On Thu, 20 Jun 2013, Gregg Levine wrote: On Thu, Jun 20, 2013 at 7:36 PM, Cory Smelosky <b4 at gewt.net> wrote: Evening all, marianne#ping 20.1 Type escape sequence to abort. Sending 5, 100-byte DECnet echos to atg 0 area.node 20.1, timeout is 5 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 468/476/488 ms Request # 6; Show Known Circuits Summary Completed Circuit State Loopback Adjacent Name Node NI-0-0 On 9.1023 $set host wopr [Attempting a connection, CTERM Connect failed - Process aborted It hates to connect to anything else...incoming connections break, too...Someone else on the list tried to debug it (I forgot who) and he found absolutely no issues that would explain this. Any ideas why it works but it doesn't? -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects Hello! Let's see, first look for disconnected cables. Then check to see what the status on your regular connection to the Internet. While your at it also check to see what the status is on your router system. It might need to be reset. All of those check out. I really don't get it. I'll debug all packets at the switch level. ---- Of course the fact that there are a dozen Yetis at work trying to crash all of China for their contribution to the "Free Tibet" movement probably isn't at fault there, where you are. ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again." -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects