I have made some improvements to NICE on my user mode router, although there is still quite a lot to do. It would be great if someone could try a MC NCP TELL A5RTR SHOW KNOWN CIRCUITS and let me know how it goes. If you do try it please consider running a packet sniffer when you do in case it fails as that would help me to diagnose the problem. Thanks Rob From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Rob Jarratt Sent: 04 April 2013 19:48 To: hecnet at Update.UU.SE Subject: RE: [HECnet] Who was doing that HECnet mapping work? Looks like someone tried and failed (from 8.403). If you want to try again please use a packet sniffer and send me the data. Thanks Rob From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Rob Jarratt Sent: 04 April 2013 06:22 To: hecnet at Update.UU.SE Subject: RE: [HECnet] Who was doing that HECnet mapping work? I am back online now. SHOW ADJ NODES won t work yet. You may fail to get a connection for SHOW KNOWN CIRCUITS, that is my next task to fix. Regards Rob From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Brian Hechinger Sent: 04 April 2013 01:35 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Who was doing that HECnet mapping work? That was me. I haven't touched that code in a while but I should go take a look at it again. It used SHOW KNOWN CIRCUITS and SHOW ADJ NODES. Let me know when you're back online and I'll play with that some more. -brian On 4/3/2013 6:55 PM, Rob Jarratt wrote: A while ago there was discussion of a program or DCL script that was automating the creation of a map of HECnet. It stumbled when it came to my user mode router because it did not implement NICE. Well, I have been doing some work to rectify that. The work is far from complete, but under the right circumstances and with a fair wind you can get A5RTR to tell you the output of SHOW KNOWN CIRCUITS. Who was doing that work, and which commands needed to be supported for the program/script to work? Regards Rob NB A5RTR is not on HECnet at the moment because I have had a change of IP address and I am waiting for Johnny to tell his bridge to re-read its config.