Add an additional connection to Multinet for SG1. Use 69.21.253.230. I would set your costs (because you are an "end node") as follows: GORVAX = 3 Shortest distance and high speed SG1 = 5 Medium distance and medium speed LEGATO > 5 Longest distance and slower speed It ended up being: DECNET-CONFIG>show Circuit Name IP Destination Cost HelloTimer ------------ --------------- ---- ----------- TCP-0-0 64.142.52.93 10 300 TCP-0-1 188.220.63.6 5 300 TCP-0-2 69.21.253.230 7 300 It;s actually a routing-IV node... -:) My speed is limited by the Uvax2, not the network (well the dequna is only 10Mbit...) I have mentioned it before, but I also have a cisco router on the same LAN that can do DECnet in IP the cisco way if anyone wan't to try. Thanks! --P