On 29 Oct 2012, at 17:48, Cory Smelosky <b4 at gewt.net> wrote: On 29 Oct 2012, at 17:03, Cory Smelosky <b4 at gewt.net> wrote: On 29 Oct 2012, at 16:55, Marc Chametzky <marc at bluevine.net> wrote: 29-Oct-2012 13:49:58 ***BUGCHK KNIADR*** Monitor address does not match NIA20 address, Data: 0, 524000040000, 524000040000, 77502000 0000 Hmmm, Where'd I screw up? the MAC and configured DECnet addresses match. There are three places I'd check: 1) The actual network Interface on the Unix system (should be able to verify with ifconfig) Had it bind to eth0 instead of vmbr0, the error went away and it can see an adjacent node. 2) The address configured in klt20.ini (assuming you're using the Panda distribution) That is now configured correctly. Seems this problem can easily be solved by just bringing up another VM, I have the RAM and DISK. ;) Got it running in a VM but now? https://www.refheap.com/paste/9b3f3fb3baae4d8ef23814976 Everything seems configured correctly, but it doesn't work. What'd I miss? I have no idea what I missed or how I fixed it, but it works now. It seems I needed to install some ia32 libs. 3) The DECnet address specified in 7-1-CONFIG.CMD --Marc