3.8 VUPS for the 3900 only! Verzonden vanaf mijn draadloze BlackBerry -toestel From: "Steve Davidson" <jeep at scshome.net> Sender: owner-hecnet at Update.UU.SE Date: Sun, 28 Nov 2010 16:05:44 -0500 To: <hecnet at Update.UU.SE> ReplyTo: hecnet at Update.UU.SE Subject: RE: [HECnet] SIMH VAX memory weirdness Sampsa, What kind of a laptop and what OS are you running? The 3900 series systems ran about 38 VUPs and the 780 ran at 1 VUP... -Steve From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Sampsa Laine Sent: Sunday, November 28, 2010 15:54 To: hecnet at Update.UU.SE Subject: Re: [HECnet] SIMH VAX memory weirdness That worked! Cool, I now have a 14 VUPS laptop with 512 megs of RAM. Just trying to get DECWINDOWS to work, I'm assuming I can get it to display remotely even though it has no graphics hardware built in, right? Sampsa On 28 Nov 2010, at 20:49, H Vlems wrote: The VAX 11/780 may well have been limited to just 32 MB, I can t remember. Try modifying PHYSICAL_PAGES, perhaps the microcode that comes with simh was modified. Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Sampsa Laine Verzonden: zondag, november 2010 21:46 Aan: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] SIMH VAX memory weirdness Ah, bummer - what about the 11/780? Sampsa On 28 Nov 2010, at 20:44, Steve Davidson wrote: > Sampsa, > > I'm pretty sure that the 3900 series machines only supported 64MB max > and that is what you are emulating. > > -Steve > > > -----Original Message----- > From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On > Behalf Of Sampsa Laine > Sent: Sunday, November 28, 2010 15:41 > To: hecnet at Update.UU.SE > Subject: Re: [HECnet] SIMH VAX memory weirdness > > Still only seeing 64 MB in the OS.... > > Sampsa > > > On 28 Nov 2010, at 20:27, Oleg Safiullin wrote: > >> On 29.11.2010 2:20, Sampsa Laine wrote: >>> I just increased the memory on one of my SIMH VAX VM's to 512 MB from > 64 MB - the system boots fine but SHOW MEMORY (under OpenVMS 7.3-1) > still reports 64 MB. >>> >>> Do I need to tell the VMS installation about the new RAM somehow? How > much RAM does 7.3-1 (VAX) support anyway? >>> >>> Sampsa >>> >>> >> >> Try to replace ka655.bin firmware with the following file: >> >> http://pdp-11.org.ru/~form/files/ka655x.bin > Geen virus gevonden in dit bericht. Gecontroleerd door AVG - www.avg.com Versie: 10.0.1170 / Virusdatabase: 426/3285 - datum van uitgifte: 11/28/10