Sent from mobile device that advertises itself for no good reason On 20 May 2014, at 23:32, John Wilson <wilson at dbit.com> wrote: From: Cory Smelosky <b4 at gewt.net> I PROBABLY have a PIC around here somewhere...but I don't know where and I know I DEFINTIELY don't have a crystal of that frequency. Then you just need a longer loop. Ahh. I have an arduino that I SUPPOSE could be hacked to work. I'm sure it could -- maybe add a 2N7000 or something as the driver since I think it's officialy an open-collector line (although I could be wrong and anyway since it's not shared, it probably doesn't matter much). Mmm. Does the bus itself need any special configuration? I can't think what this would mean. Just ground the "event" line every 50th/60th and you're golden. The Q22 mod was surprisingly easy too (since there were only four slots, with wire-wrap connectors). If the power supply hadn't later done what all power supplies eventually do, I'd still be running that box... Oh! Ground the "EVENT" line of the bus! Is that brought out through the front panel plug? I imagine it would be...but I know little about this backplane! I DO have the front panel with an LTC from the NETCOM I can borrow for awhile (No need for it until I patch ZRQCH0. Yeah bringing it in from another box should be OK as long as everyone agrees about ground reference. Ah! John Wilson D Bit