26 Aug
2016
26 Aug
'16
2:14 p.m.
Hi. Have anyone managed to successfully install C81 V3.1 under RSX?
I decided to try and give it a go last night, and failed. The tape reads
ok, but there still seem to be a broken C81BLD.OLB in there.
This with the tape fetched from trailing-edge. Anyone have some other
copy, or who actually successfully did an installation from it?
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
26 Aug
26 Aug
8:07 p.m.
El 26 ag 2016, a les 14:14, Johnny Billquist <bqt
at softjar.se> va escriure:
Hi. Have anyone managed to successfully install C81 V3.1 under RSX?
I decided to try and give it a go last night, and failed. The tape reads ok, but there
still seem to be a broken C81BLD.OLB in there.
This with the tape fetched from trailing-edge. Anyone have some other copy, or who
actually successfully did an installation from it?
I tried some time ago and gave up when I found the same problem. If anyone has a working
copy I?d like to know about it too.
J.
29 Aug
29 Aug
6:53 a.m.
Same.
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of
Jordi Guillaumes i Pons
Sent: Saturday, 27 August 2016 4:08 AM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Cobol-81 V3.1 for RSX
El 26 ag 2016, a les 14:14, Johnny Billquist <bqt
at softjar.se> va escriure:
Hi. Have anyone managed to successfully install C81 V3.1 under RSX?
I decided to try and give it a go last night, and failed. The tape reads ok, but there
still seem to be a broken C81BLD.OLB in there.
This with the tape fetched from trailing-edge. Anyone have some other copy, or who
actually successfully did an installation from it?
I tried some time ago and gave up when I found the same problem. If anyone has a working
copy I?d like to know about it too.
J.
Disclaimer
The information in this e-mail is confidential and may contain content that is subject to
copyright and/or is commercial-in-confidence and is intended only for the use of the above
named addressee. If you are not the intended recipient, you are hereby notified that
dissemination, copying or use of the information is strictly prohibited. If you have
received this e-mail in error, please telephone Fujitsu Australia Limited on 02 9776 4555
or by reply e-mail to the sender and delete the document and all copies thereof.
Whereas Fujitsu Australia Limited would not knowingly transmit a virus within an email
communication, it is the receiver?s responsibility to scan all communication and any files
attached for computer viruses and other defects. Fujitsu Australia Limited does not accept
liability for any loss or damage (whether direct, indirect, consequential or economic)
however caused, and whether by negligence or otherwise, which may result directly or
indirectly from this communication or any files attached.
If you do not wish to receive commercial and/or marketing email messages from Fujitsu
Australia Limited, please email unsubscribe at au.fujitsu.com.
3 Sep
3 Sep
8:04 a.m.
On Mon, 29 Aug 2016, Boyanich, Alastair wrote:
Same.
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of
Jordi Guillaumes i Pons
Sent: Saturday, 27 August 2016 4:08 AM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Cobol-81 V3.1 for RSX
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
El 26 ag 2016, a les 14:14, Johnny Billquist
<bqt at softjar.se> va escriure:
Hi. Have anyone managed to successfully install C81 V3.1 under RSX?
I decided to try and give it a go last night, and failed. The tape reads ok, but there
still seem to be a broken C81BLD.OLB in there.
This with the tape fetched from trailing-edge. Anyone have some other copy, or who
actually successfully did an installation from it?
I tried some time ago and gave up when I found the same problem. If anyone has a working
copy I?d like to know about it too.
J.
Disclaimer
The information in this e-mail is confidential and may contain content that is subject to
copyright and/or is commercial-in-confidence and is intended only for the use of the above
named addressee. If you are not the intended recipient, you are hereby notified that
dissemination, copying or use of the information is strictly prohibited. If you have
received this e-mail in error, please telephone Fujitsu Australia Limited on 02 9776 4555
or by reply e-mail to the sender and delete the document and all copies thereof.
Whereas Fujitsu Australia Limited would not knowingly transmit a virus within an email
communication, it is the receiver?s responsibility to scan all communication and any files
attached for computer viruses and other defects. Fujitsu Australia Limited does not accept
liability for any loss or damage (whether direct, indirect, consequential or economic)
however caused, and whether by negligence or otherwise, which may result directly or
indirectly from this communication or any files attached.
If you do not wish to receive commercial and/or marketing email messages from Fujitsu
Australia Limited, please email unsubscribe at au.fujitsu.com.
2794
days inactive
2802
days old
3 comments
4 participants
participants (4)
-
Alastair.Boyanich＠au.fujitsu.com -
b4＠gewt.net -
bqt＠softjar.se -
jg＠jordi.guillaumes.name