On 2013-04-07 00:54, Rob Jarratt wrote: I have made some improvements to NICE on my user mode router, although there is still quite a lot to do. It would be great if someone could try a MC NCP TELL A5RTR SHOW KNOWN CIRCUITS and let me know how it goes. If you do try it please consider running a packet sniffer when you do in case it fails as that would help me to diagnose the problem. Why don't you log in to MIM, and try yourself? Johnny Thanks Rob *From:*owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] *On Behalf Of *Rob Jarratt *Sent:* 04 April 2013 19:48 *To:* hecnet at Update.UU.SE *Subject:* RE: [HECnet] Who was doing that HECnet mapping work? Looks like someone tried and failed (from 8.403). If you want to try again please use a packet sniffer and send me the data. Thanks Rob *From:*owner-hecnet at Update.UU.SE <mailto:owner-hecnet at Update.UU.SE> [mailto:owner-hecnet at Update.UU.SE] *On Behalf Of *Rob Jarratt *Sent:* 04 April 2013 06:22 *To:* hecnet at Update.UU.SE <mailto:hecnet at Update.UU.SE> *Subject:* RE: [HECnet] Who was doing that HECnet mapping work? I am back online now. SHOW ADJ NODES won t work yet. You may fail to get a connection for SHOW KNOWN CIRCUITS, that is my next task to fix. Regards Rob *From:*owner-hecnet at Update.UU.SE <mailto:owner-hecnet at Update.UU.SE> [mailto:owner-hecnet at Update.UU.SE] *On Behalf Of *Brian Hechinger *Sent:* 04 April 2013 01:35 *To:* hecnet at Update.UU.SE <mailto:hecnet at Update.UU.SE> *Subject:* Re: [HECnet] Who was doing that HECnet mapping work? That was me. I haven't touched that code in a while but I should go take a look at it again. It used SHOW KNOWN CIRCUITS and SHOW ADJ NODES. Let me know when you're back online and I'll play with that some more. -brian On 4/3/2013 6:55 PM, Rob Jarratt wrote: A while ago there was discussion of a program or DCL script that was automating the creation of a map of HECnet. It stumbled when it came to my user mode router because it did not implement NICE. Well, I have been doing some work to rectify that. The work is far from complete, but under the right circumstances and with a fair wind you can get A5RTR to tell you the output of SHOW KNOWN CIRCUITS. Who was doing that work, and which commands needed to be supported for the program/script to work? Regards Rob NB A5RTR is not on HECnet at the moment because I have had a change of IP address and I am waiting for Johnny to tell his bridge to re-read its config. -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol