Ok, 5 lines. :) first you need to enable DECnet routing: decnet routing X.Y (where X.Y is the DECnet address you want to give it) decnet node-type area Then you need to add this to the interface that talks to your DECnet LAN segment: decnet cost 10 Then you need to allow my config tool to talk to your router: access-list 10 permit 37.59.44.141 snmp-server community <community name> RW 10 Then you just need to get me all that info I asked for and we should be good. The machine running the config tool is down right now so I'm in no hurry. :) -brian On Mon, Sep 23, 2013 at 11:37:23PM +0100, Jarratt RMA wrote: I have no idea how to set up GRE, but I believe the DECbrouter I have can do it, does anyone have any pointers on how to set it up? I will also want to add GRE to my user mode router when I get chance, but for DEC Legacy using the brouter might be nice. Once I can get it (the brouter) working let me know how to update your db with the IP address. Question though, does the IP address change have to be made manually or could it be automatic? Thanks Rob On 22 September 2013 23:32, Brian Hechinger <wonko at 4amlunch.net> wrote: If you want to use the GRE tunnels I can give you access to the db to update your IP. -brian On Sep 22, 2013, at 16:18, "Robert Jarratt" <robert.jarratt at ntlworld.com> wrote: I don't have multinet and I have never installed it. What protocol does it use under the covers, is it something proprietary to multinet? Could I get the DECbrouter I bought recently to interoperate with your side? If it is not too hard I could try implementing Multinet interop in my user mode router. Regards Rob From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Steve Davidson Sent: 22 September 2013 11:43 To: hecnet at Update.UU.SE Subject: RE: [HECnet] Connecting to HECnet from DEC Legacy 19-20 Oct If you decide to use Multinet and have access to a dynamic DNS name, then I can link SG1:: to it via the SW at this end. It is completely automated. If we can manage to install Multinet on GORVAX:: then the links would be even faster. -Steve _____ From: owner-hecnet at Update.UU.SE on behalf of Mark Wickens Sent: Sat 9/21/2013 16:18 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Connecting to HECnet from DEC Legacy 19-20 Oct On 21/09/2013 21:12, Robert Jarratt wrote: I am hoping to connect to HECnet from the DEC Legacy event in October, hopefully connecting a few interesting systems to HECnet and allowing attendees to explore HECnet. I would be using a USB 3G device to do this, so I wouldn't know my IP until the day itself. Is there anyone with a bridge on HECnet who would be available during UK daytime on those days to configure their bridge to peer with me? There may be more than one change of IP address over the course of the weekend though. Are there any other options? Thanks Rob Rob, Obviously I will have my home bridge going, so maybe we can keep this in-house with a bit of experimentation? I think this is maybe what I did last time, I really can't remember but it makes a lot of sense and it does shake my memory a bit! Mark. <winmail.dat>