10 May
2021
10 May
'21
12:49 a.m.
Hi, all.
If you are running an RSX system on HECnet, and you'd like a simple
command line tool to check some information about other nodes, as it is
registered in the Datatrieve database I keep on MIM, I've written one now.
It does require that you have the PDP-11 C runtime libraries installed
(they are installed as a part of BQTCP, and also exists as a component
in RPM).
Just grab MIM::HECNET:DDB.TSK, install it, and off you go.
If you want the sources (it's really simple) they can be found at
MIM::HECNET:DDB.C and you also have a Makefile there that compiles it
for you, in case you want to experiment some.
Example run:
.ddb mim
Node: MIM
Address: 1.13
Owner: Johnny Billquist
OS: RSX-11M-PLUS V4.6
CPU: PDP-11/74 (e11)
Created: 12 Nov 2011 12:00:00
Modified: 02 May 2020 19:45:49
Loc: Uppsala, Sweden
Coord: 59.858612,17.638744
.
I just thought it could be useful to have sometimes, and it's also a
good exercise in interfacing between Datatrieve and PDP-11 C.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
10 May
10 May
2:56 a.m.
Johnny,
I just tried it and it is very cool!
I really enjoyed reading the C code as it is a very nice example
and tutorial of how to access the Datarieve DDM$$$ object via DECnet.
Well written example programs are better than reference manuals any day!
Thanks,
Mark
On May 9, 2021, at 5:49 PM, Johnny Billquist <bqt
at softjar.se> wrote:
Hi, all.
If you are running an RSX system on HECnet, and you'd like a simple command line tool
to check some information about other nodes, as it is registered in the Datatrieve
database I keep on MIM, I've written one now.
It does require that you have the PDP-11 C runtime libraries installed (they are
installed as a part of BQTCP, and also exists as a component in RPM).
Just grab MIM::HECNET:DDB.TSK, install it, and off you go.
If you want the sources (it's really simple) they can be found at MIM::HECNET:DDB.C
and you also have a Makefile there that compiles it for you, in case you want to
experiment some.
Example run:
.ddb mim
Node: MIM
Address: 1.13
Owner: Johnny Billquist
OS: RSX-11M-PLUS V4.6
CPU: PDP-11/74 (e11)
Created: 12 Nov 2011 12:00:00
Modified: 02 May 2020 19:45:49
Loc: Uppsala, Sweden
Coord: 59.858612,17.638744
.
I just thought it could be useful to have sometimes, and it's also a good exercise in
interfacing between Datatrieve and PDP-11 C.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
3:17 a.m.
Johnny,
There is a serious problem with your database thing, it
must be corrupting the GEO coordinates:
59.858612 17.638744 is the central square in Uppsala, MIN::
is located at abt:
59.84145130853427, 17.647929315759676
--P
(I did my basic military service in one of the buildings where UU is
located today,and we had several things that used lat/long that we
trained on in the field between Dag Hammarskjolds V}g and the buildings...)
----- Original Message -----
From: "bqt" <bqt at softjar.se>
To: "hecnet" <hecnet at Update.UU.SE>
Sent: Sunday, May 9, 2021 6:49:47 PM
Subject: [HECnet] Central nodename database lookup tool
Hi, all.
If you are running an RSX system on HECnet, and you'd like a simple
command line tool to check some information about other nodes, as it is
registered in the Datatrieve database I keep on MIM, I've written one now.
It does require that you have the PDP-11 C runtime libraries installed
(they are installed as a part of BQTCP, and also exists as a component
in RPM).
Just grab MIM::HECNET:DDB.TSK, install it, and off you go.
If you want the sources (it's really simple) they can be found at
MIM::HECNET:DDB.C and you also have a Makefile there that compiles it
for you, in case you want to experiment some.
Example run:
.ddb mim
Node: MIM
Address: 1.13
Owner: Johnny Billquist
OS: RSX-11M-PLUS V4.6
CPU: PDP-11/74 (e11)
Created: 12 Nov 2011 12:00:00
Modified: 02 May 2020 19:45:49
Loc: Uppsala, Sweden
Coord: 59.858612,17.638744
.
I just thought it could be useful to have sometimes, and it's also a
good exercise in interfacing between Datatrieve and PDP-11 C.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
3:37 a.m.
No corruption. I just haven't bothered putting any data in with more
precision. :-)
Basically, for almost all data, I've just taken the lat/long of the
city, with about 6 digits of precision.
Not sure if we really want to have that much more precision on it...
Johnny
On 2021-05-10 03:17, Peter Lothberg wrote:
Johnny,
There is a serious problem with your database thing, it
must be corrupting the GEO coordinates:
59.858612 17.638744 is the central square in Uppsala, MIN::
is located at abt:
59.84145130853427, 17.647929315759676
--P
(I did my basic military service in one of the buildings where UU is
located today,and we had several things that used lat/long that we
trained on in the field between Dag Hammarskjolds V}g and the buildings...)
----- Original Message -----
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
From: "bqt" <bqt at softjar.se>
To: "hecnet" <hecnet at Update.UU.SE>
Sent: Sunday, May 9, 2021 6:49:47 PM
Subject: [HECnet] Central nodename database lookup tool
> Hi, all.
>
> If you are running an RSX system on HECnet, and you'd like a simple
> command line tool to check some information about other nodes, as it is
> registered in the Datatrieve database I keep on MIM, I've written one now.
>
> It does require that you have the PDP-11 C runtime libraries installed
> (they are installed as a part of BQTCP, and also exists as a component
> in RPM).
>
> Just grab MIM::HECNET:DDB.TSK, install it, and off you go.
> If you want the sources (it's really simple) they can be found at
> MIM::HECNET:DDB.C and you also have a Makefile there that compiles it
> for you, in case you want to experiment some.
>
> Example run:
>
> .ddb mim
> Node: MIM
> Address: 1.13
> Owner: Johnny Billquist
> OS: RSX-11M-PLUS V4.6
> CPU: PDP-11/74 (e11)
> Created: 12 Nov 2011 12:00:00
> Modified: 02 May 2020 19:45:49
> Loc: Uppsala, Sweden
> Coord: 59.858612,17.638744
>
> .
>
> I just thought it could be useful to have sometimes, and it's also a
> good exercise in interfacing between Datatrieve and PDP-11 C.
>
> Johnny
>
> --
> Johnny Billquist || "I'm on a bus
> || on a psychedelic trip
> email: bqt at softjar.se || Reading murder books
> pdp is alive! || tryin' to stay hip" - B. Idol 
3:42 a.m.
I think there is a good argument to be made for leaving it at that level of precision. I
always prefer to have my current ICBM coordinates be off by a safe distance. :-)
Zane
On May 9, 2021, at 6:37 PM, Johnny Billquist <bqt
at softjar.se> wrote:
No corruption. I just haven't bothered putting any data in with more precision. :-)
Basically, for almost all data, I've just taken the lat/long of the city, with about
6 digits of precision.
Not sure if we really want to have that much more precision on it...
3:46 a.m.
Could be argued if that is a safe distance wrt ICBMs. :-)
However, it's definitely good enough safe distance from unwanted callers.
Johnny
On 2021-05-10 03:42, Zane Healy wrote:
I think there is a good argument to be made for
leaving it at that level
of precision. ?I always prefer to have my current ICBM coordinates be
off by a safe distance. :-)
Zane
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On May 9, 2021, at 6:37 PM, Johnny Billquist
<bqt at softjar.se
<mailto:bqt at softjar.se>> wrote:
No corruption. I just haven't bothered putting any data in with more
precision. :-)
Basically, for almost all data, I've just taken the lat/long of the
city, with about 6 digits of precision.
Not sure if we really want to have that much more precision on it...
3:45 a.m.
By the way, the coordinates you gave a pretty good, but the machine hall
is actually in the northwest corner of the building.
59.841642, 17.647709 is pretty much where the machine sits.
On 2021-05-10 03:17, Peter Lothberg wrote:
Johnny,
There is a serious problem with your database thing, it
must be corrupting the GEO coordinates:
59.858612 17.638744 is the central square in Uppsala, MIN::
is located at abt:
59.84145130853427, 17.647929315759676
--P
(I did my basic military service in one of the buildings where UU is
located today,and we had several things that used lat/long that we
trained on in the field between Dag Hammarskjolds V}g and the buildings...)
----- Original Message -----
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
From: "bqt" <bqt at softjar.se>
To: "hecnet" <hecnet at Update.UU.SE>
Sent: Sunday, May 9, 2021 6:49:47 PM
Subject: [HECnet] Central nodename database lookup tool
> Hi, all.
>
> If you are running an RSX system on HECnet, and you'd like a simple
> command line tool to check some information about other nodes, as it is
> registered in the Datatrieve database I keep on MIM, I've written one now.
>
> It does require that you have the PDP-11 C runtime libraries installed
> (they are installed as a part of BQTCP, and also exists as a component
> in RPM).
>
> Just grab MIM::HECNET:DDB.TSK, install it, and off you go.
> If you want the sources (it's really simple) they can be found at
> MIM::HECNET:DDB.C and you also have a Makefile there that compiles it
> for you, in case you want to experiment some.
>
> Example run:
>
> .ddb mim
> Node: MIM
> Address: 1.13
> Owner: Johnny Billquist
> OS: RSX-11M-PLUS V4.6
> CPU: PDP-11/74 (e11)
> Created: 12 Nov 2011 12:00:00
> Modified: 02 May 2020 19:45:49
> Loc: Uppsala, Sweden
> Coord: 59.858612,17.638744
>
> .
>
> I just thought it could be useful to have sometimes, and it's also a
> good exercise in interfacing between Datatrieve and PDP-11 C.
>
> Johnny
>
> --
> Johnny Billquist || "I'm on a bus
> || on a psychedelic trip
> email: bqt at softjar.se || Reading murder books
> pdp is alive! || tryin' to stay hip" - B. Idol 
11 May
11 May
9:12 a.m.
Cool!
It's time to update the info.
CTAKAH is now in Innopolis :)
--
Node: CTAKAH
Address: 62.637
Owner: Oleg Safiullin
OS: RSX-11M-PLUS V4.6
CPU: PDP-11/94 (E11)
Created: 31 Jan 2012 17:48:53
Modified: 02 May 2020 19:45:48
Loc: Novosibirsk, Russia
Coord: 55.049999,82.949997
On 10/05/2021 01:49, Johnny Billquist wrote:
Hi, all.
If you are running an RSX system on HECnet, and you'd like a simple command line tool
to check some information about other nodes, as it is registered in the Datatrieve
database I keep on MIM, I've written one now.
It does require that you have the PDP-11 C runtime libraries installed (they are
installed as a part of BQTCP, and also exists as a component in RPM).
Just grab MIM::HECNET:DDB.TSK, install it, and off you go.
If you want the sources (it's really simple) they can be found at MIM::HECNET:DDB.C
and you also have a Makefile there that compiles it for you, in case you want to
experiment some.
Example run:
.ddb mim
Node:???? MIM
Address:? 1.13
Owner:??? Johnny Billquist
OS:?????? RSX-11M-PLUS V4.6
CPU:????? PDP-11/74 (e11)
Created:? 12 Nov 2011 12:00:00
Modified: 02 May 2020 19:45:49
Loc:????? Uppsala, Sweden
Coord:??? 59.858612,17.638744
.
I just thought it could be useful to have sometimes, and it's also a good exercise in
interfacing between Datatrieve and PDP-11 C.
? Johnny
1:23 p.m.
Hi.
On 2021-05-11 09:12, Oleg Safiullin wrote:
Cool!
It's time to update the info.
CTAKAH is now in Innopolis :)
What is Innopolis? A city?
Johnny
--
Node:???? CTAKAH
Address:? 62.637
Owner:??? Oleg Safiullin
OS:?????? RSX-11M-PLUS V4.6
CPU:????? PDP-11/94 (E11)
Created:? 31 Jan 2012 17:48:53
Modified: 02 May 2020 19:45:48
Loc:????? Novosibirsk, Russia
Coord:??? 55.049999,82.949997
On 10/05/2021 01:49, Johnny Billquist wrote:
> Hi, all.
>
> If you are running an RSX system on HECnet, and you'd like a simple
> command line tool to check some information about other nodes, as it
> is registered in the Datatrieve database I keep on MIM, I've written
> one now.
>
> It does require that you have the PDP-11 C runtime libraries installed
> (they are installed as a part of BQTCP, and also exists as a component
> in RPM).
>
> Just grab MIM::HECNET:DDB.TSK, install it, and off you go.
> If you want the sources (it's really simple) they can be found at
> MIM::HECNET:DDB.C and you also have a Makefile there that compiles it
> for you, in case you want to experiment some.
>
> Example run:
>
> .ddb mim
> Node:???? MIM
> Address:? 1.13
> Owner:??? Johnny Billquist
> OS:?????? RSX-11M-PLUS V4.6
> CPU:????? PDP-11/74 (e11)
> Created:? 12 Nov 2011 12:00:00
> Modified: 02 May 2020 19:45:49
> Loc:????? Uppsala, Sweden
> Coord:??? 59.858612,17.638744
>
> .
>
> I just thought it could be useful to have sometimes, and it's also a
> good exercise in interfacing between Datatrieve and PDP-11 C.
>
> ?? Johnny
>
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
1:25 p.m.
Ah. Never mind. I believe Innopolis is indeed a city. Updating location...
Johnny
On 2021-05-11 09:12, Oleg Safiullin wrote:
Cool!
It's time to update the info.
CTAKAH is now in Innopolis :)
--
Node:???? CTAKAH
Address:? 62.637
Owner:??? Oleg Safiullin
OS:?????? RSX-11M-PLUS V4.6
CPU:????? PDP-11/94 (E11)
Created:? 31 Jan 2012 17:48:53
Modified: 02 May 2020 19:45:48
Loc:????? Novosibirsk, Russia
Coord:??? 55.049999,82.949997
On 10/05/2021 01:49, Johnny Billquist wrote:
> Hi, all.
>
> If you are running an RSX system on HECnet, and you'd like a simple
> command line tool to check some information about other nodes, as it
> is registered in the Datatrieve database I keep on MIM, I've written
> one now.
>
> It does require that you have the PDP-11 C runtime libraries installed
> (they are installed as a part of BQTCP, and also exists as a component
> in RPM).
>
> Just grab MIM::HECNET:DDB.TSK, install it, and off you go.
> If you want the sources (it's really simple) they can be found at
> MIM::HECNET:DDB.C and you also have a Makefile there that compiles it
> for you, in case you want to experiment some.
>
> Example run:
>
> .ddb mim
> Node:???? MIM
> Address:? 1.13
> Owner:??? Johnny Billquist
> OS:?????? RSX-11M-PLUS V4.6
> CPU:????? PDP-11/74 (e11)
> Created:? 12 Nov 2011 12:00:00
> Modified: 02 May 2020 19:45:49
> Loc:????? Uppsala, Sweden
> Coord:??? 59.858612,17.638744
>
> .
>
> I just thought it could be useful to have sometimes, and it's also a
> good exercise in interfacing between Datatrieve and PDP-11 C.
>
> ?? Johnny
>
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
1325
days inactive
1327
days old
10 comments
5 participants
participants (5)
-
bqt＠softjar.se -
form＠pdp-11.online -
healyzh＠avanthar.com -
mark＠matlockfamily.com -
roll＠stupi.com