Cory Smelosky <b4 at gewt.net> writes: On Fri, 4 Oct 2013, Brian Schenkenberger, VAXman- wrote: Sampsa Laine <sampsa at mac.com> writes: sampsa <sampsa at mac.com> mobile +358 40 7208932 On 4 Oct 2013, at 18:34, "Brian Schenkenberger, VAXman-" = <system at TMESIS.COM> wrote: Gregg Levine <gregg.drwho8 at gmail.com> writes: =20 Hello! Are there any other settings you can tweak? Especially since I believe that place sitter might be CRT based, so there might be ones for the contrast and bright. (Remember those? They were found on classic SDTV sets.) =20 There should be brightness and contrast controls on the right hand (as = facing the display) side of the terminal. =20 Tried all those, no help. There is one more on the board. You may need an adjustment tool for it. It's a small pot near the front and near the brightness and contrast knobs. Does the VT320 have a similar pot for width and height? The width and height are off on mine. Inside on the board. Google for the VT320 service guide and it should tell you the alignment procedure. -- VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG Well I speak to machines with the voice of humanity.