On 07/09/11 13:57, hvlems at zonnet.nl wrote: Two options: 1 rerun Netconfig, 2 manually create the circuit EWA-1 and line EWA-1 (assuming that the current ones are called EWA-0). Hans ------Origineel bericht------ Van: Mark Wickens Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] New network card in the Alpha, how do I reconfigure DECNET? Verzonden: 7 september 2011 14:30 Hi, I've got an AlphaServer 300 running as a clustered satellite node from an AlphaServer 1000A. The 300 has a built in DE450 network card (10MB). I've augmented that with a PCI DE500 100MB network card. My question is how I move DECnet off the old card (which is now disconnected) to the new card. I've tried running NETCONFIG but this doesn't seem to recognise the new card. The old card is EWA0: the new one EWB0: The remote booting and cluster server are running fine, so the machine boots OK off the new card, and I have reconfigured TCP/IP for the new card, it's just DECNET I'm stumbling with. The old card won't be connected to the network any more. Thanks for the help, Mark. Verzonden vanaf mijn draadloze BlackBerry -toestel Thanks, I did re-run netconfig and it didn't seem to make any difference, but maybe I got caught in the make change/reboot trap. I've just rebooted and it's working. So for reference could I ask the question of how decnet associates a network controller with the decnet configuration? Cheers, Mark