On Tue, 14 May 2013, Cory Smelosky wrote: On Tue, 14 May 2013, Cory Smelosky wrote: On Tue, 14 May 2013, Cory Smelosky wrote: On Tue, 14 May 2013, G. wrote: On Tue, 14 May 2013 08:00:52 -0000, you wrote: Unfortunately it only /mostly/ works. MARLEY TOPS-10 03:23:12 CTY system 1 Connected to Node MARLEY(0) Line # 632 [Checking terminal type . . . found VT100] ..LOGIN 1,2 ..R OPR [CCPWFD Waiting for file daemon to start] %%TTY STOMPER - Starting And it stalls right there unless I repeatedly hit Ctrl/C... That happened to me more than once with some older pre-built monitors, then went away when I did my own install and build of 7.04, so I do not have a solution, and at the time I hadn't any knowledge about TOPS-10. That does not mean that now I'm very proficient on it, but... I have the reverse issue, surprisingly. The monitor provided with TWONKY works fine, but my generated monitors do not work with it. Upon further investigation, the problem is with OPR.EXE. It WILL NOT execute on my generated monitor. The one provided with TWONKY works fine though. .... Make sure that ORION and other Galaxy processes are all there and that none of them shows a "^C" or "TO" status (IIRC). Also compare processes between TWONKY and your installation and see if there are any differences. It looks like I'm not linking something in to the monitor or not enabling a certain feature. It'd be helpful if TWONKY provided the output from the MONGEN dialogue... OPR is just a client that talks to a daemon process so maybe it just stalls because the daemon is not working, not responding, or not there. Compare contents of SYS:SYSJOB.INI too. HTH, G. -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments http://pastebin.com/cAEXpme9 Not sure what I'm doing wrong as to what's keeping it from...doing anything. (I'm fairly certain what's happening is that it's not outputting to CTY) -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments Progress! DECnet works...but OPR.EXE still can't be run. -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments ?Stopcode CCPNUL, type=STOP, on CPU0 at 14-May-113 15:31:03 CPU Status Block APRID = 660442,,350001 ERA = 000000,,000000 CONI APR, = 007760,,000000 CONI PI, = 000000,,000320 CONI PAG, = 000000,,060001 DATAI PAG, = 700100,,000004 AR ARX Data Word = 000000,,000000 IO Page Fail Word = 000000,,000000 SBUS Diags: CNTRLR FNC 0 FNC 1 000010 006000,,000000 000500,,000000 Anyone familiar enough with TOPS-10 OPCODES to tell me where this is crashing? This is right after loading the monitor and pressing GO. -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments