30 Jul
2019
30 Jul
'19
5:10 p.m.
I've worked on RSTS and DECnet/E for a long time but I only very rarely do a formal
install, so I don't have the knowledge handy.
I just did a V10.1 install, and now would like to do the matching DECnet install, but I
can't figure out how to do that and I can't find a DECnet/E installation manual.
Can anyone give a quick outline of how to do this?
paul
30 Jul
30 Jul
5:30 p.m.
Hi,
As long as you have an actual Ethernet device available, XH0:, and the tape device
available, then, as [1,2]
@[0,1]install layered
And go through the dialogue
Keith
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Paul
Koning
Sent: 30 July 2019 16:11
To: hecnet at update.uu.se
Subject: [HECnet] DECnet/E install
I've worked on RSTS and DECnet/E for a long time but I only very rarely do a formal
install, so I don't have the knowledge handy.
I just did a V10.1 install, and now would like to do the matching DECnet install, but I
can't figure out how to do that and I can't find a DECnet/E installation manual.
Can anyone give a quick outline of how to do this?
paul
7:03 p.m.
Perfect. Thanks much, that did the trick.
I learned something new: NML.TSK no longer exists in this version, it's now done by
NCP.TSK.
paul
On Jul 30, 2019, at 11:30 AM, Keith Halewood
<Keith.Halewood at pitbulluk.org> wrote:
Hi,
As long as you have an actual Ethernet device available, XH0:, and the tape device
available, then, as [1,2]
@[0,1]install layered
And go through the dialogue
Keith
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of
Paul Koning
Sent: 30 July 2019 16:11
To: hecnet at update.uu.se
Subject: [HECnet] DECnet/E install
I've worked on RSTS and DECnet/E for a long time but I only very rarely do a formal
install, so I don't have the knowledge handy.
I just did a V10.1 install, and now would like to do the matching DECnet install, but I
can't figure out how to do that and I can't find a DECnet/E installation manual.
Can anyone give a quick outline of how to do this?
paul
8:32 p.m.
Paul,
You have a priv account on PLUTO:: that has many layered products. You are welcome to
browse around for whatever you need. The kits are also available - just ask and I will
make them directly available.
-Steve
SF:IP2
On Jul 30, 2019, at 11:10, Paul Koning <paulkoning
at comcast.net> wrote:
I've worked on RSTS and DECnet/E for a long time but I only very rarely do a formal
install, so I don't have the knowledge handy.
I just did a V10.1 install, and now would like to do the matching DECnet install, but I
can't figure out how to do that and I can't find a DECnet/E installation manual.
Can anyone give a quick outline of how to do this?
paul
1736
days inactive
1736
days old
3 comments
3 participants
participants (3)
-
Keith.Halewood＠pitbulluk.org -
paulkoning＠comcast.net -
steve＠davidson.net