Yup, I can connect now. Looks good.
Thanks,Brian.
Sent from Yahoo Mail for iPhone
On Sunday, August 24, 2025, 1:00 PM, John H. Reinhardt
<johnhreinhardt(a)thereinhardts.org> wrote:
I think there might have been a network issue for a little while. Earlier I could not
connect to IMPVAX for this status page, but now I can. And the status shows many links
not connected and they usually are. PYRTR shows up 28 days though.
http://impvax.duckdns.org/pyrtr/index.html
John H. Reinhardt
On 8/24/2025 11:51 AM, Johnny Billquist wrote:
PYRTR is up and running.
.ncp tell pyrtr sho exec
Node summary as of 24-AUG-25 18:50:21
Executor node = 31.3 (PYRTR)
State = On, Identification = DECnet/Python Area-31 Router at Washington, DC
.trd pyrtr
Trace DECnet route
Tracing from 1.13 (MIM) to 31.3 (PYRTR)
0: 1.13 (MIM) [+3 IP-0-0 -> 1.1022 (PYHEC)] Tot: 0
1: 1.1022 (PYHEC) [+4 DMC-15 -> 31.3 (PYRTR)] Tot: 3
2: 31.3 (PYRTR) Tot: 7
Hops: 2 Total cost: 7
.
Johnny
On 2025-08-24 16:27, Brian Roth wrote:
Hello,
We had a power outage last night and now bringing all my nodes back up I am getting
"Error initializing Multinet datalink" to area 31 specifically Supratim Sanyal
31.3 PYRTR. I wanted to see if there was a circuit down before I start troubleshooting
this.
Thanks,
Brian.
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se