Igor I d be happy to have LEGATO connect to you with a Multinet tunnel. Since you are going to operate as a Level 1 router, that means you will have to be in the same area as LEGATO. That s not a problem since there s plenty of address space available, and I ll just reserve you a block from 2.300 thru 2.309. Sounds like you only have three machines, so that should be plenty. You ll need to register your node names with Johnny (just email them to this list) so he can add them to the master database. Send me an email off list when you have Multinet set up on your end and I ll turn on the link. Bob Armstrong From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mirvaleev Igor (????????? ????? ????????????) Sent: Tuesday, June 26, 2012 1:15 AM To: hecnet at Update.UU.SE Subject: [HECnet] Connect to HECnet Hello all! I would like to connect my 3 machines to HECnet. One of them i plan to configure as Level1 router and connect to HECnet using Multinet or TCPware under OpenVMS. Is anybody, who use the same software, can connect my machines to its area? Machines located in Moscow, my static IP is 81.200.30.73 Thanks, Igor