WEEEIRD - the SRM is not on serial only, not kbd/monitor as before. On 17 Sep 2011, at 11:46, Sampsa Laine wrote: I did, and found a totally superfluous (to my needs) QLogic SCSI card + drive in there. I've got a KZPAC attached with a BA365 - the machine boots, but just to a blue screen. With the Qlogic in, it won't even boot. Is there some magic key setting to reset the SRM ? Sampsa On 17 Sep 2011, at 11:40, hvlems at zonnet.nl wrote: Possibly cards became unseated. Open it up and remove all boards and reseat them. If that doesn't work. ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] DS10 fucked - 3 beeps. Any ideas? Verzonden: 17 september 2011 11:52 Hi, So I just had my DS10 perfectly configured but on its side, and it fell over. Now it just gives me 3 beeps. What do I do, disassemble the whole thing and reseat the RAM or what?