11 Sep
2015
11 Sep
'15
4:32 p.m.
Guys,
I just tried to burn my 8.4 ISO image for IA64, and the file is corrupt.
Does anybody happen to have a copy of this?
sampsa
11 Sep
11 Sep
4:38 p.m.
Yes, but I have a fairly slow line at 500 kB/s. :-(
? Origineel bericht ?
Van: Sampsa Laine
Verzonden: vrijdag 11 september 2015 16:32
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] VMS IA64 8.4 .ISO image?
Guys,
I just tried to burn my 8.4 ISO image for IA64, and the file is corrupt.
Does anybody happen to have a copy of this?
sampsa
10:18 p.m.
On 09/11/2015 10:32 AM, Sampsa Laine wrote:
I just tried to burn my 8.4 ISO image for IA64, and
the file is
corrupt.
Does anybody happen to have a copy of this?
I have what I believe to be three images of this, I don't know if
they're different. I've put them up for you at the URL below. Please
let me know when you have them so I can remove them from the server.
I have good outbound bandwidth, but it's getting hit hard, so I
don't know what your transfer rates will be like.
http://www.neurotica.com/misc/vms/
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
12 Sep
12 Sep
12:35 p.m.
New subject: IRC channel on freenode.net
As you guys know, there's a #hecnet channel on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
sampsa
12:38 p.m.
New subject: IRC channel on freenode.net
On 2015-09-12 12:35, Sampsa Laine wrote:
As you guys know, there's a #hecnet channel on
irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
12:39 p.m.
New subject: IRC channel on freenode.net
I didn't know you had an IRC client on MIM!
How do I run it? Is there a guest account?
sampsa
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-09-12 12:35, Sampsa Laine wrote:
As you guys know, there's a #hecnet channel
on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
12:44 p.m.
New subject: IRC channel on freenode.net
Just logged into my account, and when I run mail, I don't get that nice menu, just a
VMS-type client..
How do I change that?
sampsa
On 12 Sep 2015, at 11:39, Sampsa Laine <sampsa at mac.com> wrote:
I didn't know you had an IRC client on MIM!
How do I run it? Is there a guest account?
sampsa
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-09-12 12:35, Sampsa Laine wrote:
_______________________________________________
Hecnet-list mailing list
Hecnet-list at lists.sonic.net
https://lists.sonic.net/mailman/listinfo/hecnet-list As you guys know, there's a #hecnet channel
on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
12:58 p.m.
New subject: IRC channel on freenode.net
On 2015-09-12 12:44, Sampsa Laine wrote:
Just logged into my account, and when I run mail, I
don't get that nice menu, just a VMS-type client..
How do I change that?
Maybe you have some strange terminal type set?
Johnny
sampsa
On 12 Sep 2015, at 11:39, Sampsa Laine <sampsa at mac.com> wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
I didn't know you had an IRC client on MIM!
How do I run it? Is there a guest account?
sampsa
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-09-12 12:35, Sampsa Laine wrote:
_______________________________________________
Hecnet-list mailing list
Hecnet-list at lists.sonic.net
https://lists.sonic.net/mailman/listinfo/hecnet-list As you guys know, there's a #hecnet channel
on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
12:58 p.m.
New subject: IRC channel on freenode.net
On 2015-09-12 12:39, Sampsa Laine wrote:
I didn't know you had an IRC client on MIM!
Heh...
How do I run it? Is there a guest account?
GUEST/GUEST
You run IRC by typing IRC.
Also, the user interface is silly simple. It understands a few commands.
Join a channel:
:j <channel>
Send a message to a specific user/channel:
:m <destination> <message>
Set default channel:
:s <channel>
Change your nick:
:n <nick>
Quit:
:q
Everything else not starting with colon is sent to your default channel
as a message.
Anything starting with : is send as a command.
So, for example, to see who is on #hecnet, you'd give
":names #hecnet"
Code is at MIM::DU:[IRC]IRC.B2S
Johnny
sampsa
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2015-09-12 12:35, Sampsa Laine wrote:
As you guys know, there's a #hecnet channel
on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
12:59 p.m.
New subject: IRC channel on freenode.net
Ohhhhhh...I was using the standard IRC /JOIN etc.
Sampsa
On 12 Sep 2015, at 11:58, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-09-12 12:39, Sampsa Laine wrote:
I didn't know you had an IRC client on MIM!
Heh...
How do I run it? Is there a guest account?
GUEST/GUEST
You run IRC by typing IRC.
Also, the user interface is silly simple. It understands a few commands.
Join a channel:
:j <channel>
Send a message to a specific user/channel:
:m <destination> <message>
Set default channel:
:s <channel>
Change your nick:
:n <nick>
Quit:
:q
Everything else not starting with colon is sent to your default channel as a message.
Anything starting with : is send as a command.
So, for example, to see who is on #hecnet, you'd give
":names #hecnet"
Code is at MIM::DU:[IRC]IRC.B2S
Johnny
sampsa
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol On 2015-09-12 12:35, Sampsa Laine wrote:
As you guys know, there's a #hecnet channel
on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
12:48 p.m.
New subject: IRC channel on freenode.net
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-09-12 12:35, Sampsa Laine wrote:
I think there's a bug in your code, I have to hit enter like 30 times to get past all
the MOTD msgs etc...
As you guys know, there's a #hecnet channel
on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
1 p.m.
New subject: IRC channel on freenode.net
On 2015-09-12 12:48, Sampsa Laine wrote:
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
You need to have your terminal set to full duplex, or else RSX will not
do both reading and writing in parallel. It might also be that if you
log in with CTERM, that driver do not support full duplex I/O, but I
think it does.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2015-09-12 12:35, Sampsa Laine wrote:
I think there's a bug in your code, I have to hit enter like 30 times to get past all
the MOTD msgs etc... As you guys know, there's a #hecnet channel
on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
1:04 p.m.
New subject: IRC channel on freenode.net
How do I set the term to full duplex?
Sorry, total RSX noob here..
On 12 Sep 2015, at 12:00, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-09-12 12:48, Sampsa Laine wrote:
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
You need to have your terminal set to full duplex, or else RSX will not do both reading
and writing in parallel. It might also be that if you log in with CTERM, that driver do
not support full duplex I/O, but I think it does.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
_______________________________________________
Hecnet-list mailing list
Hecnet-list at lists.sonic.net
https://lists.sonic.net/mailman/listinfo/hecnet-list On 2015-09-12 12:35, Sampsa Laine wrote:
I think there's a bug in your code, I have to hit enter like 30 times to get past all
the MOTD msgs etc... As you guys know, there's a #hecnet channel
on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
1:25 p.m.
New subject: IRC channel on freenode.net
On 2015-09-12 13:04, Sampsa Laine wrote:
How do I set the term to full duplex?
In MCR you use SET /FDX=TI:
in DCL you use SET TERM/FULL
Sorry, total RSX noob here..
If you know a bit of VMS, and you are using DCL under RSX, it will be
pretty much the same commands...
Johnny
On 12 Sep 2015, at 12:00, Johnny Billquist <bqt at softjar.se> wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2015-09-12 12:48, Sampsa Laine wrote:
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
You need to have your terminal set to full duplex, or else RSX will not do both reading
and writing in parallel. It might also be that if you log in with CTERM, that driver do
not support full duplex I/O, but I think it does.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
_______________________________________________
Hecnet-list mailing list
Hecnet-list at lists.sonic.net
https://lists.sonic.net/mailman/listinfo/hecnet-list On 2015-09-12 12:35, Sampsa Laine wrote:
> As you guys know, there's a #hecnet channel on irc.freenode.net.
>
> I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
I think there's a bug in your code, I have to hit enter like 30 times to get past all
the MOTD msgs etc...
1:27 p.m.
New subject: IRC channel on freenode.net
One last bug you might want to take a look at whenever you have time:
Why can't I connect to irc.efnet.net?
It's working right now on two other clients..
sampsa
On 12 Sep 2015, at 12:25, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-09-12 13:04, Sampsa Laine wrote:
How do I set the term to full duplex?
In MCR you use SET /FDX=TI:
in DCL you use SET TERM/FULL
Sorry, total RSX noob here..
If you know a bit of VMS, and you are using DCL under RSX, it will be pretty much the
same commands...
Johnny
On 12 Sep 2015, at 12:00, Johnny Billquist <bqt at softjar.se> wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
_______________________________________________
Hecnet-list mailing list
Hecnet-list at lists.sonic.net
https://lists.sonic.net/mailman/listinfo/hecnet-list On 2015-09-12 12:48, Sampsa Laine wrote:
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
> On 2015-09-12 12:35, Sampsa Laine wrote:
>> As you guys know, there's a #hecnet channel on irc.freenode.net.
>>
>> I just configured a logon called "hecirc" on PYFFLE:: that
automatically connects you to that channel via a text based UI..
>
> Or else people can log in to MIM, and just run my IRC client there. :-)
> (Or modify/improve it any what they see fit. It's written in BASIC+2...)
>
> Johnny
I think there's a bug in your code, I have to hit enter like 30 times to get past all
the MOTD msgs etc...
You need to have your terminal set to full duplex, or else RSX will not do both reading
and writing in parallel. It might also be that if you log in with CTERM, that driver do
not support full duplex I/O, but I think it does.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
_______________________________________________
Hecnet-list mailing list
Hecnet-list at lists.sonic.net
https://lists.sonic.net/mailman/listinfo/hecnet-list
1:33 p.m.
New subject: IRC channel on freenode.net
On 2015-09-12 13:27, Sampsa Laine wrote:
One last bug you might want to take a look at whenever
you have time:
Why can't I connect to irc.efnet.net?
It's working right now on two other clients..
Well, it do not respond to ping, it do not seem to respond to port 6667.
Either the machine (or something along the way) is filtering out packets
from MIM, or possibly IRC is used on a different port?
Johnny
sampsa
On 12 Sep 2015, at 12:25, Johnny Billquist <bqt at softjar.se> wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2015-09-12 13:04, Sampsa Laine wrote:
How do I set the term to full duplex?
In MCR you use SET /FDX=TI:
in DCL you use SET TERM/FULL
Sorry, total RSX noob here..
If you know a bit of VMS, and you are using DCL under RSX, it will be pretty much the
same commands...
Johnny
On 12 Sep 2015, at 12:00, Johnny Billquist <bqt at softjar.se> wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
_______________________________________________
Hecnet-list mailing list
Hecnet-list at lists.sonic.net
https://lists.sonic.net/mailman/listinfo/hecnet-list On 2015-09-12 12:48, Sampsa Laine wrote:
>
> On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
>
>> On 2015-09-12 12:35, Sampsa Laine wrote:
>>> As you guys know, there's a #hecnet channel on irc.freenode.net.
>>>
>>> I just configured a logon called "hecirc" on PYFFLE:: that
automatically connects you to that channel via a text based UI..
>>
>> Or else people can log in to MIM, and just run my IRC client there. :-)
>> (Or modify/improve it any what they see fit. It's written in BASIC+2...)
>>
>> Johnny
>
> I think there's a bug in your code, I have to hit enter like 30 times to get past
all the MOTD msgs etc...
You need to have your terminal set to full duplex, or else RSX will not do both reading
and writing in parallel. It might also be that if you log in with CTERM, that driver do
not support full duplex I/O, but I think it does.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
_______________________________________________
Hecnet-list mailing list
Hecnet-list at lists.sonic.net
https://lists.sonic.net/mailman/listinfo/hecnet-list
1:50 p.m.
New subject: IRC channel on freenode.net
On 2015-09-12 13:33, Johnny Billquist wrote:
On 2015-09-12 13:27, Sampsa Laine wrote:
Uh.. By the way. Why did you ask about irc.efnet.net, when your original
post was about irc.freenode.net?
irc.freenode.net is responding just fine. Just joined #hecnet from MIM
there.
Johnny
One last bug you might want to take a look at
whenever you have time:
Why can't I connect to irc.efnet.net?
It's working right now on two other clients..
Well, it do not respond to ping, it do not seem to respond to port 6667.
Either the machine (or something along the way) is filtering out packets
from MIM, or possibly IRC is used on a different port?
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
sampsa
On 12 Sep 2015, at 12:25, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-09-12 13:04, Sampsa Laine wrote:
How do I set the term to full duplex?
In MCR you use SET /FDX=TI:
in DCL you use SET TERM/FULL
Sorry, total RSX noob here..
If you know a bit of VMS, and you are using DCL under RSX, it will be
pretty much the same commands...
Johnny
On 12 Sep 2015, at 12:00, Johnny Billquist <bqt at softjar.se> wrote:
> On 2015-09-12 12:48, Sampsa Laine wrote:
>>
>> On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
>>
>>> On 2015-09-12 12:35, Sampsa Laine wrote:
>>>> As you guys know, there's a #hecnet channel on irc.freenode.net.
>>>>
>>>> I just configured a logon called "hecirc" on PYFFLE:: that
>>>> automatically connects you to that channel via a text based UI..
>>>
>>> Or else people can log in to MIM, and just run my IRC client
>>> there. :-)
>>> (Or modify/improve it any what they see fit. It's written in
>>> BASIC+2...)
>>>
>>> Johnny
>>
>> I think there's a bug in your code, I have to hit enter like 30
>> times to get past all the MOTD msgs etc...
>
> You need to have your terminal set to full duplex, or else RSX will
> not do both reading and writing in parallel. It might also be that
> if you log in with CTERM, that driver do not support full duplex
> I/O, but I think it does.
>
> Johnny
>
> --
> Johnny Billquist || "I'm on a bus
> || on a psychedelic trip
> email: bqt at softjar.se || Reading murder books
> pdp is alive! || tryin' to stay hip" - B. Idol
> _______________________________________________
> Hecnet-list mailing list
> Hecnet-list at lists.sonic.net
> https://lists.sonic.net/mailman/listinfo/hecnet-list
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
_______________________________________________
Hecnet-list mailing list
Hecnet-list at lists.sonic.net
https://lists.sonic.net/mailman/listinfo/hecnet-list
13 Sep
13 Sep
12:16 a.m.
New subject: IRC channel on freenode.net
On 12 Sep 2015, at 12:50, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-09-12 13:33, Johnny Billquist wrote:
My bad. Sorry about that, I had problems with efnet with other clients too...
On 2015-09-12 13:27, Sampsa Laine wrote:
Uh.. By the way. Why did you ask about irc.efnet.net, when your original post was about
irc.freenode.net?
irc.freenode.net is responding just fine. Just joined #hecnet from MIM there. One last bug you might want to take a look at
whenever you have time:
Why can't I connect to irc.efnet.net?
It's working right now on two other clients..
Well, it do not respond to ping, it do not seem to respond to port 6667.
Either the machine (or something along the way) is filtering out packets
from MIM, or possibly IRC is used on a different port?
12 Sep
12 Sep
12:50 p.m.
New subject: IRC channel on freenode.net
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-09-12 12:35, Sampsa Laine wrote:
Re: MIM IRC: No commands seem to work, /JOIN, /HELP etc..
So I can't actually use it..
As you guys know, there's a #hecnet channel
on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
1:01 p.m.
New subject: IRC channel on freenode.net
On 2015-09-12 12:50, Sampsa Laine wrote:
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
That is because I haven't gone with that set of commands... Feel free to
write a variant that do. :-)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2015-09-12 12:35, Sampsa Laine wrote:
Re: MIM IRC: No commands seem to work, /JOIN, /HELP etc..
So I can't actually use it.. As you guys know, there's a #hecnet channel
on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
1:04 p.m.
New subject: IRC channel on freenode.net
Nah I'm cool with those - just as long as they work ;)
Sampsa
On 12 Sep 2015, at 12:01, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-09-12 12:50, Sampsa Laine wrote:
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
That is because I haven't gone with that set of commands... Feel free to write a
variant that do. :-)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol On 2015-09-12 12:35, Sampsa Laine wrote:
Re: MIM IRC: No commands seem to work, /JOIN, /HELP etc..
So I can't actually use it.. As you guys know, there's a #hecnet channel
on irc.freenode.net.
I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
1:30 p.m.
New subject: IRC channel on freenode.net
On 2015-09-12 13:04, Sampsa Laine wrote:
Nah I'm cool with those - just as long as they
work ;)
They do.
And just to make your life funnier/easier: the IRC client also looks for
some logical names:
IRC$NAME will be used for your nick.
IRC$HOST is the host to connect to.
IRC$COMMAND can contain a command to be executed at start.
You also have switches:
/NICK:
/HOST:
/NOCMD (if you do not want IRC$COMMAND to actually be used)
And you can ask if there are any other things you want to know.
Johnny
Sampsa
On 12 Sep 2015, at 12:01, Johnny Billquist <bqt at softjar.se> wrote:
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2015-09-12 12:50, Sampsa Laine wrote:
On 12 Sep 2015, at 11:38, Johnny Billquist <bqt at softjar.se> wrote:
That is because I haven't gone with that set of commands... Feel free to write a
variant that do. :-)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol On 2015-09-12 12:35, Sampsa Laine wrote:
> As you guys know, there's a #hecnet channel on irc.freenode.net.
>
> I just configured a logon called "hecirc" on PYFFLE:: that automatically
connects you to that channel via a text based UI..
Or else people can log in to MIM, and just run my IRC client there. :-)
(Or modify/improve it any what they see fit. It's written in BASIC+2...)
Johnny
Re: MIM IRC: No commands seem to work, /JOIN, /HELP etc..
So I can't actually use it..
3394
days inactive
3395
days old
21 comments
4 participants
participants (4)
-
bqt＠softjar.se -
hvlems＠zonnet.nl -
mcguire＠neurotica.com -
sampsa＠mac.com