Brian, I *think* you have to load the Cisco Decnet MIB in to your local machine before snmpwalk will walk the Decnet portion. I found a MIB from Cisco but was unable to get it loaded on my Linux box, so I gave up. Not that I tried really hard, though. Ian On 2013-02-07, at 9:23 AM, Brian Hechinger <wonko at 4amlunch.net> wrote: On 2/7/2013 12:04 PM, Cory Smelosky wrote: On 7 Feb 2013, at 12:03, Ian McLaughlin<ian at platinum.net> wrote: Brian, I just wanted to take a moment to say thank you for your hard work on this! The level of automation is incredible. Now we just have to get Peter on board:) I second this. Thank you. Thank you very much guys. This has been amazingly fun to do and quite a learning experience as well. I've done stuff I've never had to do before. I learned new things! :) I think that you are now the perfect source of information to assist in the Hecnet mapping project - at least for the Cisco part. I think he is as well.;) That and I wrote the NCP based mapping code, so yeah, I might just be the right guy. :) Looking at an snmpwalk of my router I'm just not seeing anything DECnet in any way. I think I'm going to have to resort to other options (all of which had issues of some sort, so we'll see what we come up with). If anyone knows what I should be looking at in SNMP or what I need to do to be able to get DECnet info out of SNMP on a cisco, PLEASE LET ME KNOW. :) -brian --- Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=1C921C6C714B11E28…