Just a side note: I discovered that with a bit of jiggling and poking the PAKGEN I have that does VMS PAKs works for Tru64 too. Just in case anyone has lost their PAK.. On 17 Jul 2010, at 11:04, H Vlems wrote: A pity because despite its elegance and well thought out design DECnet-Plus (or phase V or DECnet OSI) is a lot moredifficult to maintain and manage than phase IV. I have the appropriate DECnet versions for the three Tru64 versions that I run. My experience with Tru64 is very limited and I do not feel an urge to get more confused by running versions even older than V5.0... Hans -----Oorspronkelijk bericht----- Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Mark Wickens Verzonden: zaterdag, juli 2010 10:48 Aan: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] DECNET Phase IV for Tru 64 On Sat, 2010-07-17 at 08:33 +0100, Mark Wickens wrote: On Sat, 2010-07-17 at 00:40 +0100, Sampsa Laine wrote: I remember people discussing running DECNET on Tru64 here a while back, is there a DECNET IV package available for it? Anyone have a copy? Sampsa Yes, I've got it here - I'll put the packages on tiger in the anonymous ftp account. Apologies, It is decnet+, the version I use is 4.0B on 4.0G - I didn't have any problems configuring it up for use with HECnet however. I can check for a more recent version if you don't have one. Mark. Geen virus gevonden in het binnenkomende-bericht. Gecontroleerd door AVG - www.avg.com Versie: 9.0.839 / Virusdatabase: 271.1.1/3009 - datum van uitgifte: 07/16/10 21:19:00