My house (Netherlands) is wired to all three phases of the mains grid. The default configuration is that just one phase gets a primary fuse (32A). Unless you've decided not to cook on a gas-fired stove in which case all phases get a fuse. The max value for a primary fuse is higher, 64A possibly. The primary fuse box is sealed. Behind it are secondary fuses, in my case 6 x 16A. Which allows you to blow the primary fuse. It gets repaired free of charge, but only once (every n years). I run all my real iron on one 16A fuse. Verzonden vanaf mijn BlackBerry 10-smartphone. Origineel bericht Van: Johnny Billquist Verzonden: maandag 26 januari 2015 00:28 Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] Number of nodes online a bit low? On 2015-01-25 22:06, John Wilson wrote: From: Steve Davidson <steve at davidson.net> Is your "lab" in your dining room? That's where all the 20A outlets are! (For hot plates etc. I guess, but also good for soldering irons and twist-lock adapters within reason.) What? Don't all houses have lots of 3-phase 16A 410V? :-) (OK, so I did pick mine with a twisted mind, but sadly I then moved to another country and all my computers in Sweden are just sitting there powered off..) Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol