On 2011-11-13 02.33, Johnny Billquist wrote: On 2011-11-12 21.49, Rob Jarratt wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Oleg Safiullin Sent: 12 November 2011 18:32 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Nodename database What is the IP address of MIM? Is there a list of IP addresses of HECnet nodes somewhere? Regards Rob I know the following addresses: MIM mim.update.uu.se CTAKAH rsx.pdp-11.nsk.ru CTEPBA rsx.pdp-11.nsk.ru:2023 (currently down) Thanks. Telnet is indeed much better. But it is a little ironic that it is better to use Telnet than DECnet to access a node on HECnet. :-) Part of the reason is that when you use telnet, you are actully going through E11, which simulates a normal DH11 serial port towards the PDP-11. So you seem (to the PDP-11) to be sitting on a proper serial port. Btw. Worth pointing out: the ber-cool command line editor ACD in RSX can only be used with the normal terminal driver. So - not usable through DECnet. It is a piece of software I really should encourage all RSX-11M-PLUS users to check out... (Although my list of stuff to spread to other RSX users are growing pretty long...) Johnny