4 May
2015
4 May
'15
11:37 p.m.
Yes, if it is not needed to be picked up right away.
-------- Original message --------
From: Pontus Pihlgren <pontus at Update.UU.SE>
Date: 04/05/2015 23:54 (GMT+02:00)
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] RP07s to a good home...
On Mon, May 04, 2015 at 11:18:18PM +0300, Kari Uusim?ki wrote:
Hi,
I'm interested in some of the stuff. The RP07 would be one of them.
How should we go forward with the discussion?
I'm just about to hit the sack. I'll send a mail to you, Ragge
and the others tomorrow.
Will you be able to pick it up?
/P
Kari
On 4.5.2015 23:05, Pontus wrote:
On 05/04/2015 07:54 PM, Pontus Pihlgren wrote:
I've been working out a deal with Ragge and
several others for a
few weeks now after announcing on CC-tech.
I and Ragge strongly prefer that you go through me.
The RP07 are still unclaimed and so is a lot more. Let me know
if you are seriously interested and I'll fill you in and include
you in future talks.
/P
Hi
I realize now that I might have worded the above a bit strong. You are
welcome to spread this as much as you want. But it will probably benefit
all if I'm in the loop.
Anyway, now that I have a proper keyboard (not just my phones onscreen
one) I can give you some more details. It's the computer club in Lule?
that is cleaning out old "junk". Here are some pictures:
http://brain.brokenbrain.se/skrot_dh1/
Take a break and look at them now.
Now that you are back, here is what is shown, more or less.
Spoken for:
* DECsystem 5500
* Nord-10 crates
* ND-100 cards
* HAWK-disks
* Terminalen for Nord-10
* 10-20 1/2" band
* A bunch of cabling, docs and 5 1/4" floppies with software for Nord
computers.
* DEC 8400
* DEC PRO380
* RA72
* Unibus och BiBus-kort and some XMI.
* RX01 -floppies
* 4000/500
* 4000/90 (memory removed)
* infoserver 100
* 2 * R215F
* RX01/02-floppies
* 11/750 without PSU
Probably spoken for (we are working out the shipping details):
* DEC 8400
* MicroVAX 8354
* TU81 /w RA82
Not spoken for:
* 4000/60
* 1/2" tapes (lot of them)
* Two RA90's
* MV3900 /w RA82 and RL02 on top.
* VAXstation 3100
* VAXserver 3100
* Two Vaxstation 3100/76
* HSC90
* Two RP07, one spare part.
* MikroVAX 3800
* MicroVAX only marked 640QR?
* Lots of CI and SDI cabling.
* 4000/300 (looked empty unfortunately)
Before you ask the brief case with test equipment on picture
20150407_100342.jpg is an alignment tool for an RP06 and Ragge will keep
it.
Regarding shipping, there are two cars going from Lule? to Uppsala that
can bring a moderate amount of gear.
I'll answer any questions you might have as best I can.
Regards,
Pontus.
.
4 May
4 May
11:41 p.m.
You do know how much an RP07 weighs, right? (just checking)
-Dave
On 05/04/2015 05:37 PM, Kari Uusim?ki wrote:
Yes, if it is not needed to be picked up right away.
-------- Original message --------
From: Pontus Pihlgren <pontus at Update.UU.SE>
Date: 04/05/2015 23:54 (GMT+02:00)
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] RP07s to a good home...
On Mon, May 04, 2015 at 11:18:18PM +0300, Kari Uusim?ki wrote:
--
Dave McGuire, AK4HZ
New Kensington, PA
Hi,
I'm interested in some of the stuff. The RP07 would be one of them.
How should we go forward with the discussion?
I'm just about to hit the sack. I'll send a mail to you, Ragge
and the others tomorrow.
Will you be able to pick it up?
/P
>
>
> Kari
>
>
>
> On 4.5.2015 23:05, Pontus wrote:
> >On 05/04/2015 07:54 PM, Pontus Pihlgren wrote:
> >>I've been working out a deal with Ragge and several others for a
> >>few weeks now after announcing on CC-tech.
> >>
> >>I and Ragge strongly prefer that you go through me.
> >>
> >>The RP07 are still unclaimed and so is a lot more. Let me know
> >>if you are seriously interested and I'll fill you in and include
> >>you in future talks.
> >>
> >>/P
> >>
> >
> >
> >Hi
> >
> >I realize now that I might have worded the above a bit strong. You are
> >welcome to spread this as much as you want. But it will probably benefit
> >all if I'm in the loop.
> >
> >Anyway, now that I have a proper keyboard (not just my phones onscreen
> >one) I can give you some more details. It's the computer club in Lule?
> >that is cleaning out old "junk". Here are some pictures:
> >
> >http://brain.brokenbrain.se/skrot_dh1/
> >
> >Take a break and look at them now.
> >
> >Now that you are back, here is what is shown, more or less.
> >
> >Spoken for:
> >
> > * DECsystem 5500
> > * Nord-10 crates
> > * ND-100 cards
> > * HAWK-disks
> > * Terminalen for Nord-10
> > * 10-20 1/2" band
> > * A bunch of cabling, docs and 5 1/4" floppies with software for Nord
> >computers.
> > * DEC 8400
> > * DEC PRO380
> > * RA72
> > * Unibus och BiBus-kort and some XMI.
> > * RX01 -floppies
> > * 4000/500
> > * 4000/90 (memory removed)
> > * infoserver 100
> > * 2 * R215F
> > * RX01/02-floppies
> > * 11/750 without PSU
> >
> >Probably spoken for (we are working out the shipping details):
> >
> > * DEC 8400
> > * MicroVAX 8354
> > * TU81 /w RA82
> >
> >Not spoken for:
> >
> > * 4000/60
> > * 1/2" tapes (lot of them)
> > * Two RA90's
> > * MV3900 /w RA82 and RL02 on top.
> > * VAXstation 3100
> > * VAXserver 3100
> > * Two Vaxstation 3100/76
> > * HSC90
> > * Two RP07, one spare part.
> > * MikroVAX 3800
> > * MicroVAX only marked 640QR?
> > * Lots of CI and SDI cabling.
> > * 4000/300 (looked empty unfortunately)
> >
> >Before you ask the brief case with test equipment on picture
> >20150407_100342.jpg is an alignment tool for an RP06 and Ragge will keep
> >it.
> >
> >Regarding shipping, there are two cars going from Lule? to Uppsala that
> >can bring a moderate amount of gear.
> >
> >I'll answer any questions you might have as best I can.
> >
> >Regards,
> >Pontus.
> >
> >.
> >
>
5 May
5 May
5:49 a.m.
I do as I have one already.
Kari
On 5.5.2015 0:41, Dave McGuire wrote:
You do know how much an RP07 weighs, right? (just checking)
-Dave
On 05/04/2015 05:37 PM, Kari Uusim?ki wrote:
Yes, if it is not needed to be picked up right
away.
-------- Original message --------
From: Pontus Pihlgren <pontus at Update.UU.SE>
Date: 04/05/2015 23:54 (GMT+02:00)
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] RP07s to a good home...
On Mon, May 04, 2015 at 11:18:18PM +0300, Kari Uusim?ki wrote:
Hi,
I'm interested in some of the stuff. The RP07 would be one of them.
How should we go forward with the discussion?
I'm just about to hit the sack. I'll send a mail to you, Ragge
and the others tomorrow.
Will you be able to pick it up?
/P
>
>
> Kari
>
>
>
> On 4.5.2015 23:05, Pontus wrote:
>> On 05/04/2015 07:54 PM, Pontus Pihlgren wrote:
>>> I've been working out a deal with Ragge and several others for a
>>> few weeks now after announcing on CC-tech.
>>>
>>> I and Ragge strongly prefer that you go through me.
>>>
>>> The RP07 are still unclaimed and so is a lot more. Let me know
>>> if you are seriously interested and I'll fill you in and include
>>> you in future talks.
>>>
>>> /P
>>>
>>
>>
>> Hi
>>
>> I realize now that I might have worded the above a bit strong. You are
>> welcome to spread this as much as you want. But it will probably benefit
>> all if I'm in the loop.
>>
>> Anyway, now that I have a proper keyboard (not just my phones onscreen
>> one) I can give you some more details. It's the computer club in Lule?
>> that is cleaning out old "junk". Here are some pictures:
>>
>> http://brain.brokenbrain.se/skrot_dh1/
>>
>> Take a break and look at them now.
>>
>> Now that you are back, here is what is shown, more or less.
>>
>> Spoken for:
>>
>> * DECsystem 5500
>> * Nord-10 crates
>> * ND-100 cards
>> * HAWK-disks
>> * Terminalen for Nord-10
>> * 10-20 1/2" band
>> * A bunch of cabling, docs and 5 1/4" floppies with software for Nord
>> computers.
>> * DEC 8400
>> * DEC PRO380
>> * RA72
>> * Unibus och BiBus-kort and some XMI.
>> * RX01 -floppies
>> * 4000/500
>> * 4000/90 (memory removed)
>> * infoserver 100
>> * 2 * R215F
>> * RX01/02-floppies
>> * 11/750 without PSU
>>
>> Probably spoken for (we are working out the shipping details):
>>
>> * DEC 8400
>> * MicroVAX 8354
>> * TU81 /w RA82
>>
>> Not spoken for:
>>
>> * 4000/60
>> * 1/2" tapes (lot of them)
>> * Two RA90's
>> * MV3900 /w RA82 and RL02 on top.
>> * VAXstation 3100
>> * VAXserver 3100
>> * Two Vaxstation 3100/76
>> * HSC90
>> * Two RP07, one spare part.
>> * MikroVAX 3800
>> * MicroVAX only marked 640QR?
>> * Lots of CI and SDI cabling.
>> * 4000/300 (looked empty unfortunately)
>>
>> Before you ask the brief case with test equipment on picture
>> 20150407_100342.jpg is an alignment tool for an RP06 and Ragge will keep
>> it.
>>
>> Regarding shipping, there are two cars going from Lule? to Uppsala that
>> can bring a moderate amount of gear.
>>
>> I'll answer any questions you might have as best I can.
>>
>> Regards,
>> Pontus.
>>
>> .
>>
>
4:32 p.m.
Oh ok, good. (and...I'm jealous!!)
-Dave
On 05/04/2015 11:49 PM, Kari Uusim?ki wrote:
I do as I have one already.
Kari
On 5.5.2015 0:41, Dave McGuire wrote:
--
Dave McGuire, AK4HZ
New Kensington, PA
You do know how much an RP07 weighs, right? (just checking)
-Dave
On 05/04/2015 05:37 PM, Kari Uusim?ki wrote:
Yes, if it is not needed to be picked up right
away.
-------- Original message --------
From: Pontus Pihlgren <pontus at Update.UU.SE>
Date: 04/05/2015 23:54 (GMT+02:00)
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] RP07s to a good home...
On Mon, May 04, 2015 at 11:18:18PM +0300, Kari Uusim?ki wrote:
Hi,
I'm interested in some of the stuff. The RP07 would be one of them.
How should we go forward with the discussion?
I'm just about to hit the sack. I'll send a mail to you, Ragge
and the others tomorrow.
Will you be able to pick it up?
/P
>
>
> Kari
>
>
>
> On 4.5.2015 23:05, Pontus wrote:
>> On 05/04/2015 07:54 PM, Pontus Pihlgren wrote:
>>> I've been working out a deal with Ragge and several others for a
>>> few weeks now after announcing on CC-tech.
>>>
>>> I and Ragge strongly prefer that you go through me.
>>>
>>> The RP07 are still unclaimed and so is a lot more. Let me know
>>> if you are seriously interested and I'll fill you in and include
>>> you in future talks.
>>>
>>> /P
>>>
>>
>>
>> Hi
>>
>> I realize now that I might have worded the above a bit strong. You are
>> welcome to spread this as much as you want. But it will probably
>> benefit
>> all if I'm in the loop.
>>
>> Anyway, now that I have a proper keyboard (not just my phones onscreen
>> one) I can give you some more details. It's the computer club in Lule?
>> that is cleaning out old "junk". Here are some pictures:
>>
>> http://brain.brokenbrain.se/skrot_dh1/
>>
>> Take a break and look at them now.
>>
>> Now that you are back, here is what is shown, more or less.
>>
>> Spoken for:
>>
>> * DECsystem 5500
>> * Nord-10 crates
>> * ND-100 cards
>> * HAWK-disks
>> * Terminalen for Nord-10
>> * 10-20 1/2" band
>> * A bunch of cabling, docs and 5 1/4" floppies with software for
>> Nord
>> computers.
>> * DEC 8400
>> * DEC PRO380
>> * RA72
>> * Unibus och BiBus-kort and some XMI.
>> * RX01 -floppies
>> * 4000/500
>> * 4000/90 (memory removed)
>> * infoserver 100
>> * 2 * R215F
>> * RX01/02-floppies
>> * 11/750 without PSU
>>
>> Probably spoken for (we are working out the shipping details):
>>
>> * DEC 8400
>> * MicroVAX 8354
>> * TU81 /w RA82
>>
>> Not spoken for:
>>
>> * 4000/60
>> * 1/2" tapes (lot of them)
>> * Two RA90's
>> * MV3900 /w RA82 and RL02 on top.
>> * VAXstation 3100
>> * VAXserver 3100
>> * Two Vaxstation 3100/76
>> * HSC90
>> * Two RP07, one spare part.
>> * MikroVAX 3800
>> * MicroVAX only marked 640QR?
>> * Lots of CI and SDI cabling.
>> * 4000/300 (looked empty unfortunately)
>>
>> Before you ask the brief case with test equipment on picture
>> 20150407_100342.jpg is an alignment tool for an RP06 and Ragge will
>> keep
>> it.
>>
>> Regarding shipping, there are two cars going from Lule? to Uppsala
>> that
>> can bring a moderate amount of gear.
>>
>> I'll answer any questions you might have as best I can.
>>
>> Regards,
>> Pontus.
>>
>> .
>>
>
3491
days inactive
3492
days old
3 comments
2 participants
participants (2)
-
mcguire＠neurotica.com -
uusimaki＠exdecfinland.org