-----Original Message----- From: owner-hecnet at Update.UU.SE on behalf of Marc Chametzky Sent: Thu 3/3/2011 15:19 To: hecnet at Update.UU.SE Subject: [HECnet] Can't remember how I'm connected to HECnet This is embarrassing. I've got a DECnet-over-IP connection set up on my SIMH VAX. It had been working, but then I switched firewalls some time back and messed up the configuration so that packets from my VAX were coming from the wrong IP address. I only recently discovered that this was the problem and have now fixed it. My TCP-0-0 circuit remains in the "-starting" state, so either I've still got something wrong or maybe the other end of the circuit is disabled since I was misconfigured for so long. Another possibility is that the other end's IP address changed and I haven't updated my side. My problem is that I don't recall who set up the connection for me to be on HECnet. So, if you've got a DECnet-over-IP connection configured to DUSTY, would you please help me get reconnected... Pretty please? :-) --Marc I forgot to ask... Where are you located? If you are in the Eastern US (or Eastern Canada) then you can connect to my systems. -Steve