I'll boot an alpha in a minute and start Hecnet Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Sun, 14 Aug 2011 13:34:14 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] Downloading software to a DECSERVER 200 over MOP? It's a 200. I'd need the mumble.SYS too. Sampsa On 14 Aug 2011, at 13:29, hvlems at zonnet.nl wrote: What kind of decserver is it? If it is a DS100, 200 or 300 then you need the appropriate load file mumble.SYS and a boot host that runs decnet. For NCP I can give you the incantations. Hans ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] Downloading software to a DECSERVER 200 over MOP? Verzonden: 14 augustus 2011 14:15 Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa Verzonden vanaf mijn draadloze BlackBerry -toestel