Works for me! -Steve ________________________________ From: owner-hecnet at Update.UU.SE on behalf of Oleg Safiullin Sent: Thu 1/5/2012 11:35 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Router for area 1 This happens because when there are multiple routing nodes for the same area, DECnet uses the one with the highest address. The obvious solution would be for Johnny to renumber MIM as, say, 1.1023. Hmm. CTAKAH is set to lower router priority than MIM. I thought this is enough to tell that MIM is preffered router... There's no need for CTAKAH to be and area router, so I'll downgrade it to endnode...