I have been thinking about this, anybody knows if a 100 NIC adapter attached to the AUI port would actually go 100MB full duplex on the VAX ? On the Alpha it does, but I have never tried the VAX, I would think it should, it does in the Stromasys and Simh emulators, but I'm guessing. On 2/13/13, Steve Davidson <jeep at scshome.net> wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Jordi Guillaumes i Pons Sent: Wednesday, February 13, 2013 14:47 To: hecnet at Update.UU.SE Subject: Re: [HECnet] NT 4 on AlphaServer es40 El 13/02/2013, a les 18:57, Johnny Billquist <bqt at softjar.se> va escriure: Which is silly in it self. Why even search the node database? After all, the MOP request holds all the information needed to serve it. RSX don't do a lookup at a boot request. It just serves it. But even so, it is surprising that even a fairly modern VAX can't keep up with a PDP-11 here. Funny thing: a real VAX (VS 4000/60) can't keep up with an EMULATED PDP-11 running in a Raspberry Pi ;) I had to disable service in the emulated PDPs or else they tried to serve the OS to my 4000/90 ;) Really? Are you sure that does not have more to do with the fact that the VAX only has a 10M NIC where as the Raspberry Pi has a 10/100 NIC. I have not clocked the virtual 11/83 on my RPI but the virtual VAX runs at about 1.6 VUPs. That would put it in the VAX-11/785 class - ie not all that fast... -Steve Jordi Guillaumes i Pons jg at jordi.guillaumes.name HECnet: BITXOV::JGUILLAUMES