-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Peter Lothberg Sent: Wednesday, January 09, 2013 08:49 To: hecnet at Update.UU.SE Cc: hecnet at Update.UU.SE Subject: Re: [HECnet] HECnet performance.... Peter, Everything is now set up on my end. I now have 3 Cisco tunnels. The = metric is 10 on all of them. Change the metrics to match my side: Tunnel2 Cost 10 tunnel to 192.108.200.213 Cost 20 tunnel to 199.0.131.2 Cost 20 The majority of areas now route through you according to my router: Given that we have no way of setting metrics on the "bridged ethernet" links, this is the best we can do that works in the general case. I'm now trying to get the Multinet links to 192.108.200.211 59.58 (STUPI) cleaned up and re_established, right now only the link to Legato is working properly. SG1 had cost 1 on their side instead of 10. On VMS systems anyway, LAN circuit costs are set to 4 by default. I always set Multinet circuit costs to 1 or 2 depending on whether it is the preferred route or the alternate route. I would prefer to favor the Multinet Tunnel circuits over the bridge links. They can be anywhere between 4-10 times faster for file copy operations. This is why SG1:: circuit costs are "1" in your case. -Steve Anyone else who want a cisco or Multinet HECnet tunnel set up? -P