On 2013-03-19 23:38, Cory Smelosky wrote: On 19 Mar 2013, at 23:37, "Dave McGuire" <mcguire at neurotica.com> wrote: On 03/19/2013 11:03 PM, Cory Smelosky wrote: I've gotten OpenSXCE installed and I have managed to get zones to work. It took a little bit of effort and a lot of time but I have done it. Nice work. You really should document how you did it. Thank you. I only had to modify one file to make it work it was a surprisingly simple fix. I will definitely document it if my next task succeeds. I'm going to do a bizarre chain starting at OpenSolaris build 134 and jumping to experimental OpenIndiana 150 for SPARC via IPS, then I will create a zone there on my zones zpool and use it as a template. I will then detach that zone and go back to OpenSXCE. I will then clone that zone for use with the real zones. Having 3 working drives makes this quick and safe. ;) If all of this works, I can share me templates with you if you'd like. Yow. You have absorbed Solaris amazingly quickly. I can pick things up quite quickly if I put my mind to it. ;) -Dave -- Dave McGuire, AK4HZ New Kensington, PA I am now having an issue... %SYSTEM-F-ABORT, abort , fatal hardware error %NCP-W-UNRCMP, Unrecognized component , Circuit Circuit = QNA-0 The xq device is attached correctly, and it works in other OSes...but OpenVMS seems to not see it. Device XQA0:, device type unknown, is online, network device, device is a template only. Error count 5 Operations completed 0 Owner process "" Owner UIC [SYSTEM] Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G,W Reference count 0 Default buffer size 512 Besides that, OpenVMS doesn't show it anywhere, as multinet doesn't come up on it and SHO KNOWN CIR doesn't list the circuit. I can't test 3.9-0 as it doesn't build, so i'm limited to latest git. ;) Is this a bug or am I doing something wrong? ;) -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Experiments