sampsa gets back from Finland. Thanks. -Steve -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: Wednesday, December 21, 2011 9:49 PM To: hecnet at Update.UU.SE Subject: Re: [HECnet] Multinet Tunnel Links defined On 2011-12-21 20:05, Sampsa wrote: BTW, bounced the router and bridge remotely (which I REALLY dislike doing) but no use. Is Johnny's side of the bridge running ok? Sampsa, I disabled you a few days ago when your connection (well, the adjacency to MIM= was going up and down every few minutes for about two days. I really dislike having so big logs with just CHIMPY up and down messages... :-) Are you more stable now? Johnny Sampsa On 21 Dec 2011, at 21:01, Steve Davidson wrote: Peter, Add an additional connection to Multinet for SG1. Use 69.21.253.230. I would set your costs (because you are an "end node") as follows: GORVAX = 3 Shortest distance and high speed SG1 = 5 Medium distance and medium speed LEGATO> 5 Longest distance and slower speed According to Sampsa, his bridge link is having issues (I have no access to that), and he is out of country, so connecting to SG1 is probably a great idea for now and won't hurt anything. SG1 like LEGATO is a dedicated Multinet router. All it does is that one function. -Steve -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Peter Lothberg Sent: Wednesday, December 21, 2011 2:08 PM To: hecnet at Update.UU.SE Cc: hecnet at Update.UU.SE Subject: RE: [HECnet] Multinet Tunnel Links defined Steve: Where are you located? I'm everywhere, the Vaxen is in Stockholm, Sweden. What is your IP address? I can add links to GORVAX and SG1 at any time. If your IP address is dynamic, then SG1 will deal with that automatically whereas GORVAX is a manual change. 192.108.200.211 It;s static. -Peter -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol