11 Feb
2016
11 Feb
'16
12:15 a.m.
Can I take my copy of VMS which does not have installed phave iv or decnet plus and
load one of them to use these commands? They weren't there earlier today but I
don't have networking installed with VMS.
http://blinkenbone.com/decnet/decnet-on-a-vax
@sys$manager:netconfig // is involved.
11 Feb
11 Feb
12:18 a.m.
On 02/10/2016 06:15 PM, Bill Cunningham wrote:
Can I take my copy of VMS which does not have
installed phave iv
or decnet plus and load one of them to use these commands? They
weren't there earlier today but I don't have networking installed with
VMS.
http://blinkenbone.com/decnet/decnet-on-a-vax
@sys$manager:netconfig // is involved.
Do you have the DECnet software. It isn't a part of VAX/VMS. It was a
different tape back in the day. Do you have the hobbyist iso with
DECnet software
on it?
Bill
--
Digital had it then. Don't you wish you could buy it now!
pechter-at-gmail.com http://xkcd.com/705/
12:21 a.m.
yeah openvms 7.3 I have I would have to install networking. Would I use dec$tailor ?
----- Original Message -----
From: William Pechter
To: hecnet at Update.UU.SE
Sent: Wednesday, February 10, 2016 6:18 PM
Subject: Re: [HECnet] VMS networking
On 02/10/2016 06:15 PM, Bill Cunningham wrote:
Can I take my copy of VMS which does not have
installed phave iv
or decnet plus and load one of them to use these commands? They
weren't there earlier today but I don't have networking installed with
VMS.
http://blinkenbone.com/decnet/decnet-on-a-vax
@sys$manager:netconfig // is involved.
Do you have the DECnet software. It isn't a part of VAX/VMS. It was a
different tape back in the day. Do you have the hobbyist iso with
DECnet software
on it?
Bill
--
Digital had it then. Don't you wish you could buy it now!
pechter-at-gmail.com http://xkcd.com/705/
12:26 a.m.
Bill Cunningham wrote:
yeah openvms 7.3 I have I would have to install
networking. Would I
use dec$tailor ?
nope... you have to do the install of the decnet package rather
than
tailor the existing os.
take a look at
http://labs.hoffmanlabs.com/node/382
To install DECnet-Plus, specify the DCL command:
|PRODUCT INSTALL/SOURCE=ddcu:[KITS.DECNET_PLUS_VAX073_KIT] DECNET_OSI|
To install DECnet Phase IV, enter the following DCL command:
|PRODUCT INSTALL/SOURCE=ddcu:[KITS.DECNET_PHASE_IV_VAX073_KIT]
DECNET_PHASE_IV|
----- Original Message -----
*From:* William Pechter <mailto:pechter at gmail.com>
*To:* hecnet at Update.UU.SE <mailto:hecnet at Update.UU.SE>
*Sent:* Wednesday, February 10, 2016 6:18 PM
*Subject:* Re: [HECnet] VMS networking
On 02/10/2016 06:15 PM, Bill Cunningham wrote:
--
Digital had it then. Don't you wish you could buy it now!
pechter-at-gmail.com http://xkcd.com/705/
Can I take my copy of VMS which does not have
installed phave iv
or decnet plus and load one of them to use these commands? They
weren't there earlier today but I don't have networking
installed
with
VMS.
http://blinkenbone.com/decnet/decnet-on-a-vax
@sys$manager:netconfig // is involved.
Do you have the DECnet software. It isn't a part of VAX/VMS. It
was a
different tape back in the day. Do you have the hobbyist iso with
DECnet software
on it?
Bill
--
Digital had it then. Don't you wish you could buy it now!
pechter-at-gmail.com http://xkcd.com/705/
12:28 a.m.
I can't remember now, but I think newer versions included it as part of the
VMS kit, older ones may not, but I am not sure. Yes, you run netconfig.com
to set it up, but you will need a PAK to license it, you can get PAKs from
the hobbyist programme.
Regards
Rob
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf
Of Bill Cunningham
Sent: 10 February 2016 23:16
To: hecnet <hecnet at update.uu.se>
Subject: [HECnet] VMS networking
Can I take my copy of VMS which does not have installed phave iv or
decnet plus and load one of them to use these commands? They weren't there
earlier today but I don't have networking installed with VMS.
http://blinkenbone.com/decnet/decnet-on-a-vax
@sys$manager:netconfig // is involved.
12:41 a.m.
I have a license that lasts for a year. I'm never used in thought I installed the
whole thing once by terminal on linux with simh and vms. I could load a couple of PAKs
can't I. The decnet and what's needed ?
----- Original Message -----
From: Robert Jarratt
To: hecnet at Update.UU.SE
Sent: Wednesday, February 10, 2016 6:28 PM
Subject: RE: [HECnet] VMS networking
I can't remember now, but I think newer versions included it as part of the VMS kit,
older ones may not, but I am not sure. Yes, you run netconfig.com to set it up, but you
will need a PAK to license it, you can get PAKs from the hobbyist programme.
Regards
Rob
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of
Bill Cunningham
Sent: 10 February 2016 23:16
To: hecnet <hecnet at update.uu.se>
Subject: [HECnet] VMS networking
Can I take my copy of VMS which does not have installed phave iv or decnet plus and
load one of them to use these commands? They weren't there earlier today but I
don't have networking installed with VMS.
http://blinkenbone.com/decnet/decnet-on-a-vax
@sys$manager:netconfig // is involved.
12:42 a.m.
On 02/10/2016 06:41 PM, Bill Cunningham wrote:
I have a license that lasts for a year. I'm never
used in thought I
installed the whole thing once by terminal on linux with simh and vms. I
could load a couple of PAKs can't I. The decnet and what's needed ?
You'll need to install the DVNETEND PAK.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
12:46 a.m.
$!
$ LICENSE REGISTER DVNETEND -
/ISSUER=DEC -
/AUTHORIZATION=HOBBYIST-VA-KEY12522-151026 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION_DATE=26-NOV-2016 -
/ACTIVITY=CONSTANT=100 -
/CHECKSUM=2-GOND-EILF-ILBP-DJDK
$!
$ LICENSE DISABLE DVNETEND/LOG/PRODUCER=DEC/ALL
$ LICENSE UNLOAD DVNETEND/LOG/PRODUCER=DEC
$ LICENSE ENABLE DVNETEND/LOG/PRODUCER=DEC/AUTH=HOBBYIST-VA-KEY12522-151026
$ LICENSE LOAD DVNETEND/LOG/PRODUCER=DEC
$ ENDIF
$ !
I have the above. When things are installed I usually an N to installing any PAKs. Cause I
always could later. How would I use this part of the hobbyist license?
----- Original Message -----
From: Dave McGuire
To: hecnet at Update.UU.SE
Sent: Wednesday, February 10, 2016 6:42 PM
Subject: Re: [HECnet] VMS networking
On 02/10/2016 06:41 PM, Bill Cunningham wrote:
I have a license that lasts for a year. I'm never
used in thought I
installed the whole thing once by terminal on linux with simh and vms. I
could load a couple of PAKs can't I. The decnet and what's needed ?
You'll need to install the DVNETEND PAK.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
10:33 a.m.
just cut and paste those lines in to a separate .com script and @ that.
I think that is what you are asking?
On 10 February 2016 at 23:46, Bill Cunningham <billcun at suddenlink.net>
wrote:
$!
$ LICENSE REGISTER DVNETEND -
/ISSUER=DEC -
/AUTHORIZATION=HOBBYIST-VA-KEY12522-151026 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION_DATE=26-NOV-2016 -
/ACTIVITY=CONSTANT=100 -
/CHECKSUM=2-GOND-EILF-ILBP-DJDK
$!
$ LICENSE DISABLE DVNETEND/LOG/PRODUCER=DEC/ALL
$ LICENSE UNLOAD DVNETEND/LOG/PRODUCER=DEC
$ LICENSE ENABLE
DVNETEND/LOG/PRODUCER=DEC/AUTH=HOBBYIST-VA-KEY12522-151026
$ LICENSE LOAD DVNETEND/LOG/PRODUCER=DEC
$ ENDIF
$ !
I have the above. When things are installed I usually an N to installing
any PAKs. Cause I always could later. How would I use this part of the
hobbyist license?
----- Original Message -----
*From:* Dave McGuire <mcguire at neurotica.com>
*To:* hecnet at Update.UU.SE
*Sent:* Wednesday, February 10, 2016 6:42 PM
*Subject:* Re: [HECnet] VMS networking
On 02/10/2016 06:41 PM, Bill Cunningham wrote:
I have a license that lasts for a year. I'm
never used in thought I
installed the whole thing once by terminal on linux with simh and vms. I
could load a couple of PAKs can't I. The decnet and what's needed ?
You'll need to install the DVNETEND PAK.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
3554
days inactive
3555
days old
8 comments
5 participants
participants (5)
-
billcun＠suddenlink.net -
mark＠wickensonline.co.uk -
mcguire＠neurotica.com -
pechter＠gmail.com -
robert.jarratt＠ntlworld.com