Cisco Config Tool Update - HECnet

5 Feb 2013

Florian,

Thank you for this list - very helpful.   The problem I now see is that I don't have
enough RAM - I only appear to have 32Mb and all of these images want 64Mb.

In the morning, I'll try some of the images in the emulator - if they have the
features I need, then I will go ahead and get a RAM upgrade for the router.

Thanks again.

Ian

On 2013-02-04, at 9:51 PM, Florian Voigt <flvoigt at gmail.com> wrote:
@Ian: I compiled a list with IOS images for the 2610-2613 wich contain at least Decnet
Phase IV and IPv6.

It was generated using the Cisco Feature Navigator.
http://tools.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp
Basically, it boils down to getting an image with either the Enterprise Basic featureset
or the IP/IPX/AT/DEC/FW/IDS PLUS.

Cheers,

-Florian

On Mon, Feb 4, 2013 at 10:15 PM, Cory Smelosky <b4 at gewt.net> wrote:

On 4 Feb 2013, at 16:12, Ian McLaughlin <ian at platinum.net> wrote:

...
  Yay.   Area 9 tunnel is up: 
Yup.   It's still suffering local packet loss though...

...

 hub#sh dec nei
 Net Node       Interface                  MAC address      Flags
 0    9.1023    Tunnel52                   0000.0000.0000 A
 0    52.1023   Tunnel50                   0000.0000.0000 A
 0    42.1023   Tunnel0                     0000.0000.0000 V A
 hub#ping 9.1023

 Type escape sequence to abort.
 Sending 5, 100-byte DECnet echos to atg 0 area.node 9.1023, timeout is 5 seconds
 :
 !!!!!
 Success rate is 100 percent (5/5), round-trip min/avg/max = 84/92/120 ms

 Ian

 On 2013-02-04, at 1:01 PM, Cory Smelosky <b4 at gewt.net> wrote:

 On 4 Feb 2013, at 15:46, Cory Smelosky <b4 at gewt.net> wrote:

 On 4 Feb 2013, at 15:45, Brian Hechinger <wonko at 4amlunch.net> wrote:

  On 2/4/2013 2:58 PM, Cory Smelosky wrote:
> Looks like Brian has to update his firewall to reflect my new IP.;)

 This is not it?

 75.49.13.19 
 Interesting, that is the correct one.   The VM must've been glitching then.  
Updating the host VM now to see if I can resolve the 40-60% packet loss issue    
 --- 10.10.10.7 ping statistics ---
 50 packets transmitted, 40 packets received, 20.0% packet loss
 round-trip min/avg/max/stddev = 1.605/13.890/62.054/16.173 ms

 This was fine before the move to VMWare...

 --
 Cory Smelosky
 http://gewt.net/ Personal stuff!
 http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.

 --
 Cory Smelosky
 http://gewt.net/ Personal stuff!
 http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.

 ---
 Filter service subscribers can train this email as spam or not-spam here:   
http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=03EC4DFC6F0E11E29…

--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.

---

Filter service subscribers can train this email as spam or not-spam here
<Cisco-IOS-DecnetIV-withIPv6-2600.txt>