I'm reading chapter 8 of the Network Management manual (DECnet plus doc kit). \Hans -----Oorspronkelijk bericht----- Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Sampsa Laine Verzonden: zondag, juni 2010 23:06 Aan: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] Attaching to hecnet I've got a SIMH VAX with Decnet+ set up somewhere, so I might be up for trying to get the Decnet+-IP-tunnel thingie going. Sampsa On 27 Jun 2010, at 22:03, Johnny Billquist wrote: Kari Uusim ki wrote: On 27.6.2010 13:44, Mark Wickens wrote: Hi Guys, There is some info on http://hecnet.eu but at the moment it is very targeted to a 'standard' installation. If you end up using a non-standard installation please let me know what you have to do so I can add the info to the website. If you want your own area Johnny is your man - he is busy but will get round to answering your query. I'd be interested to know if it's possible to get the bridge working under tru64 also... Regards, Mark . Well, what is standard and what is not. That is a question of from which point of view you are thinking, isn't it? ;) To some people the DECnet-plus or Multinet with DECnet-over-IP is standard and to others the Cisco tunneling is standard. To the HECnet community the bridge software is standard.